Package: tcpd
Status: install ok installed
Priority: important
Section: base
Installed-Size: 220
Maintainer: Anthony Towns <ajt@debian.org>
Source: tcp-wrappers
Version: 7.6.dbs-8
Replaces: libwrap0 (<< 7.6-8)
Depends: libc6 (>= 2.3.2.ds1-4), libwrap0 (>= 7.6-1.1), debconf (>= 0.5) | debconf-2.0
Conflicts: netbase (<< 3.16-1)
Description: Wietse Venema's TCP wrapper utilities
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests. Security options are:
 access control per host, domain and/or service; detection of
 host name spoofing or host address spoofing; booby traps to
 implement an early-warning system.

Package: mozilla-thunderbird-dev
Status: purge ok not-installed
Priority: optional
Section: mail

Package: libtext-wrapi18n-perl
Status: install ok installed
Priority: important
Section: perl
Installed-Size: 76
Maintainer: Tomohiro KUBOTA <kubota@debian.org>
Architecture: all
Version: 0.06-1
Depends: libtext-charwidth-perl
Description: internationalized substitute of Text::Wrap
 This module is a substitution for Text::Wrap, supporting
 multibyte characters such as UTF-8, EUC-JP, and GB2312, fullwidth
 characters such as east Asian characters, combining characters
 such as diacritical marks and Thai, and languages which don't
 use whitespaces between words such as Chinese and Japanese.
 .
 It provides wrap().

Package: emacs21-bin-common
Status: purge ok not-installed
Priority: optional
Section: editors

Package: vacation
Status: install ok installed
Priority: standard
Section: mail
Installed-Size: 72
Maintainer: Marco d'Itri <md@linux.it>
Architecture: powerpc
Version: 3.3.0
Replaces: bsdmainutils (<= 4.8)
Depends: libc6 (>= 2.3.1-1), libdb4.1
Conflicts: bsdmainutils (<= 4.8)
Description: email autoresponder
 Vacation returns a message to the sender of a message telling them that
 you are currently not reading your mail.
 .
 This program is derived from the NetBSD version and has most of the
 features present in the Linux, Solaris, AIX and *BSD versions.

Package: ipppd
Status: purge ok not-installed
Priority: extra
Section: net

Package: debconf
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 1340
Maintainer: Joey Hess <joeyh@debian.org>
Architecture: all
Version: 1.4.30.13
Replaces: debconf-tiny
Provides: debconf-2.0
Depends: debconf-i18n | debconf-english
Pre-Depends: perl-base (>= 5.6.1-4)
Recommends: apt-utils (>= 0.5.1)
Suggests: debconf-doc, debconf-utils, whiptail | dialog | gnome-utils, libterm-readline-gnu-perl, libgnome2-perl, libqt-perl, libnet-ldap-perl, perl
Conflicts: cdebconf, debconf-tiny, apt (<< 0.3.12.1), menu (<= 2.1.3-1), dialog (<< 0.9b-20020814-1), whiptail (<< 0.51.4-11), whiptail-utf8 (<= 0.50.17-13), debconf-utils (<< 1.3.22)
Conffiles:
 /etc/debconf.conf eb448d7ec3a6258c8601e6b27284b791
 /etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73
Description: Debian configuration management system
 Debconf is a configuration management system for debian packages. Packages
 use Debconf to ask questions when they are installed.

Package: vrms
Status: purge ok not-installed
Priority: optional
Section: admin

Package: gimp
Status: purge ok not-installed
Priority: optional
Section: graphics

Package: php5-tidy
Status: purge ok not-installed
Priority: optional
Section: web

Package: libpq4
Status: purge ok not-installed
Priority: optional
Section: libs

Package: icedove-gnome-support
Status: purge ok not-installed
Priority: optional
Section: mail

Package: libisccc0
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 144
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: powerpc
Source: bind9
Version: 1:9.2.4-1sarge2
Replaces: libbind0
Depends: libc6 (>= 2.3.2.ds1-21), libisc7
Conflicts: libbind0
Description: Command Channel Library used by BIND
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers the libisccc shared library used by BIND's daemons
 and clients, particularly rndc.

Package: modconf
Status: install ok installed
Priority: optional
Section: base
Installed-Size: 3720
Maintainer: Frank Lichtenheld <djpig@debian.org>
Version: 0.2.48
Depends: whiptail-provider | whiptail, modutils | module-init-tools
Conflicts: modutils (<< 2.1.85-14), module-init-tools (<< 3.1-pre2-1)
Description: Device Driver Configuration
 Modconf provides a terminal-based interface for installing and configuring
 device driver modules.

Package: coreutils
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 7800
Maintainer: Michael Stone <mstone@debian.org>
Version: 5.2.1-2
Replaces: textutils, shellutils, fileutils, stat, debianutils (<= 2.3.1)
Provides: textutils, shellutils, fileutils
Pre-Depends: libacl1 (>= 2.2.11-1), libc6 (>= 2.3.2.ds1-4)
Conflicts: stat
Description: The GNU core utilities
 This package contains the essential basic system utilities.
 .
 Specifically, this package includes:
 basename cat chgrp chmod chown chroot cksum comm cp csplit cut date dd df dir
 dircolors dirname du echo env expand expr factor false fmt fold groups head
 hostid id install join link ln logname ls md5sum mkdir mkfifo mknod mv nice nl
 nohup od paste pathchk pinky pr printenv printf ptx pwd readlink rm rmdir
 sha1sum seq shred sleep sort split stat stty sum sync tac tail tee test touch
 tr true tsort tty uname unexpand uniq unlink users vdir wc who whoami yes

Package: sudo
Status: install ok unpacked
Priority: optional
Section: admin
Installed-Size: 396
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: powerpc
Version: 1.6.8p7-1.4
Depends: libc6 (>= 2.3.2.ds1-21), libpam0g (>= 0.76), libpam-modules
Conffiles:
 /etc/init.d/sudo newconffile
 /etc/pam.d/sudo newconffile
Description: Provide limited super user privileges to specific users
 Sudo is a program designed to allow a sysadmin to give limited root
 privileges to users and log root activity.  The basic philosophy is to give
 as few privileges as possible but still allow people to get their work done.

Package: libfreetype6
Status: purge ok not-installed
Priority: optional
Section: libs

Package: debianutils
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 228
Maintainer: Clint Adams <schizo@debian.org>
Version: 2.8.4
Replaces: miscutils, cron (<= 3.0pl1-31), tetex-bin (<< 1.0.6-1.1), manpages-fr (<= 0.9.3-1)
Pre-Depends: libc6 (>= 2.3.2.ds1-4), coreutils (>= 4.5.8-1)
Conflicts: manpages-fr (<= 0.9.3-1)
Description: Miscellaneous utilities specific to Debian
 This package provides a number of small utilities which are used
 primarily by the installation scripts of Debian packages, although
 you may use them directly.
 .
 The specific utilities included are: installkernel mkboot mktemp
 run-parts savelog sensible-browser sensible-editor sensible-pager
 tempfile which.

Package: openoffice.org
Status: purge ok not-installed
Priority: optional
Section: editors

Package: php5-odbc
Status: purge ok not-installed
Priority: optional
Section: web

Package: samba
Status: install ok not-installed
Priority: optional
Section: net

Package: finger
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 80
Maintainer: Anibal Monsalve Salazar <A.Monsalve.Salazar@IEEE.org>
Source: bsd-finger
Version: 0.17-7
Replaces: netstd
Depends: libc6 (>= 2.3.2.ds1-4)
Description: user information lookup program
 finger displays information about the system users.

Package: linux-headers-2.6.18-4-prep
Status: purge ok not-installed
Priority: optional
Section: devel

Package: libdb1-compat
Status: install ok installed
Priority: required
Section: oldlibs
Installed-Size: 112
Maintainer: Colin Watson <cjwatson@debian.org>
Source: db1-compat
Version: 2.1.3-7
Replaces: libc6 (<< 2.2.5-13), libc6.1 (<< 2.2.5-13), libc0.3 (<< 2.2.5-13)
Depends: libc6 (>= 2.2.5-13)
Description: The Berkeley database routines [glibc 2.0/2.1 compatibility]
 libdb is a library for manipulating database files, developed at Berkeley.
 .
 It supports three kinds of file formats:
  * btree. A representation of a sorted, balanced tree structure.
  * hashed. An extensible, dynamic hashing scheme.
  * UNIX file oriented. A byte stream file with fixed or variable length
    records.
 .
 This library exists for compatibility with applications built against
 glibc 2.0 or 2.1. There is intentionally no corresponding development
 package. Do not link new applications against this library!

Package: libvlc0-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: gdb
Status: install ok installed
Priority: standard
Section: devel
Installed-Size: 10988
Maintainer: Daniel Jacobowitz <dan@debian.org>
Version: 6.3-6
Replaces: gdb-arm, insight (<< 6.1+cvs.2004.04.07-1)
Depends: libc6 (>= 2.3.2.ds1-21), libncurses5 (>= 5.4-1), libreadline4 (>= 4.3-1)
Conflicts: gdb-arm
Description: The GNU Debugger
 GDB is a source-level debugger, capable of breaking programs at
 any specific line, displaying variable values, and determining
 where errors occurred. Currently, it works for C, C++, Fortran
 Modula 2 and Java programs. A must-have for any serious
 programmer.

Package: menu
Status: purge ok not-installed
Priority: optional
Section: admin

Package: openoffice.org-l10n-fr
Status: purge ok not-installed
Priority: optional
Section: editors

Package: makedev
Status: install ok installed
Priority: required
Section: base
Installed-Size: 156
Maintainer: Bdale Garbee <bdale@gag.com>
Version: 2.3.1-77
Depends: base-passwd (>= 3.0.4)
Conflicts: udev (<= 0.024-7)
Conffiles:
 /etc/init.d/makedev c0f39eaa8fc5eec67b7ed860f787261b
Description: creates device files in /dev
 The MAKEDEV executable is used to create device files, often in /dev.
 .
 Device files are special files through which applications can interact
 with hardware.

Package: php4-snmp
Status: purge ok not-installed
Priority: optional
Section: web

Package: postgresql-7.4
Status: purge ok not-installed
Priority: optional
Section: misc

Package: openoffice.org-l10n-fa
Status: purge ok not-installed
Priority: optional
Section: editors

Package: mozilla-dev
Status: purge ok not-installed
Priority: optional
Section: devel

Package: openoffice.org-l10n-fi
Status: purge ok not-installed
Priority: optional
Section: editors

Package: telnet
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 192
Maintainer: Alberto Gonzalez Iniesta <agi@inittab.org>
Architecture: powerpc
Source: netkit-telnet
Version: 0.17-29
Replaces: netstd
Provides: telnet-client
Depends: netbase, libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.4.1-3), libncurses5 (>= 5.4-1), libstdc++5 (>= 1:3.3.4-1)
Description: The telnet client
 The telnet command is used for interactive communication with another host
 using the TELNET protocol.

Package: login
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 2084
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Source: shadow
Version: 1:4.0.3-31sarge9
Replaces: shadow-login, shadow-passwd, shellutils (<< 2.0-2), manpages-fr, manpages-hu, manpages-it, manpages-ko, manpages-ja, manpages-pl (<= 20020406-1)
Depends: libpam-modules (>= 0.72-5)
Pre-Depends: libc6 (>= 2.3.2.ds1-21), libpam0g (>= 0.76), libpam-runtime (>= 0.76-14)
Conflicts: shadow-login, pam-apps, secure-su, suidregister (<< 0.50)
Conffiles:
 /etc/pam.d/login cc6956cac9589888f82019ff59da815c
 /etc/pam.d/su b40e581d3eb12ffbd0a260710934093f
 /etc/login.defs c41e6723e9d2f124409d48928cc01d69
 /etc/securetty 03bcd882759f7b474cec241d90e791ef
Description: system login tools
 These tools are required to be able to login and use your system. The
 login program invokes your user shell and enables command execution. The
 newgrp program is used to change your effective group ID (useful for
 workgroup type situations). The su program allows changing your effective
 user ID (useful being able to execute commands as another user).

Package: clamav-dbg
Status: purge ok not-installed
Priority: extra
Section: utils

Package: ssh
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 1740
Maintainer: Matthew Vernon <matthew@debian.org>
Architecture: powerpc
Source: openssh
Version: 1:3.8.1p1-8.sarge.6
Provides: rsh-client
Depends: libc6 (>= 2.3.2.ds1-21), libpam0g (>= 0.76), libssl0.9.7, libwrap0, zlib1g (>= 1:1.2.1), debconf (>= 1.2.0), libpam-runtime (>= 0.76-14), libpam-modules (>= 0.72-9), adduser (>= 3.9), dpkg (>= 1.9.0)
Suggests: ssh-askpass, xbase-clients
Conflicts: ssh-nonfree (<< 2), ssh-socks, ssh2, sftp, rsh-client (<< 0.16.1-1)
Conffiles:
 /etc/ssh/ssh_config b4daec7526aab853f464b6a62cd01537
 /etc/ssh/moduli 085771ebb2b6cfe60b84ad094de0788a
 /etc/init.d/ssh 60c7f78120c01b393255eb7619886d96
 /etc/pam.d/ssh c127580e21f78d8dc24091b9f3ccd736
 /etc/default/ssh a7ff8802959335d8de91e09c16f36deb
Description: Secure rlogin/rsh/rcp replacement (OpenSSH)
 This is the portable version of OpenSSH, a free implementation of
 the Secure Shell protocol as specified by the IETF secsh working
 group.
 .
 Ssh (Secure Shell) is a program for logging into a remote machine
 and for executing commands on a remote machine.
 It provides secure encrypted communications between two untrusted
 hosts over an insecure network.  X11 connections and arbitrary TCP/IP
 ports can also be forwarded over the secure channel.
 It is intended as a replacement for rlogin, rsh and rcp, and can be
 used to provide applications with a secure communication channel.
 .
 This package provides both the ssh client and the sshd server.
 .
 --------------------------------------------------------------------
 .
 In some countries it may be illegal to use any encryption at all
 without a special permit.

Package: openoffice.org-l10n-as-in
Status: purge ok not-installed
Priority: optional
Section: editors

Package: gettext-base
Status: install ok installed
Priority: standard
Section: base
Installed-Size: 860
Maintainer: Santiago Vila <sanvila@debian.org>
Source: gettext
Version: 0.14.4-2
Replaces: gettext (<= 0.12.1-1)
Provides: libasprintf0
Depends: libc6 (>= 2.3.2.ds1-21)
Description: GNU Internationalization utilities for the base system
 This package includes the gettext and ngettext programs which allow
 other packages to internationalize the messages given by shell scripts.

Package: man-db
Status: install ok installed
Priority: important
Section: doc
Installed-Size: 1460
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: powerpc
Version: 2.4.2-21sarge1
Replaces: man, nlsutils
Provides: man, man-browser
Depends: groff-base (>= 1.17.2-2), bsdmainutils, debconf (>= 1.2.0), dpkg (>= 1.9.0), libc6 (>= 2.3.2.ds1-21), libgdbm3
Suggests: groff, less
Conflicts: man, suidmanager (<< 0.50)
Conffiles:
 /etc/manpath.config 9a763dd484177dfd43d507779da9af43
 /etc/cron.daily/man-db db97bccd59bef2bc0553d7d3f7276e82
 /etc/cron.weekly/man-db a29a37954550c9ba0d85152aebc3c592
Description: The on-line manual pager
 This package provides the man command, the primary way of examining the
 on-line help files (manual pages). Other utilities provided include the
 whatis and apropos commands for searching the manual page database, the
 manpath utility for determining the manual page search path, and the
 maintenance utilities mandb, catman and zsoelim. man-db uses the groff
 suite of programs to format and display the manual pages.

Package: openoffice.org-l10n-ru
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-l10n-rw
Status: purge ok not-installed
Priority: optional
Section: editors

Package: squirrelmail
Status: purge ok not-installed
Priority: optional
Section: web

Package: openoffice.org-evolution
Status: purge ok not-installed
Priority: optional
Section: gnome

Package: libgdbm3
Status: install ok installed
Priority: standard
Section: base
Installed-Size: 88
Maintainer: James Troup <james@nocrew.org>
Architecture: powerpc
Source: gdbm
Version: 1.8.3-2
Depends: libc6 (>= 2.3.2-1)
Description: GNU dbm database routines (runtime version)
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 The basic use of 'gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the 'dictionary' Abstract Data Type
 ('hash' to perl programmers).

Package: libexif12
Status: purge ok not-installed
Priority: optional
Section: libs

Package: sharutils
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 392
Maintainer: Santiago Vila <sanvila@debian.org>
Version: 1:4.2.1-13
Depends: libc6 (>= 2.3.2.ds1-4), debianutils (>= 1.6)
Conflicts: shar, uuencode
Description: shar, unshar, uuencode, uudecode
 `shar' makes so-called shell archives out of many files, preparing
 them for transmission by electronic mail services.  `unshar' helps
 unpacking shell archives after reception.  Other related utility
 programs help with other tasks.
 .
 `uuencode' prepares a file for transmission over an electronic
 channel which ignores or otherwise mangles the eight bit (high
 order bit) of bytes.  `uudecode' does the converse transformation.

Package: libgcrypt11
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 400
Maintainer: Matthias Urlichs <smurf@debian.org>
Architecture: powerpc
Version: 1.2.0-11.1
Depends: libc6 (>= 2.3.2.ds1-21), libgpg-error0 (>= 1.0)
Description: LGPL Crypto library - runtime library
 libgcrypt contains cryptographic functions.  Most important free
 ciphers have been implemented: arcfour, blowfish, cast5, des,
 3DES, elgamal, rijndael, RSA, twofish; as well as hash algorithms:
 DSA, MD5, RMD160, SHA1, tiger.

Package: openoffice.org-l10n-hu
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-l10n-hr
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-l10n-he
Status: purge ok not-installed
Priority: optional
Section: editors

Package: lighttpd-mod-trigger-b4-dl
Status: purge ok not-installed
Priority: optional
Section: web

Package: openoffice.org-l10n-hi
Status: purge ok not-installed
Priority: optional
Section: editors

Package: vlc-plugin-ggi
Status: purge ok not-installed
Priority: optional
Section: graphics

Package: libphp-phpmailer
Status: purge ok not-installed
Priority: optional
Section: web

Package: slang1
Status: install ok installed
Priority: required
Section: base
Installed-Size: 620
Maintainer: Jim Mintha <jmintha@debian.org>
Source: slang
Version: 1.4.9dbs-8
Depends: libc6 (>= 2.3.2.ds1-4)
Description: The S-Lang programming library - runtime version
 S-Lang is a C programmer's library that includes routines for the rapid
 development of sophisticated, user friendly, multi-platform applications.
 .
 This package contains only the shared library libslang.so.* and copyright
 information. It is only necessary for programs that use this library (such
 as jed and slrn). If you plan on doing development with S-Lang, you will
 need the companion -dev package as well.

Package: biff
Status: install ok installed
Priority: standard
Section: mail
Installed-Size: 96
Maintainer: Dave Holland <dave@debian.org>
Version: 1:0.17.pre20000412-1.3
Depends: libc6 (>= 2.3.1-1)
Description: a mail notification tool
 biff is a small program that prints a message to your terminal
 when new email arrives. Actually, the message is printed by
 the comsat daemon, and biff just enables/disables the u+x
 permission flag for the terminal, which comsat uses to determine
 whether or not to write to your terminal.
 .
 biff is mainly of historic interest, since there are much better
 alternatives (xbiff, gbiff) that are network-aware and do not
 require a daemon. Although there are no known security problems,
 running additional services is often considered risky.
 .
 By default, the biff service is disabled. To use biff email
 notification, you must enable this service by running 'update-inetd
 --enable biff' after the package is installed. You may also need
 to modify the configuration of your mail transport agent to enable
 comsat notification.

Package: evolution-data-server-common
Status: purge ok not-installed
Priority: optional
Section: gnome

Package: php4-recode
Status: purge ok not-installed
Priority: optional
Section: web

Package: libuuid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 112
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: powerpc
Source: e2fsprogs
Version: 1.37-2sarge1
Replaces: e2fsprogs (<< 1.34-1)
Depends: libc6 (>= 2.3.2.ds1-21)
Description: universally unique id library
 libuuid generates and parses 128-bit universally unique id's (UUID's),
 using a standard which is blessed by both Microsoft and DCE, and is
 being proposed as an internet standard.  See the internet-draft:
 .
                draft-leach-uuids-guids-01.txt
 .
 for more information.

Package: php4-pspell
Status: purge ok not-installed
Priority: optional
Section: web

Package: lwresd
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 408
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: powerpc
Source: bind9
Version: 1:9.2.4-1sarge2
Depends: libc6 (>= 2.3.2.ds1-21), libdns16, libisc7, libisccc0, libisccfg0, liblwres1, libssl0.9.7
Recommends: libnss-lwres
Conffiles:
 /etc/init.d/lwresd 9c052a3d861475eb7caa606e16a0abf5
Description: Lightweight Resolver Daemon
 lwresd is the daemon providing name lookup services to clients that use
 the BIND 9 lightweight resolver library.  It is essentially a stripped-
 down, caching-only name server that answers queries using the BIND 9
 lightweight resolver protocol rather than the DNS protocol.

Package: mozilla-dom-inspector
Status: purge ok not-installed
Priority: optional
Section: web

Package: openoffice.org-l10n-pt-br
Status: purge ok not-installed
Priority: optional
Section: editors

Package: libedata-cal1.2-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: mac-fdisk
Status: install ok installed
Priority: required
Section: base
Installed-Size: 92
Maintainer: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de>
Version: 0.1-11
Depends: libc6 (>= 2.3.2.ds1-4)
Description: Apple disk partition manipulation tool
 The fdisk utilities from the MkLinux project, adopted for Linux/m68k.
 Mac-fdisk allows you to create and edit the partition table of a disk.
 It supports only the Apple partition format used on Macintosh and PowerMac,
 use pmac-fdisk for PC partition format disks as used on PowerPC machines.
 Mac-fdisk is an interactive tool with a menu similar to PC fdisk, supported
 options are somewhat different from PC fdisk due to the differences in
 partition format.

Package: libtasn1-2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 164
Maintainer: Matthias Urlichs <smurf@debian.org>
Architecture: powerpc
Version: 0.2.10-3sarge1
Depends: libc6 (>= 2.3.2.ds1-21)
Conflicts: libgnutls5 (<< 0.5.1-4), libtasn1-1
Description: Manage ASN.1 structures (runtime)
 Manage ASN1 (Abstract Syntax Notation One) structures.
 The main features of this library are:
   * on-line ASN1 structure management that doesn't require any C code
     file generation.
   * off-line ASN1 structure management with C code file generation
     containing an array.
   * DER (Distinguish Encoding Rules) encoding
   * no limits for INTEGER and ENUMERATED values
 .
 This package contains runtime libraries.

Package: libcurl3-gnutls
Status: purge ok not-installed
Priority: optional
Section: libs

Package: openoffice.org-help-ja
Status: purge ok not-installed
Priority: optional
Section: doc

Package: openoffice.org-help-en-us
Status: purge ok not-installed
Priority: optional
Section: doc

Package: openoffice.org-help-pt-br
Status: purge ok not-installed
Priority: optional
Section: doc

Package: openoffice.org-gnome
Status: purge ok not-installed
Priority: optional
Section: gnome

Package: libqt4-gui
Status: purge ok not-installed
Priority: optional
Section: libs

Package: procps
Status: install ok installed
Priority: required
Section: base
Installed-Size: 588
Maintainer: Craig Small <csmall@debian.org>
Version: 1:3.2.1-2
Replaces: watch, bsdutils (<< 2.9x-1)
Provides: watch
Depends: libc6 (>= 2.3.2.ds1-4), libncurses5 (>= 5.4-1)
Recommends: psmisc
Conflicts: watch, libproc-dev (<< 1:1.2.6-2), w-bassman (<< 1.0-3), procps-nonfree, pgrep (<< 3.3-5)
Conffiles:
 /etc/sysctl.conf c629d55f0a9e2ba8e4d711e6aee5eae4
 /etc/init.d/procps.sh f95210c57b82b303473d127a6658d0dd
Description: The /proc file system utilities
 These are utilities to browse the /proc filesystem, which is not a real file
 system but a way for the kernel to provide information about the status of
 entries in its process table. (e.g. running, stopped or "zombie")
 Both command line and full screen utilities are provided. Ncurses is needed
 for the full screen utilities.  More information can be found at procps
 website http://procps.sf.net/

Package: krb5-ftpd
Status: purge ok not-installed
Priority: extra
Section: net

Package: linux-headers-2.6.18-4-powerpc
Status: purge ok not-installed
Priority: optional
Section: devel

Package: php4-xslt
Status: purge ok not-installed
Priority: optional
Section: web

Package: linux-headers-2.6.18-4-vserver-powerpc
Status: purge ok not-installed
Priority: optional
Section: devel

Package: mozilla-thunderbird-inspector
Status: purge ok not-installed
Priority: optional
Section: mail

Package: libnspr4-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: gcc-3.3
Status: install ok installed
Priority: standard
Section: devel
Installed-Size: 4748
Maintainer: Debian GCC maintainers <debian-gcc@lists.debian.org>
Architecture: powerpc
Version: 1:3.3.5-13
Provides: c-compiler
Depends: gcc-3.3-base (>= 1:3.3.5-13), libgcc1 (>= 1:3.3.4-3), libc6 (>= 2.3.2.ds1-21), cpp-3.3 (>= 1:3.3.5-13), cpp-3.3 (<< 1:3.3.6), binutils (>= 2.15-5)
Recommends: libc6-dev (>= 2.3.2.ds1-16)
Suggests: gcc-3.3-doc (>= 1:3.3.5-13)
Conflicts: gcc-3.2 (<= 1:3.2.3-0pre8)
Description: The GNU C compiler
 This is the GNU C compiler, a fairly portable optimizing compiler for C.

Package: php5-pgsql
Status: purge ok not-installed
Priority: optional
Section: web

Package: console-tools
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 1012
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Version: 1:0.2.3dbs-56
Replaces: open, util-linux (<< 2.11)
Provides: console-utilities, open
Depends: libc6 (>= 2.3.2.ds1-4), libconsole (= 1:0.2.3dbs-56), sysvinit (>> 2.74), console-common, debconf (>= 0.5)
Recommends: console-data (>= 2002.12.04dbs-1)
Suggests: kbd-compat
Conflicts: console-utilities, kbd (<< 0.95-11), open, console-common (<< 0.7.25)
Conffiles:
 /etc/console-tools/config 8e9698871216dfe5b7b6aa15a16b1ffb
 /etc/console-tools/remap 2f1f15d62b45ab43c04b3ddbfcf591ec
 /etc/init.d/console-screen.sh 583b3bfbd5cdb7e33c5b6a372de665ce
Description: Linux console and font utilities
 This package allows you to set-up and manipulate the Linux console (ie.
 screen and keyboard), and manipulate console-font files.
 .
 `console-tools' was developed from version 0.94 of the standard `kbd'
 package, and integrates many fixes and enhancements, including new
 kbd features up to 0.99.
 .
 You will probably want to install a set of data files, such as the one
 in the `console-data' package.
 .
 For command-line compatibility with kbd, you may want to install the
 kbd-compat package.

Package: rrlogind
Status: purge ok not-installed
Priority: optional
Section: net

Package: ncurses-base
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 292
Maintainer: Daniel Jacobowitz <ncurses-maint@debian.org>
Source: ncurses
Version: 5.4-4
Replaces: ncurses-term
Provides: ncurses-runtime
Conflicts: ncurses, ncurses-runtime
Conffiles:
 /etc/terminfo/E/Eterm 77e9bfd2b9f650442290d67b67437d39
 /etc/terminfo/E/Eterm-color 77e9bfd2b9f650442290d67b67437d39
 /etc/terminfo/a/ansi 6b60f35a7fb6122a53b1e74e56cba56e
 /etc/terminfo/c/cons25 9b34842b3ce68eb7ebf904ecd757c655
 /etc/terminfo/c/cygwin d681596ecd9043b041653ba573a76c3e
 /etc/terminfo/d/dumb ca3b114f0727da81a9b957b553a9915d
 /etc/terminfo/h/hurd f3f4945bace312609517de8dea98357a
 /etc/terminfo/l/linux 8760f812a1d023792bbaa52d4ee913ce
 /etc/terminfo/m/mach d982b12970acbb48d594ed799615f036
 /etc/terminfo/m/mach-bold 21465595967257ad4020192c005cb280
 /etc/terminfo/m/mach-color 1bb86008400135036fea5773a9c819a1
 /etc/terminfo/p/pcansi 8b97f1ea94e8d2942c8dcd2d943e1322
 /etc/terminfo/r/rxvt bced284b61d1dbc0a8277bd7935dd511
 /etc/terminfo/r/rxvt-basic 1eb7a931b067c96963846e2a4ef2d020
 /etc/terminfo/r/rxvt-m 1eb7a931b067c96963846e2a4ef2d020
 /etc/terminfo/s/screen 0d5a720e9ec24b5adae01d0725268714
 /etc/terminfo/s/screen-bce fcd86fb14bb8862d0228ebcc5130d932
 /etc/terminfo/s/screen-s 9c7c28dcb51cb6a756012fea6ecbc508
 /etc/terminfo/s/screen-w bc8763ccb5b05b4b28363d58fcbf4e72
 /etc/terminfo/s/sun c7ab8d7ab013eca15c6eb83a4c80a3d1
 /etc/terminfo/v/vt100 d93624290a5975897b0478520c709e83
 /etc/terminfo/v/vt102 e6fdc8a4110be9e38b4f1bb50009e883
 /etc/terminfo/v/vt220 d84067478b4b1365bec5b152daaf9161
 /etc/terminfo/v/vt52 2cfdf4dcc4a93c378d9c6bc01cb8f3c3
 /etc/terminfo/w/wsvt25 5c864b0e8e94e9749f2870116518b9df
 /etc/terminfo/w/wsvt25m 068fa9d5fa86261f444ded5dd1dea7ec
 /etc/terminfo/x/xterm a27bce1c0ad7de297b3fd0fad07ee3b6
 /etc/terminfo/x/xterm-debian 78e967e4963143e07e9f2bebdd3fcbae
 /etc/terminfo/x/xterm-r5 fe7a8a99ac6e35a367fd06a54058552f
 /etc/terminfo/x/xterm-r6 c527220621b07a8d87be6f33ec0a792e
 /etc/terminfo/x/xterm-xfree86 4e917eab4bae83fc609831bb83d71964
 /etc/terminfo/x/xterm-mono 033259cba48e6fb8fc34dea3ebfa2b5e
 /etc/terminfo/x/xterm-vt220 186abe4837963b51a89188180566a66d
 /etc/terminfo/x/xterm-color 98ec756da66f5f3f0a46bea0ae8d2641
Description: Descriptions of common terminal types
 This package contains what should be a reasonable subset of terminal
 definitions, including: ansi, dumb, linux, rxvt, screen, sun, vt100,
 vt102, vt220, vt52, and xterm.

Package: postgresql-pltcl-7.4
Status: purge ok not-installed
Priority: optional
Section: misc

Package: libpopt0
Status: install ok installed
Priority: important
Section: base
Installed-Size: 444
Maintainer: Paul Martin <pm@debian.org>
Source: popt
Version: 1.7-5
Replaces: popt
Depends: libc6 (>= 2.3.2.ds1-4)
Conflicts: popt, libpopt-dev (<= 1.4-1), rpm (<= 4.0.2-3)
Description: lib for parsing cmdline parameters
 Popt was heavily influenced by the getopt() and getopt_long() functions,
 but it allows more powerful argument expansion. It can parse arbitrary
 argv[] style arrays and automatically set variables based on command
 line arguments. It also allows command line arguments to be aliased via
 configuration files and includes utility functions for parsing arbitrary
 strings into argv[] arrays using shell-like rules.
 .
 This package contains the runtime library and locale data.

Package: libpam0g
Status: install ok installed
Priority: required
Section: base
Installed-Size: 184
Maintainer: Sam Hartman <hartmans@debian.org>
Source: pam
Version: 0.76-22
Replaces: libpam0g-util
Depends: libc6 (>= 2.3.2.ds1-4), libpam-runtime
Suggests: libpam-doc
Conflicts: libpam0 (<= 0.56-2), libpam
Description: Pluggable Authentication Modules library
 Contains the C shared library for Linux-PAM, a suite of shared
 libraries that enable the local system administrator to choose how
 applications authenticate users.  In other words, without rewriting
 or recompiling a PAM-aware application, it is possible to switch
 between the authentication mechanism(s) it uses.  One may entirely
 upgrade the local authentication system without touching the
 applications themselves.

Package: libmagic-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: libstdc++2.10-dev
Status: purge ok not-installed
Priority: standard
Section: devel

Package: libexif-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: libusb-0.1-4
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 108
Maintainer: Aurelien Jarno <aurel32@debian.org>
Architecture: powerpc
Source: libusb
Version: 2:0.1.10a-9.sarge.1
Replaces: libusb0
Depends: libc6 (>= 2.3.2.ds1-21), debconf (>= 0.5) | debconf-2.0
Recommends: hotplug
Conflicts: libusb0, libccid (<< 0.9.2-3)
Description: userspace USB programming library
 Library for programming USB applications without the knowledge
 of Linux kernel internals.
 .
 More information can be found at the Linux USB web site
 http://www.linux-usb.org/ .

Package: libgpg-error0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 124
Maintainer: Jose Carlos Garcia Sogo <jsogo@debian.org>
Architecture: powerpc
Source: libgpg-error
Version: 1.0-1
Depends: libc6 (>= 2.3.2.ds1-4)
Description: library for common error values and messages in GnuPG components
 Library that defines common error values for all GnuPG
 components.  Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
 pinentry, SmartCard Daemon and possibly more in the future.

Package: psmisc
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 264
Maintainer: Craig Small <csmall@debian.org>
Version: 21.5-1
Replaces: procps (<< 1:1.2)
Depends: libc6 (>= 2.3.2.ds1-4), libncurses5 (>= 5.4-1)
Description: Utilities that use the proc filesystem
 This package contains three little utilities that use the proc FS:
 .
 `fuser' identifies processes using files (similar to Sun's or SGI's fuser).
 `killall' kills processes by name, e.g. killall -HUP named. `pstree' shows
 the currently running processes as a tree

Package: libmozjs-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: krb5-admin-server
Status: purge ok not-installed
Priority: optional
Section: net

Package: samba-doc
Status: purge ok not-installed
Priority: optional
Section: doc

Package: dovecot-common
Status: purge ok not-installed
Priority: optional
Section: mail

Package: perl-modules
Status: install ok installed
Priority: standard
Section: interpreters
Installed-Size: 10348
Maintainer: Brendan O'Dea <bod@debian.org>
Architecture: all
Source: perl
Version: 5.8.4-8sarge5
Replaces: libpod-parser-perl, libansicolor-perl, libfile-temp-perl, libnet-perl, libattribute-handlers-perl, libcgi-pm-perl, libi18n-langtags-perl, liblocale-maketext-perl, libmath-bigint-perl, libnet-ping-perl, libtest-harness-perl, libtest-simple-perl, liblocale-codes-perl
Provides: libpod-parser-perl, libansicolor-perl, libfile-temp-perl, libnet-perl, libattribute-handlers-perl, libcgi-pm-perl, libi18n-langtags-perl, liblocale-maketext-perl, libmath-bigint-perl, libnet-ping-perl, libtest-harness-perl, libtest-simple-perl, liblocale-codes-perl
Depends: perl (>= 5.8.4-1)
Conflicts: libpod-parser-perl (<< 1.14-1), libansicolor-perl (<< 1.08-1), libfile-temp-perl (<< 0.14-1), libnet-perl (<< 1:1.17-1), libattribute-handlers-perl (<< 0.78-1), libcgi-pm-perl (<< 3.04-1), libi18n-langtags-perl (<< 0.29-1), liblocale-maketext-perl (<< 1.08-1), libmath-bigint-perl (<< 1.70-1), libnet-ping-perl (<< 2.31-1), libtest-harness-perl (<< 2.40-1), libtest-simple-perl (<< 0.47-1), liblocale-codes-perl (<< 2.06.1-1)
Description: Core Perl modules
 Architecture independent Perl modules.  These modules are part of Perl and
 required if the `perl' package is installed.

Package: bsdutils
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 172
Maintainer: LaMont Jones <lamont@debian.org>
Source: util-linux (2.12p-4sarge1)
Version: 1:2.12p-4sarge1
Pre-Depends: libc6 (>= 2.3.2.ds1-21)
Recommends: bsdmainutils
Description: Basic utilities from 4.4BSD-Lite
 This package contains the bare minimum number of BSD utilities needed
 to boot a Debian system.  You should probably also install
 bsdmainutils to get the remaining standard BSD utilities.
 .
 Included are: logger, renice, replay, script, wall

Package: wireshark
Status: purge ok not-installed
Priority: optional
Section: net

Package: gforge-plugin-scmcvs
Status: purge ok not-installed
Priority: optional
Section: devel

Package: postgresql-plpython-8.1
Status: purge ok not-installed
Priority: optional
Section: misc

Package: libgimp2.0-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: ipmasqadm
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 120
Maintainer: Anthony Towns <ajt@debian.org>
Version: 0.4.2-2
Replaces: netbase (<< 4.00)
Depends: libc6 (>= 2.2.1-2)
Description: Utility for configuring extra masquerading functionality
 Ipmasqadm is used to configure extra masquerading funcionality, usually
 provided by additional kernel modules.

Package: libecal1.2-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: libident
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 84
Maintainer: Paul Slootman <paul@debian.org>
Version: 0.22-3
Depends: libc6 (>= 2.3.2.ds1-4)
Suggests: libident-dev
Description: simple RFC1413 client library - runtime
 This is a small library to interface to the Ident protocol server;
 "ident" enables a remote host to find out who's the owner of a
 network connection.
 .
 /usr/sbin/in.identtestd is a small daemon (to be started from inetd)
 that does an ident lookup on you if you telnet into it. Can be used
 to verify that your Ident server is working correctly.

Package: mozilla-chatzilla
Status: purge ok not-installed
Priority: optional
Section: net

Package: gcc-2.95
Status: purge ok not-installed
Priority: standard
Section: devel

Package: vlc-plugin-esd
Status: purge ok not-installed
Priority: optional
Section: graphics

Package: libcurl3-gnutls-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: qemu
Status: purge ok not-installed
Priority: optional
Section: misc

Package: openoffice.org-l10n-or-in
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-l10n-uk
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-qa-api-tests
Status: purge ok not-installed
Priority: extra
Section: devel

Package: postgresql-server-dev-8.1
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: openoffice.org-gtk-gnome
Status: purge ok not-installed
Priority: optional
Section: gnome

Package: php4-pgsql
Status: purge ok not-installed
Priority: optional
Section: web

Package: libestraier-java
Status: purge ok not-installed
Priority: optional
Section: libs

Package: openoffice.org-l10n-cy
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-l10n-cs
Status: purge ok not-installed
Priority: optional
Section: editors

Package: postgresql-plperl-8.1
Status: purge ok not-installed
Priority: optional
Section: misc

Package: dpkg-dev
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 548
Maintainer: Dpkg Development <debian-dpkg@lists.debian.org>
Source: dpkg
Version: 1.10.28
Replaces: dpkgname, dpkg (<< 1.4.1.8), dpkg-doc-ja
Depends: perl5, perl-modules, cpio (>= 2.4.2-2), patch (>= 2.2-1), make, binutils
Recommends: c-compiler
Suggests: gnupg, debian-keyring
Conflicts: dpkgname
Conffiles:
 /etc/dpkg/shlibs.default a045abfdbc336e4523424e73f4fa40d0
 /etc/dpkg/shlibs.override 10f58a7d103a09feeaee1b3dcffeca8c
Description: Package building tools for Debian
 This package contains the tools (including dpkg-source) required to
 unpack, build and upload Debian source packages.
 .
 Most Debian source packages will require additional tools to build -
 for example, most packages need the `make' and the C compiler `gcc'.

Package: openoffice.org-l10n-ca
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-l10n-pa-in
Status: purge ok not-installed
Priority: optional
Section: editors

Package: libc6-dev
Status: install ok installed
Priority: standard
Section: devel
Installed-Size: 9384
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Source: glibc
Version: 2.3.2.ds1-22sarge6
Replaces: man-db (<= 2.3.10-41), gettext (<= 0.10.26-1), ppp (<= 2.2.0f-24), libgdbmg1-dev (<= 1.7.3-24), ldso (<= 1.9.11-9), netkit-rpc, netbase (<< 4.0), kerberos4kth-dev (<< 1.2.2-10)
Provides: libc-dev
Depends: libc6 (= 2.3.2.ds1-22sarge6), linux-kernel-headers
Recommends: gcc | c-compiler
Suggests: glibc-doc, manpages-dev
Conflicts: libstdc++2.10-dev (<< 1:2.95.2-15), gcc-2.95 (<< 1:2.95.3-8), libc6-dev (<< 2.0.110-1), locales (<< 2.1.3-5), libstdc++2.9 (<< 2.91.58-2.1), libstdc++2.8 (<< 2.90.29-1), netkit-rpc, libc-dev
Description: GNU C Library: Development Libraries and Header Files
 Contains the symlinks, headers, and object files needed to compile
 and link programs which use the standard C library.

Package: libssl0.9.7
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1680
Maintainer: Christoph Martin <christoph.martin@uni-mainz.de>
Source: openssl
Version: 0.9.7e-3sarge4
Depends: libc6 (>= 2.3.2.ds1-21), debconf (>= 0.5) | debconf-2.0
Conflicts: ssleay (<< 0.9.2b), libssl, openssl (<< 0.9.6-2), libssl096-dev (<< 0.9.6-2)
Description: SSL shared libraries
 libssl and libcrypto shared libraries needed by programs like
 apache-ssl, telnet-ssl and openssh.
 .
 It is part of the OpenSSL implementation of SSL.

Package: nfs-common
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 224
Maintainer: Chip Salzenberg <chip@debian.org>
Source: nfs-utils
Version: 1:1.0.6-3.1
Replaces: nfs-client
Provides: nfs-client
Depends: portmap, debconf (>= 1.0), sysvinit (>= 2.80-1), libc6 (>= 2.3.2.ds1-4), libwrap0
Conflicts: nfs-client
Conffiles:
 /etc/default/nfs-common 9409842759091e981d65a210e3e914cb
 /etc/init.d/nfs-common 1a943afbda0736e4f19aa2a4ba88516a
Description: NFS support files common to client and server
 Use this package on any machine that does NFS either as client or
 server.  Programs included: lockd, statd, showmount, and nfsstat.
 .
 Upstream: SourceForge project "nfs", CVS module nfs-utils.

Package: libssl0.9.6
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1192
Maintainer: Christoph Martin <christoph.martin@uni-mainz.de>
Source: openssl096
Version: 0.9.6m-1sarge4
Replaces: libssl, libssl096
Provides: libssl096
Depends: libc6 (>= 2.3.2.ds1-21)
Conflicts: ssleay (<< 0.9.2b), libssl, openssl (<< 0.9.6-2), libssl096, libssl096-dev (<< 0.9.6-2)
Description: SSL shared libraries (old version)
 libssl and libcrypto shared libraries needed by programs like
 apache-ssl, telnet-ssl and openssh.
 .
 It is part of the OpenSSL implementation of SSL.

Package: linux-image-2.6.18-4-powerpc
Status: purge ok not-installed
Priority: optional
Section: admin

Package: console-tools-libs
Status: purge ok not-installed
Priority: important
Section: libs

Package: centericq-common
Status: purge ok not-installed
Priority: optional
Section: net

Package: openoffice.org-l10n-ta-in
Status: purge ok not-installed
Priority: optional
Section: editors

Package: libqt4-sql
Status: purge ok not-installed
Priority: optional
Section: libs

Package: broffice.org
Status: purge ok not-installed
Priority: extra
Section: editors

Package: openoffice.org-gcj
Status: purge ok not-installed
Priority: optional
Section: libs

Package: console-common
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 680
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Version: 0.7.49
Replaces: console-tools (<< 1:0.2.3-18), kbd (<< 0.99-12), console-data (<< 1999.08.29-18)
Depends: debianutils (>= 1.13), console-data, console-tools (>= 1:0.2.3dbs-54) | kbd
Pre-Depends: debconf (>= 0.5)
Recommends: console-utilities
Conflicts: console-data (<< 1999.08.29-20)
Conffiles:
 /etc/init.d/keymap.sh b05e031e29bf5a3d392d36927fc927d6
Description: Basic infrastructure for text console configuration
 This package contains the install-keymap(8) utility, which is the
 official way to specify a boot-time keymap to the system, as well
 as tools for internal use of keymap-providing packages.

Package: dia-common
Status: purge ok not-installed
Priority: optional
Section: graphics

Package: ncurses-bin
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 488
Maintainer: Daniel Jacobowitz <ncurses-maint@debian.org>
Source: ncurses
Version: 5.4-4
Provides: tput
Pre-Depends: libc6 (>= 2.3.2.ds1-4), libncurses5 (>= 5.4-1)
Conflicts: ncurses, tput
Description: Terminal-related programs and man pages
 This package contains the programs used for manipulating the terminfo
 database and individual terminfo entries, as well as some programs for
 resetting terminals and such.

Package: perl-base
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 2264
Maintainer: Brendan O'Dea <bod@debian.org>
Architecture: powerpc
Source: perl
Version: 5.8.4-8sarge5
Replaces: perl-5.005-base (<< 6), perl-5.6-base (<< 6), perl (<< 5.8.0-9), perl-modules (<< 5.8.4-5), libperl5.8 (<< 5.8.0-20), libscalar-list-utils-perl, libclass-multimethods-perl (<< 1.70-4)
Provides: perl5-base, perlapi-5.8.0, perlapi-5.8.1, perlapi-5.8.2, perlapi-5.8.3, perlapi-5.8.4, data-dumper, libscalar-list-utils-perl
Pre-Depends: libc6 (>= 2.3.2.ds1-21)
Suggests: perl
Conflicts: perl-5.004-base (<< 6), perl-5.005-base (<< 6), perl-5.6-base (<< 6), data-dumper, autoconf2.13 (<< 2.13-45), libscalar-list-utils-perl (<< 1:1.13-1)
Description: The Pathologically Eclectic Rubbish Lister
 A scripting language with delusions of full language-hood, Perl is used
 in many system scripts and utilities.
 .
 This is a stripped down Perl with only essential libraries.  To make
 full use of Perl, you'll want to install the `perl', `perl-modules' and
 optionally `perl-doc' packages which supplement this one.

Package: openoffice.org-java-common
Status: purge ok not-installed
Priority: optional
Section: editors

Package: sysv-rc
Status: install ok installed
Priority: required
Section: base
Installed-Size: 192
Maintainer: Miquel van Smoorenburg <miquels@cistron.nl>
Architecture: all
Source: sysvinit
Version: 2.86.ds1-1
Replaces: dpkg (<< 1.9.17), sysvinit (<< 2.85-1), file-rc (>> 0.7.0)
Suggests: sysv-rc-conf
Conflicts: file-rc
Description: Standard boot mechanism using symlinks in /etc/rc?.d
 This package provides support for the System-V like system of booting,
 shutting down and changing runlevels configured through symbolic
 links in the /etc/rc?.d directories.

Package: cpp-3.3
Status: install ok installed
Priority: standard
Section: interpreters
Installed-Size: 3496
Maintainer: Debian GCC maintainers <debian-gcc@lists.debian.org>
Architecture: powerpc
Source: gcc-3.3
Version: 1:3.3.5-13
Depends: gcc-3.3-base (>= 1:3.3.5-13), gcc-3.3-base (<< 1:3.3.6), libc6 (>= 2.3.2.ds1-21)
Description: The GNU C preprocessor
 A macro processor that is used automatically by the GNU C compiler
 to transform programs before actual compilation.
 .
 This package has been separated from gcc for the benefit of those who
 require the preprocessor but not the compiler.

Package: php5-dev
Status: purge ok not-installed
Priority: optional
Section: devel

Package: apt
Status: install ok installed
Priority: important
Section: base
Installed-Size: 3740
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: powerpc
Version: 0.5.28.6
Replaces: libapt-pkg-doc (<< 0.3.7), libapt-pkg-dev (<< 0.3.7)
Provides: libapt-pkg-libc6.3-5-3.3
Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.4.1-3), libstdc++5 (>= 1:3.3.4-1)
Suggests: aptitude | synaptic | gnome-apt | wajig, dpkg-dev, apt-doc
Description: Advanced front-end for dpkg
 This is Debian's next generation front-end for the dpkg package manager.
 It provides the apt-get utility and APT dselect method that provides a
 simpler, safer way to install and upgrade packages.
 .
 APT features complete installation ordering, multiple source capability
 and several other unique features, see the Users Guide in apt-doc.

Package: openoffice.org-help-es
Status: purge ok not-installed
Priority: optional
Section: doc

Package: openoffice.org-help-et
Status: purge ok not-installed
Priority: optional
Section: doc

Package: libexchange-storage1.2-1
Status: purge ok not-installed
Priority: optional
Section: libs

Package: fireflier-server
Status: purge ok not-installed
Priority: optional
Section: net

Package: openoffice.org-impress
Status: purge ok not-installed
Priority: optional
Section: editors

Package: libegroupwise1.2-10
Status: purge ok not-installed
Priority: optional
Section: libs

Package: fdutils
Status: install ok installed
Priority: optional
Section: base
Installed-Size: 940
Maintainer: Jochen Voss <voss@debian.org>
Version: 5.4-20040228-1
Replaces: miscutils, manpages (<< 1.11-3)
Depends: libc6 (>= 2.3.2.ds1-4), debianutils (>= 1.7)
Recommends: mtools (>= 3.8-1)
Conffiles:
 /etc/mediaprm 634ea1478e3db69c0a12fc08dbd057fb
 /etc/fdmount.conf b9365eca8374c0b402c19a7a9b781b77
Description: Linux floppy utilities
 This package contains utilities for formatting extra capacity
 disks, for automatic floppy disk mounting and unmounting, etc.
 .
 The package includes the following items:
 .
   * superformat: formats high capacity disks of (up to 1992k
     for high density disks or up to 3984k for extra density
     disks)
   * fdmount: automatically mounts/unmounts disks when they are
     inserted/removed.
   * xdfcopy: formats, reads and writes OS/2's XDF disks.
   * MAKEFLOPPIES: creates the floppy devices in /dev
   * getfdprm: prints the current disk geometry (number of
     sectors, track and heads etc)
   * setfdprm: sets the current disk geometry
   * fdrawcmd: sends raw commands to the floppy driver
   * floppycontrol: configure the floppy driver
   * General documentation about the floppy driver
 .
 Note that these utilities do not work for USB floppy drives, because
 there is no direct access to the floppy controller.
 .
 Homepage: http://www.tux.org/pub/knaff/fdutils/

Package: openoffice.org-help-en
Status: purge ok not-installed
Priority: optional
Section: editors

Package: php4-gd
Status: purge ok not-installed
Priority: optional
Section: web

Package: linux-image-2.6.18-4-prep
Status: purge ok not-installed
Priority: optional
Section: admin

Package: pciutils
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 512
Maintainer: Remco van de Meent <remco@debian.org>
Version: 1:2.1.11-15
Replaces: libpci2
Depends: libc6 (>= 2.3.2.ds1-4)
Suggests: wget | lynx
Conflicts: libpci2 (<< 1:2.1.11-11), hardinfo (<= 0.3.6-3), kudzu (<= 1.1.36-2), sndconfig (<= 0.70-2), alsa-utils (<< 1.0.5-3)
Description: Linux PCI Utilities
 This package contains various utilities for inspecting and setting of
 devices connected to the PCI bus.

Package: libvlc0
Status: purge ok not-installed
Priority: optional
Section: libs

Package: postgresql-server-dev-7.4
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: base-config
Status: install ok installed
Priority: optional
Section: base
Installed-Size: 1540
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: all
Version: 2.53.10.2
Depends: debconf (>= 1.3.22), apt, adduser, console-data (>= 2002.12.04dbs-16), console-tools, passwd (>= 20000902-6), bsdutils (>= 1:2.11l), debianutils (>= 1.6), gettext-base
Conflicts: tasksel (<< 2.00)
Conffiles:
 /etc/logrotate.d/base-config 5d900eb788b130065b324325b239a9ec
Description: Debian base system configurator
 This package handles setting up the Debian base system. It contains the
 configuration program you see when you install Debian for the first time
 and boot up your new Debian system.
 .
 It can be removed with no ill effects -- once your Debian system is
 installed, this package's only useful function is to allow you to
 reconfigure some things.

Package: openoffice.org-qa-tools
Status: purge ok not-installed
Priority: extra
Section: devel

Package: libecpg5
Status: purge ok not-installed
Priority: optional
Section: libs

Package: manpages-dev
Status: install ok installed
Priority: standard
Section: doc
Installed-Size: 2660
Maintainer: Martin Schulze <joey@debian.org>
Source: manpages
Version: 1.70-1
Depends: manpages
Suggests: man-browser
Description: Manual pages about using GNU/Linux for development
 These man pages describe the Linux programming interface, including
 these two sections:
 2 = Linux system calls.
 3 = Library calls (note that a more comprehensive source of information
     may be found in the glibc-doc package).

Package: libdns16
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1120
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: powerpc
Source: bind9
Version: 1:9.2.4-1sarge2
Replaces: libbind0
Depends: libc6 (>= 2.3.2.ds1-21), libisc7, libssl0.9.7
Conflicts: libbind0
Description: DNS Shared Library used by BIND
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers the libdns shared library used by BIND's daemons and
 clients.

Package: mtools
Status: install ok installed
Priority: standard
Section: otherosfs
Installed-Size: 480
Maintainer: Luis Bustamante <luferbu@fluidsignal.com>
Version: 3.9.9-2.1
Depends: libc6 (>= 2.3.2.ds1-4)
Suggests: floppyd
Conffiles:
 /etc/mtools.conf 659bb18a4490dcb17ad0b0139c2fb654
Description: Tools for manipulating MSDOS files
 Mtools is a collection of utilities to access MS-DOS disks from Unix
 without mounting them. It supports Win'95 style long file names, OS/2
 Xdf disks, ZIP/JAZ disks and 2m disks (store up to 1992kB on a high
 density 3 1/2 disk).
 .
 Also included in this package are commands to eject and manipulate
 the write/password protection control of Zip disks.

Package: libestraier7
Status: purge ok not-installed
Priority: optional
Section: text

Package: libldap2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 412
Maintainer: Torsten Landschoff <torsten@debian.org>
Architecture: powerpc
Source: openldap2
Version: 2.1.30-8
Replaces: libopenldap-runtime, libldap2-tls
Provides: libldap2-tls
Depends: libc6 (>= 2.3.2.ds1-21), libgnutls11 (>= 1.0.16), libsasl2 (>= 2.1.19)
Conflicts: libldap2-tls, ldap-utils (<= 2.1.23-1)
Conffiles:
 /etc/ldap/ldap.conf 5f104fc31ae3b89e5958d2ce2d5f3ddd
Description: OpenLDAP libraries
 These are the run-time libraries for the OpenLDAP (Lightweight Directory
 Access Protocol) servers and clients.

Package: mtr-tiny
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 112
Maintainer: Robert Woodcock <rcw@debian.org>
Source: mtr
Version: 0.67-1
Replaces: mtr
Depends: libc6 (>= 2.3.2.ds1-4), libncurses5 (>= 5.4-1)
Conflicts: suidmanager (<< 0.50), mtr
Description: Full screen ncurses traceroute tool
 mtr combines the functionality of the 'traceroute' and 'ping' programs
 in a single network diagnostic tool.
 .
 As mtr starts, it investigates the network connection between the host
 mtr runs on and a user-specified destination host.  After it
 determines the address of each network hop between the machines,
 it sends a sequence ICMP ECHO requests to each one to determine the
 quality of the link to each machine.  As it does this, it prints
 running statistics about each machine.
 .
 mtr-tiny is compiled without support for X and conserves disk space.

Package: openoffice.org-officebean
Status: purge ok not-installed
Priority: optional
Section: misc

Package: dia
Status: purge ok not-installed
Priority: optional
Section: graphics

Package: bc
Status: install ok installed
Priority: standard
Section: math
Installed-Size: 196
Maintainer: Dirk Eddelbuettel <edd@debian.org>
Version: 1.06-15
Depends: libc6 (>= 2.3.2.ds1-4), libncurses5 (>= 5.4-1), libreadline4 (>= 4.3-1)
Description: The GNU bc arbitrary precision calculator language
 GNU bc is an interactive algebraic language with arbitrary precision which
 follows the POSIX 1003.2 draft standard, with several extensions including
 multi-character variable names, an `else' statement and full Boolean
 expressions.  GNU bc does not require the separate GNU dc program.

Package: libgdbmg1
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 72
Maintainer: James Troup <james@nocrew.org>
Source: gdbm173
Version: 1.7.3-28
Provides: elf-libgdbm
Depends: libc6 (>= 2.3.1-1)
Conflicts: libgdbm1 (<< 1.7.3-20)
Description: GNU dbm database routines (runtime version)
 GNU dbm ('gdbm') is a library of database functions that use extendible
 hashing and works similarly to the standard UNIX 'dbm' functions.
 .
 The basic use of 'gdbm' is to store key/data pairs in a data file, thus
 providing a persistent version of the 'dictionary' Abstract Data Type
 ('hash' to perl programmers).

Package: netbase
Status: install ok installed
Priority: important
Section: base
Installed-Size: 184
Maintainer: Anthony Towns <ajt@debian.org>
Architecture: all
Version: 4.21
Depends: ifupdown (>= 0.6.4-4.9), netkit-inetd, tcpd, iputils-ping | ping, debconf
Conflicts: xinetd (<= 2.2.1-8), netstd (<< 3.00), nfs-common (<< 1:0.3.2-1), nfs-user-server (<< 2.2beta47-9), nis (<= 3.6-2), rstatd (<= 3.03-3), rwalld (<= 0.16-1), rusersd (<= 0.17-1), ugidd (<< 2.2beta47-9)
Conffiles:
 /etc/protocols e1b2c07d83ff5322a6353945a5c4b7e6
 /etc/init.d/networking af609ab93465d73fbfd14f091ea3cb01
 /etc/services 8a04f87ad04f4a1d3c7e6ca12e07290d
 /etc/rpc f0b6f6352bf886623adc04183120f83b
Description: Basic TCP/IP networking system
 This package provides the necessary infrastructure for basic TCP/IP based
 networking.

Package: libmagic1
Status: install ok not-installed
Priority: standard
Section: libs

Package: libqt4-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: whiptail
Status: install ok installed
Priority: standard
Section: base
Installed-Size: 100
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Source: newt
Version: 0.51.6-20
Replaces: newt0.10, newt0.21 (<< 0.21-4), whiptail-utf8
Provides: whiptail-provider, whiptail-utf8
Depends: libc6 (>= 2.3.2.ds1-4), libnewt0.51, libpopt0 (>= 1.7), slang1a-utf8 (>> 1.4.9dbs-4), libnewt0.51 (= 0.51.6-20)
Conflicts: whiptail-provider
Description: Displays user-friendly dialog boxes from shell scripts
 Whiptail is a "dialog" replacement using newt instead of ncurses. It
 provides a method of displaying several different types of dialog boxes
 from shell scripts. This allows a developer of a script to interact with
 the user in a much friendlier manner.

Package: hfsutils
Status: install ok installed
Priority: optional
Section: otherosfs
Installed-Size: 240
Maintainer: Rob Browning <rlb@defaultvalue.org>
Version: 3.2.6-7
Depends: libc6 (>= 2.2.3-1)
Suggests: hfsutils-tcltk
Description: Tools for reading and writing Macintosh volumes.
 HFS is the native Macintosh filesystem format.
 .
 This package contains several command-line utilities for
 reading and writing Macintosh HFS-formatted media such as
 floppy disks, CD-ROMs, and hard disks.

Package: iceape
Status: purge ok not-installed
Priority: optional
Section: web

Package: libpam-smbpass
Status: purge ok not-installed
Priority: extra
Section: admin

Package: icedove-dbg
Status: purge ok not-installed
Priority: optional
Section: mail

Package: libpam-modules
Status: install ok installed
Priority: required
Section: base
Installed-Size: 644
Maintainer: Sam Hartman <hartmans@debian.org>
Source: pam
Version: 0.76-22
Replaces: libpam0g-util
Provides: libpam-motd, libpam-mkhomedir
Depends: libc6 (>= 2.3.2.ds1-4), libcap1, libdb3 (>= 3.2.9-20), libpam0g (>= 0.76)
Conflicts: libpam0g-modules (= 0.66-1), libpam-motd, libpam-mkhomedir, suidmanager (<< 0.50)
Conffiles:
 /etc/security/access.conf 7978ff72bf45c60b1055c32eec4b0441
 /etc/security/pam_env.conf 0b41577083f3c29d0dcef8cafce3242e
 /etc/security/group.conf 0abd9d08c21f37578c7e04b9c2bd5526
 /etc/security/limits.conf b325f3dd52897a4105a75649f15703c2
 /etc/security/time.conf 62a54a799a700e506c24a22ad768ca64
Description: Pluggable Authentication Modules for PAM
 This package completes the set of modules for PAM. It includes the
  pam_unix_*.so module as well as some specialty modules.

Package: fai-kernels
Status: purge ok not-installed
Priority: extra
Section: admin

Package: libestraier-ruby1.8
Status: purge ok not-installed
Priority: optional
Section: text

Package: python
Status: purge ok not-installed
Priority: standard
Section: interpreters

Package: postgresql-contrib-7.4
Status: purge ok not-installed
Priority: optional
Section: misc

Package: aircrack
Status: purge ok not-installed
Priority: extra
Section: net

Package: samba-doc-pdf
Status: purge ok not-installed
Priority: optional
Section: doc

Package: ekg
Status: purge ok not-installed
Priority: optional
Section: net

Package: ifupdown
Status: install ok installed
Priority: important
Section: base
Installed-Size: 244
Maintainer: Anthony Towns <ajt@debian.org>
Architecture: powerpc
Version: 0.6.7
Replaces: netbase (<< 4.00)
Depends: net-tools, libc6 (>= 2.3.2.ds1-21), debconf (>= 1.2.0) | debconf-2.0
Suggests: iproute, dhcp3-client | dhcp-client, ppp
Conffiles:
 /etc/init.d/ifupdown 930468664d52a161afae58dd35bf7742
 /etc/init.d/ifupdown-clean 8897254948272edf3551a2c32ee63b84
 /etc/default/ifupdown fab851ca87c5deb9d6f665e610184648
Description: high level tools to configure network interfaces
 This package provides the tools ifup and ifdown which may be used to
 configure (or, respectively, deconfigure) network interfaces based on
 interface definitions in the file /etc/network/interfaces.

Package: pidentd
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 148
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Version: 3.0.18-2
Replaces: netstd, pidentd-des (<< 3.0.14)
Provides: ident-server
Depends: netbase, adduser, passwd, libc6 (>= 2.3.2.ds1-4), libssl0.9.7
Conflicts: ident-server
Conffiles:
 /etc/identd.conf 2e9dd2f59c8ae1109dd99541952d0bc6
Description: TCP/IP IDENT protocol server with DES support
 Identd is a server which implements the TCP/IP proposed standard IDENT user
 identification protocol as specified in the RFC 1413 document.
 .
 This package has been built with DES support.
 .
 Homepage http://www.lysator.liu.se/~pen/pidentd/

Package: libcamel1.2-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: iceape-dom-inspector
Status: purge ok not-installed
Priority: optional
Section: web

Package: libapache2-mod-jk
Status: purge ok not-installed
Priority: optional
Section: net

Package: php4-mcrypt
Status: purge ok not-installed
Priority: optional
Section: web

Package: openoffice.org-l10n-ve
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-l10n-vi
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-dbg
Status: purge ok not-installed
Priority: extra
Section: devel

Package: libgimp2.0
Status: purge ok not-installed
Priority: optional
Section: libs

Package: doc-linux-text
Status: install ok installed
Priority: standard
Section: doc
Installed-Size: 9136
Maintainer: Debian LDP Maintainers <pkg-doc-linux-devel@lists.alioth.debian.org>
Source: doc-linux
Version: 2005.04-1
Replaces: doc-linux, doc-linux-html (<< 98.06-1), doc-linux-nonfree-text (<< 2004.09-1)
Suggests: doc-linux-html
Conflicts: doc, doc-linux
Description: Linux HOWTOs and FAQs in ASCII format
 The doc-linux-text package provides the current Linux HOWTOs and FAQs in
 ASCII format. Alternatively, HTML versions are provided in the
 doc-linux-html package.
 .
 The version number reflects the month in which doc-linux-text was created.
 .
 All files are available at http://www.tldp.org/ (with versions in ASCII,
 DVI, HTML, postscript, and SGML).
 .
 Documents with licences that fail to meet the Debian Free Software
 Guidelines can be found in the doc-linux-nonfree-text package.

Package: linux-image-2.6.18-4-powerpc64
Status: purge ok not-installed
Priority: optional
Section: admin

Package: openoffice.org-l10n-lo
Status: purge ok not-installed
Priority: optional
Section: editors

Package: fileutils
Status: install ok installed
Priority: required
Section: base
Installed-Size: 16
Maintainer: Michael Stone <mstone@debian.org>
Architecture: all
Source: coreutils
Version: 5.2.1-2
Pre-Depends: coreutils
Description: The GNU file management utilities (transitional package)
 Empty package to facilitate upgrades, can be safely removed.

Package: openoffice.org-l10n-lv
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-l10n-lt
Status: purge ok not-installed
Priority: optional
Section: editors

Package: libecal1.2-6
Status: purge ok not-installed
Priority: optional
Section: libs

Package: console-data
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 3956
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Version: 2002.12.04dbs-49
Replaces: console-tools-data
Provides: console-tools-data, console-keymaps
Depends: debconf (>= 0.5), console-common
Recommends: console-tools (>= 1:0.2.3-16) | kbd (>= 0.99-12)
Conflicts: kbd (<= 0.96a-1), kbd-data, console-tools-data
Description: Keymaps, fonts, charset maps, fallback tables for console-tools
 This package contains the standard data files for the Linux Console Tools.
 .
 This includes keyboard definitions (keymaps), console fonts for various
 encodings, maps defining the standard charsets for use by text applications,
 and fallback tables allowing to approximate an unavailable character's glyph
 with the glyph of another character in the current font.

Package: openoffice.org-help-en-gb
Status: purge ok not-installed
Priority: optional
Section: doc

Package: pcmcia-modules-2.2.20-pmac
Status: purge ok not-installed

Package: libebook1.2-5
Status: purge ok not-installed
Priority: optional
Section: libs

Package: shellutils
Status: install ok installed
Priority: required
Section: base
Installed-Size: 16
Maintainer: Michael Stone <mstone@debian.org>
Architecture: all
Source: coreutils
Version: 5.2.1-2
Pre-Depends: coreutils
Description: The GNU shell programming utilities (transitional package)
 Empty package to facilitate upgrades, can be safely removed.

Package: dhcp-client
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 312
Maintainer: Eloy A. Paris <peloy@debian.org>
Source: dhcp
Version: 2.0pl5-19.1sarge2
Replaces: dhcp-client-beta
Depends: libc6 (>= 2.3.2.ds1-21)
Conflicts: dhcp-client-beta, dhcpcd
Conffiles:
 /etc/dhclient-script 754f7b5c3bba1bf519b50b52e110c63e
 /etc/dhclient.conf 10830c7543724cfd36f10dd87a5f98eb
Description: DHCP Client
 This is a split off from the dhcp package and contains the DHCP client
 tools.
 .
 Cable modem users likely need this or another dhcp client to successfully
 connect to the network.
 .
 Documentation (apart from manpages) can be found in the dhcp package.
 .
 Note: This package _requires_ a 2.2.x or later Linux kernel. 2.0.x
 kernels are _not_ supported.
 .
 This is the DHCP client from version 2 of the Internet Software
 Consortium DHCP package. For more information visit the ISC web site
 at http://www.isc.org.

Package: gawk
Status: purge ok not-installed
Priority: optional
Section: interpreters

Package: linux-source-2.6.18
Status: purge ok not-installed
Priority: optional
Section: devel

Package: mozilla-thunderbird
Status: purge ok not-installed
Priority: optional
Section: mail

Package: pcmcia-cs
Status: purge ok not-installed
Priority: extra
Section: base

Package: open-iscsi
Status: purge ok not-installed
Priority: optional
Section: net

Package: openoffice.org-l10n-xh
Status: purge ok not-installed
Priority: optional
Section: editors

Package: libnewt0
Status: install ok installed
Priority: standard
Section: base
Installed-Size: 128
Maintainer: Enrique Zanardi <ezanard@debian.org>
Source: newt
Version: 0.50.17-9.6
Depends: libc6 (>= 2.2.4-4), slang1 (>> 1.4.4-7.1)
Conflicts: libnewt-utf8-0
Description: Not Erik's Windowing Toolkit - text mode windowing with slang
 Newt is a windowing toolkit for text mode built from the slang library.
 It allows color text mode applications to easily use stackable windows,
 push buttons, check boxes, radio buttons, lists, entry fields, labels,
 and displayable text. Scrollbars are supported, and forms may be nested
 to provide extra functionality. This package contains the shared library
 for programs that have been built with newt.

Package: otrs2
Status: purge ok not-installed
Priority: optional
Section: web

Package: libmozjs0d
Status: purge ok not-installed
Priority: optional
Section: libs

Package: libnss3-0d
Status: purge ok not-installed
Priority: optional
Section: libs

Package: clamav
Status: purge ok not-installed
Priority: optional
Section: utils

Package: evolution-data-server
Status: purge ok not-installed
Priority: optional
Section: gnome

Package: vlc-plugin-sdl
Status: purge ok not-installed
Priority: optional
Section: graphics

Package: tar
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 1432
Maintainer: Bdale Garbee <bdale@gag.com>
Version: 1.14-2.3
Replaces: cpio
Pre-Depends: libc6 (>= 2.3.2.ds1-21)
Suggests: bzip2
Conflicts: cpio (<= 2.4.2-38)
Conffiles:
 /etc/rmt 3c58b7cd13da1085eff0acc6a00f43c7
Description: GNU tar
 Tar is a program for packaging a set of files as a single archive in tar
 format.  The function it performs is conceptually similar to cpio, and to
 things like PKZIP in the DOS world.  It is heavily used by the Debian package
 management system, and is useful for performing system backups and exchanging
 sets of files with others.

Package: file
Status: install ok not-installed
Priority: standard
Section: utils

Package: openoffice.org-dtd-officedocument1.0
Status: purge ok not-installed
Priority: extra
Section: text

Package: iceape-dbg
Status: purge ok not-installed
Priority: extra
Section: devel

Package: openoffice.org-base
Status: purge ok not-installed
Priority: optional
Section: editors

Package: krb5-user
Status: purge ok not-installed
Priority: optional
Section: net

Package: linux-headers-2.6.18-4-vserver
Status: purge ok not-installed
Priority: optional
Section: devel

Package: openoffice.org-l10n-zh-tw
Status: purge ok not-installed
Priority: optional
Section: editors

Package: libxul-common
Status: purge ok not-installed
Priority: optional
Section: libs

Package: quagga-doc
Status: purge ok not-installed
Priority: optional
Section: net

Package: libmozjs0d-dbg
Status: purge ok not-installed
Priority: extra
Section: libdevel

Package: dovecot-pop3d
Status: purge ok not-installed
Priority: optional
Section: mail

Package: winbind
Status: install ok not-installed
Priority: optional
Section: net

Package: zlib1g
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 160
Maintainer: Mark Brown <broonie@debian.org>
Source: zlib
Version: 1:1.2.2-4.sarge.2
Replaces: zlib1g-udeb
Provides: libz1
Depends: libc6 (>= 2.3.2.ds1-21)
Conflicts: zlib1 (<= 1:1.0.4-7), zlib1g-udeb
Description: compression library - runtime
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This package includes the shared library.

Package: libpgtypes2
Status: purge ok not-installed
Priority: optional
Section: libs

Package: libxul-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: python-newt
Status: purge ok not-installed
Priority: standard
Section: interpreters

Package: libnspr4-0d-dbg
Status: purge ok not-installed
Priority: extra
Section: libdevel

Package: openoffice.org-l10n-en-za
Status: purge ok not-installed
Priority: optional
Section: editors

Package: adduser
Status: install ok installed
Priority: important
Section: base
Installed-Size: 628
Maintainer: Debian Adduser Developers <adduser-devel@lists.alioth.debian.org>
Version: 3.63
Depends: perl-base (>= 5.6.0), passwd (>= 961025), debconf
Suggests: liblocale-gettext-perl, perl-modules
Conffiles:
 /etc/deluser.conf 95bbf430862075fdf99330e882998e66
Description: Add and remove users and groups
 This package includes the adduser and deluser commands for creating
 and removing users.
 .
 o Adduser can create new users and groups and add existing users to
   existing groups.
 o Deluser can remove users and groups and remove users from a given
   group.
 .
 Adding users with adduser is much easier than adding them by hand.
 Adduser will choose appropriate UID and GID values, create a home
 directory, copy skeletal user configuration, allow you to set an
 initial password and the GECOS field.
 .
 Deluser can optionally remove and backup the user's home directory
 and mail spool or all files on the system owned by him.
 .
 Optionally a custom script can be executed after each of the commands.
 .
 Adduser is maintained on http://alioth.debian.org/projects/adduser/.
 There is also a development mailing list on
 http://lists.alioth.debian.org/mailman/listinfo/adduser-devel/.

Package: modutils
Status: install ok installed
Priority: required
Section: base
Installed-Size: 700
Maintainer: LaMont Jones <lamont@debian.org>
Version: 2.4.26-1.2
Replaces: manpages (<= 1.15-3)
Depends: libc6 (>= 2.3.2.ds1-4), sysvinit (>= 2.71-2)
Suggests: ksymoops
Conffiles:
 /etc/cron.daily/modutils 10fc6b90de70ffa3594d6c47ec9be935
 /etc/init.d/modutils db89ea32d1a0f556db6f8e0aff5d5da1
 /etc/modutils/0keep 89c032bf9e755bf0b1666227d20df03e
 /etc/modutils/aliases 74cf668d03427b6690bb99e6a4dfd372
 /etc/modutils/actions 263c2a73eab64f6797b43418cc658a51
 /etc/modutils/paths d8a5a8df20d379f1078b826806ef8115
 /etc/modutils/arch/alpha a06fe12e20ddc763c9570267b41b0e10
 /etc/modutils/arch/i386 f9e3eac60200d41dd5569eeabb4eddff
 /etc/modutils/arch/m68k.generic 2c847312df7201d7004943482a0d1b4a
 /etc/modutils/arch/m68k.amiga f07da2ebf00c6ed6649bae5501b84c4f
 /etc/modutils/arch/m68k.atari 2893201cc7f7556160fa9cd1fb5ba56a
 /etc/modutils/arch/m68k.mac b96b83b867551b23d221c4d67952d2f7
 /etc/modutils/arch/powerpc.apus bcfd7aa94c8e2453dd6a448c06f172f5
 /etc/modutils/arch/powerpc.generic 86faaa356a37e5a673c6c158ea80e2ba
 /etc/modutils/arch/powerpc.pmac d6c5d69f128424be7efbe568a49336ab
 /etc/modutils/arch/s390 37b9990c51e898f82d22d7c01f761928
Description: Linux module utilities
 These utilities are intended to make a Linux modular kernel
 manageable for all users, administrators and distribution
 maintainers.

Package: mozilla-browser
Status: purge ok not-installed
Priority: optional
Section: web

Package: iceweasel-dom-inspector
Status: purge ok not-installed
Priority: optional
Section: web

Package: locales
Status: install ok installed
Priority: standard
Section: base
Installed-Size: 10372
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Source: glibc
Version: 2.3.2.ds1-22sarge6
Replaces: localebin, wg15-locale, libc6-bin, i18ndata, glibc2, locale-ja, locale-ko, locale-vi, locale-zh
Provides: i18ndata
Depends: glibc-2.3.2.ds1-22sarge6, debconf (>= 0.2.26)
Conflicts: localebin, wg15-locale, i18ndata, locale-ja, locale-ko, locale-vi, locale-zh
Conffiles:
 /etc/locale.alias bb5e3f18c56ca04addc8f62e43a38a1d
Description: GNU C Library: National Language (locale) data [support]
 Machine-readable data files, shared objects and programs used by the
 C library for localization (l10n) and internationalization (i18n) support.
 .
 This package contains the libc.mo i18n files, plus tools to generate
 locale definitions from source files (included in this package). It allows
 you to customize which definitions actually get generated. This is a
 savings over how this package used to be, where all locales were generated
 by default. This created a package that unpacked to an excess of 30 megs.

Package: evolution-data-server-dbg
Status: purge ok not-installed
Priority: extra
Section: gnome

Package: mozilla-calendar
Status: purge ok not-installed
Priority: optional
Section: misc

Package: python2.4
Status: install ok installed
Priority: optional
Section: python
Installed-Size: 11956
Maintainer: Matthias Klose <doko@debian.org>
Version: 2.4.1-2sarge1
Provides: python2.4-cjkcodecs
Depends: libbz2-1.0, libc6 (>= 2.3.2.ds1-21), libdb4.2, libncurses5 (>= 5.4-1), libreadline4 (>= 4.3-1), libssl0.9.7, zlib1g (>= 1:1.2.1)
Suggests: python2.4-doc, python2.4-profiler
Conflicts: python2.4-dev (<< 2.3.95-2)
Conffiles:
 /etc/python2.4/site.py 66628488d9159219d7776f1bce499306
Description: An interactive high-level object-oriented language (version 2.4)
 Version 2.4 of the high-level, interactive object oriented language,
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.

Package: php5-cgi
Status: purge ok not-installed
Priority: optional
Section: web

Package: python2.1
Status: deinstall ok config-files
Priority: standard
Section: interpreters
Installed-Size: 5664
Maintainer: Gregor Hoffleit <flight@debian.org>
Version: 2.1.3-3.2
Config-Version: 2.1.3-3.2
Replaces: python2.1-base, python2.1-ssl
Depends: python, libc6 (>= 2.2.4-4), libdb3 (>= 3.2.9-16), libncurses5 (>= 5.2.20020112a-1), libreadline4 (>= 4.2a-4), libssl0.9.6, zlib1g (>= 1:1.1.4)
Suggests: python2.1-doc
Conflicts: python (<< 1.5.2-18), python-base (<= 1.5.2-18.3), python1.5-base (<= 1.5.2-18.3), python2.1-base, python2.1-regrtest (<= 2.1.1-3), python2.1-ssl
Conffiles:
 /etc/python2.1/site.py fc308cba3c29bf9aeb5e47c8f37651ef
Description: An interactive object-oriented scripting language (version 2.1)
 Version 2.1 of the interpretive, interactive object oriented language,
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.

Package: python2.3
Status: deinstall ok config-files
Priority: standard
Section: python
Installed-Size: 10268
Maintainer: Matthias Klose <doko@debian.org>
Version: 2.3.5-3sarge2
Config-Version: 2.3.5-3sarge2
Replaces: python2.3-xmlbase
Provides: python2.3-xmlbase
Depends: libbz2-1.0, libc6 (>= 2.3.2.ds1-21), libdb4.2, libncurses5 (>= 5.4-1), libreadline4 (>= 4.3-1), libssl0.9.7, zlib1g (>= 1:1.2.1)
Recommends: python2.3-iconvcodec | python2.3-cjkcodecs | python2.3-japanese-codecs, python2.3-iconvcodec | python2.3-cjkcodecs | python2.3-korean-codecs
Suggests: python2.3-doc, python2.3-profiler
Conflicts: python2.3-xmlbase, python2.3-csv, python2.3-dev (<< 2.3.4-15)
Conffiles:
 /etc/python2.3/site.py 8eb9ffc159683a8f12d63c07335b745a
Description: An interactive high-level object-oriented language (version 2.3)
 Version 2.3 of the high-level, interactive object oriented language,
 includes an extensive class library with lots of goodies for
 network programming, system administration, sounds and graphics.

Package: libgimp2.0-doc
Status: purge ok not-installed
Priority: optional
Section: doc

Package: slang1a-utf8
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 624
Maintainer: Jim Mintha <jmintha@debian.org>
Source: slang
Version: 1.4.9dbs-8
Depends: libc6 (>= 2.3.2.ds1-4)
Conflicts: slang1-utf8
Description: The S-Lang programming library with utf8 support
 S-Lang is a C programmer's library that includes routines for the rapid
 development of sophisticated, user friendly, multi-platform applications.
 .
 This package contains only the shared library libslang.so.* and copyright
 information. It is only necessary for programs that use this library (such
 as jed and slrn). If you plan on doing development with S-Lang, you will
 need the companion -dev package as well.
 This packages has wide character support.

Package: manpages
Status: install ok installed
Priority: important
Section: doc
Installed-Size: 696
Maintainer: Martin Schulze <joey@debian.org>
Version: 1.70-1
Replaces: rsh-server (<< 0.10-7)
Suggests: man-browser
Description: Manual pages about using a GNU/Linux system
 This package contains GNU/Linux manual pages for these sections:
 4 = Devices (e.g. hd, sd).
 5 = File formats and protocols, syntaxes of several system
     files (e.g. wtmp, /etc/passwd, nfs).
 7 = Conventions and standards, macro packages, etc.
     (e.g. nroff, ascii).
 .
 Sections 1, 6 and 8 are provided by the respective applications. This
 package only includes the intro man page describing the section.
 .
 The man pages describe syntaxes of several system files.

Package: ed
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 160
Maintainer: James Troup <james@nocrew.org>
Version: 0.2-20
Depends: libc6 (>= 2.3.1-1)
Description: The classic unix line editor
 ed is a line-oriented text editor.  It is used to
 create, display, modify and otherwise manipulate text
 files.
 .
 red is a restricted ed: it can only edit files in the
 current directory and cannot execute shell commands.

Package: tasksel
Status: install ok installed
Priority: optional
Section: base
Installed-Size: 1308
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: all
Version: 2.24
Depends: debconf (>= 0.5) | debconf-2.0, liblocale-gettext-perl, aptitude (>= 0.2.15-1)
Conflicts: debconf (<< 1.4.27), base-config (<< 2.32)
Description: Tool for selecting tasks for installation on Debian system
 This package provides 'tasksel', a simple interface for users who
 want to pick general tasks for installation on their Debian GNU/Linux
 system. This program is used during the installation process, but
 users can also use tasksel at any point.

Package: pppconfig
Status: install ok installed
Priority: optional
Section: base
Installed-Size: 1300
Maintainer: John Hasler <jhasler@debian.org>
Version: 2.3.11
Depends: ppp (>= 2.3.7), whiptail | dialog
Conffiles:
 /etc/init.d/dns-clean 62a33a46f4e69ab21b72bece0f83c1f1
 /etc/ppp/ip-up.d/0dns-up b77d104e74ecccf775e27a5305e8285e
 /etc/ppp/ip-down.d/0dns-down b831980ed064aa8625df19a89fe33bd8
Description: A text menu based utility for configuring ppp
 It provides extensive explanations at each step.  pppconfig supports
 PAP, CHAP, and chat methods of authentication.  It uses the standard
 ppp configuration files and sets ppp up so that the standard pon and
 poff commands can be used to control ppp.
 Some features supported by pppconfig are:
  - Multiple ISPs with separate nameservers.
  - Modem detection.
  - Dynamic DNS.
  - Dial on demand.

Package: libgcc1
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 176
Maintainer: Debian GCC maintainers <debian-gcc@lists.debian.org>
Source: gcc-3.4 (3.4.3-13sarge1)
Version: 1:3.4.3-13sarge1
Depends: libc6 (>= 2.3.2.ds1-21)
Description: GCC support library
 Shared version of the support library, a library of internal subroutines
 that GCC uses to overcome shortcomings of particular machines, or
 special needs for some languages.

Package: openoffice.org-help-zh-tw
Status: purge ok not-installed
Priority: optional
Section: doc

Package: linux-tree-2.6.18
Status: purge ok not-installed
Priority: optional
Section: devel

Package: openoffice.org-l10n-in
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-math
Status: purge ok not-installed
Priority: optional
Section: editors

Package: gimp-data
Status: purge ok not-installed
Priority: optional
Section: graphics

Package: openoffice.org-l10n-it
Status: purge ok not-installed
Priority: optional
Section: editors

Package: linux-manual-2.6.18
Status: purge ok not-installed
Priority: optional
Section: doc

Package: openoffice.org-l10n-ga
Status: purge ok not-installed
Priority: optional
Section: editors

Package: libwpd-tools
Status: purge ok not-installed
Priority: optional
Section: utils

Package: qt4-dev-tools
Status: purge ok not-installed
Priority: optional
Section: devel

Package: curl
Status: purge ok not-installed
Priority: optional
Section: web

Package: vlc-plugin-alsa
Status: purge ok not-installed
Priority: optional
Section: graphics

Package: dia-libs
Status: purge ok not-installed
Priority: optional
Section: graphics

Package: php5-gd
Status: purge ok not-installed
Priority: optional
Section: web

Package: libsmbclient
Status: purge ok not-installed
Priority: optional
Section: libs

Package: linux-image-2.6.18-4-powerpc-smp
Status: purge ok not-installed
Priority: optional
Section: admin

Package: openoffice.org-l10n-sk
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-l10n-sl
Status: purge ok not-installed
Priority: optional
Section: editors

Package: php5-sqlite
Status: purge ok not-installed
Priority: optional
Section: web

Package: gimp-svg
Status: purge ok not-installed
Priority: optional
Section: graphics

Package: base-files
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 364
Maintainer: Santiago Vila <sanvila@debian.org>
Version: 3.1.2
Replaces: base, miscutils
Provides: base
Depends: awk, base-passwd (>= 2.0.3.4)
Conffiles:
 /etc/debian_version 61ac235d4b5a07839ed0f3af03d4f15e
 /etc/host.conf a61b9f6548d337c1cc1e5a4de39f7b7f
 /etc/issue c492a8e6247e77a95284c93265f9a254
 /etc/issue.net 83d0f8f05ca2a738d2da6f287a0a66e0
 /etc/nsswitch.conf 109e33e2c91d1853b5bc56078a96aa18
Description: Debian base system miscellaneous files
 This package contains the basic filesystem hierarchy of a Debian system, and
 several important miscellaneous files, such as /etc/debian_version,
 /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, /etc/nsswitch.conf,
 and others, and the text of several common licenses in use on Debian systems.

Package: openoffice.org-l10n-ss
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-l10n-sv
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-help-km
Status: purge ok not-installed
Priority: optional
Section: doc

Package: openoffice.org-l10n-st
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-help-ko
Status: purge ok not-installed
Priority: optional
Section: doc

Package: doc-debian
Status: install ok installed
Priority: standard
Section: doc
Installed-Size: 920
Maintainer: Josip Rodin <joy-packages@debian.org>
Version: 3.1
Suggests: www-browser, postscript-viewer
Description: Debian Project documentation, Debian FAQ and other documents
 The Debian Project is an association of individuals who have made
 common cause to create a free operating system.
 .
 In this package, you will find:
   * Debian Linux Manifesto,
   * Constitution for the Debian Project,
   * Debian GNU/Linux Social Contract,
   * Debian Free Software Guidelines.
 .
 Additionally provided are:
   * Debian GNU/Linux Frequently Asked Questions (FAQ),
   * Debian Bug Tracking System documentation, and
   * Introduction to the Debian mailing lists.
 .
 All of these files are available at ftp://ftp.debian.org/debian/doc/ and
 mirrors thereof.

Package: flex
Status: install ok installed
Priority: standard
Section: devel
Installed-Size: 844
Maintainer: Manoj Srivastava <srivasta@debian.org>
Version: 2.5.31-31sarge1
Depends: libc6 (>= 2.3.2.ds1-21), m4
Recommends: gcc | c-compiler
Suggests: bison
Description: A fast lexical analyzer generator.
 flex is a tool for generating scanners: programs which recognized lexical
 patterns in text. flex reads the given input files for a description of a
 scanner to generate. The description is in the form of pairs of regular
 expressions and C code, called rules. flex generates as output a C source
 file, lex.yy.c, which defines a routine yylex().  This file is compiled
 and linked with the -lfl library to produce an executable. When the
 executable is run, it analyzes its input for occurrences of the regular
 expressions. Whenever it finds one, it executes the corresponding C code.
 .
 The behaviour of Flex has undergone a major change since version
 2.5.4a; Flex scanners are now reenterant, you may have multiple
 scanners in the same program with differing sets of defaults, and
 they play nicer with modern C and C++ compilers. The Flip side is
 that Flex no longer conforms to the POSIX lex behaviour, and the
 scanners require conforming implementations when flex is used in ANSI
 C mode. The package flex-old provides the older behaviour.
 .
 This product includes software developed by the University of California,
 Berkeley and its contributors. The upstream source code can be found at
 http://prdownloads.sourceforge.net/lex/flex-2.5.31.tar.bz2?download
 The project web page is at http://lex.sf.net/

Package: ibritish
Status: install ok installed
Priority: standard
Section: text
Installed-Size: 1232
Maintainer: David Coe <davidc@debian.org>
Architecture: powerpc
Source: ispell
Version: 3.1.20.0-4
Provides: ispell-dictionary
Depends: ispell, debconf, dictionaries-common (>= 0.20), debconf (>= 0.5) | debconf-2.0
Recommends: wbritish
Conflicts: ispell (<< 3.1.18-2)
Description: A British English dictionary for ispell
 This is the britishmed+ dictionary, as supplied with
 the source for ispell, with additional words added from
 the more comprehensive wbritish wordlist package.
 .
 This package also recommends wbritish because ispell's
 (L)ookup command needs a wordlist.

Package: mount
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 328
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: powerpc
Source: util-linux
Version: 2.12p-4sarge1
Pre-Depends: libblkid1 (>= 1.37-1), libc6 (>= 2.3.2.ds1-21), libuuid1
Description: Tools for mounting and manipulating filesystems
 This package provides the mount(8), umount(8), swapon(8),
 swapoff(8), and losetup(8) commands.

Package: powerpc-utils
Status: install ok installed
Priority: required
Section: base
Installed-Size: 172
Maintainer: Michael Schmitz <schmitz@biophys.uni-duesseldorf.de>
Version: 1.1.3-15
Replaces: pmac-utils, util-linux (<< 2.9w-3.1)
Depends: libc6 (>= 2.3.2.ds1-4)
Conflicts: pmac-utils, pmud-utils (<= 0.10-5)
Description: Various utilities for Linux/PowerPC
 Utilities for Linux on PowerPC hardware.
 .
 mousemode - tell an ADB mouse to use a given device handler ID.
 nvsetenv - change/view Open Firmware environment variables.
 nvsetvol - set Open Firmware stored volume setting.
 clock - Hardware clock program for Power Macs.
 trackpad - modify PowerBook trackpad behavior (tap/drag mode).
 fblevel - control LCD/TFT display backlight brightness.
 fnset - set PowerBook keyboard function keys mode.
 lsprop - list OF device tree in human readable format
 autoboot - set autoboot (server mode) flag on CUDA PowerMacs

Package: liblwres1
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 184
Maintainer: LaMont Jones <lamont@debian.org>
Source: bind9
Version: 1:9.2.4-1sarge2
Replaces: libbind0
Depends: libc6 (>= 2.3.2.ds1-21)
Conflicts: libbind0
Description: Lightweight Resolver Library used by BIND
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers the liblwres shared library used by BIND's daemons
 and clients.

Package: libtext-iconv-perl
Status: install ok installed
Priority: important
Section: text
Installed-Size: 100
Maintainer: Steve Haslam <araqnid@debian.org>
Architecture: powerpc
Version: 1.2-3
Depends: libc6 (>= 2.3.2.ds1-4), perl-base (>= 5.8.3-2), perlapi-5.8.3
Description: Convert between character sets in Perl
 The iconv() family of functions from XPG4 define an API for converting
 between character sets (e.g. UTF-8 to Latin1, EBCDIC to ASCII). They
 are provided by libc6
 .
 This package allows access to them from Perl via the Text::Iconv
 package.

Package: emacs21-nox
Status: purge ok not-installed
Priority: optional
Section: editors

Package: php5-xmlrpc
Status: purge ok not-installed
Priority: optional
Section: web

Package: php-pear
Status: purge ok not-installed
Priority: optional
Section: web

Package: libpq-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: libreadline4
Status: install ok installed
Priority: required
Section: base
Installed-Size: 372
Maintainer: Matthias Klose <doko@debian.org>
Source: readline4
Version: 4.3-11
Replaces: libreadline4-dev (<< 2.5a)
Depends: libc6 (>= 2.3.2.ds1-4), libncurses5 (>= 5.4-1)
Conflicts: libreadline4-dev (<< 2.5a)
Description: GNU readline and history libraries, run-time libraries
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: libreadline5
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 392
Maintainer: Matthias Klose <doko@debian.org>
Architecture: powerpc
Source: readline5
Version: 5.0-10
Depends: libc6 (>= 2.3.2.ds1-4), libncurses5 (>= 5.4-1)
Description: GNU readline and history libraries, run-time libraries
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.

Package: libncurses5
Status: install ok installed
Priority: required
Section: base
Installed-Size: 584
Maintainer: Daniel Jacobowitz <ncurses-maint@debian.org>
Source: ncurses
Version: 5.4-4
Depends: libc6 (>= 2.3.2.ds1-4)
Description: Shared libraries for terminal handling
 This package contains the shared libraries necessary to run programs
 compiled with ncurses.

Package: vim
Status: purge ok not-installed
Priority: optional
Section: editors

Package: portmap
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 140
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Version: 5-9
Replaces: netbase (<< 4.00)
Depends: libc6 (>= 2.3.2.ds1-4), libwrap0
Conffiles:
 /etc/default/portmap 16f47270facc4c7178b379abeb8facd9
 /etc/init.d/portmap 3425cead2d032ba2de3c57c9f646cc80
Description: The RPC portmapper
 Portmap is a server that converts RPC (Remote Procedure Call) program
 numbers into DARPA protocol port numbers.  It must be running in order
 to make RPC calls.
 .
 Services that use RPC include NFS and NIS.

Package: rsync
Status: purge ok not-installed
Priority: optional
Section: net

Package: mailx
Status: install ok installed
Priority: important
Section: mail
Installed-Size: 300
Maintainer: Robert Luberda <robert@debian.org>
Version: 1:8.1.2-0.20040524cvs-4
Provides: mail-reader
Depends: libc6 (>= 2.3.2.ds1-4), liblockfile1 (>= 1.0), exim4 | mail-transport-agent, base-files (>= 2.2.0)
Conflicts: suidmanager (<< 0.52)
Conffiles:
 /etc/mail.rc 2bd8160a85f53c20e55ebd375fc89431
Description: A simple mail user agent
 mailx is the traditional command-line-mode mail user agent.
 Even if you don't use it it may be required by other programs.

Package: bcrelay
Status: purge ok not-installed
Priority: optional
Section: net

Package: ppp
Status: install ok installed
Priority: optional
Section: base
Installed-Size: 1100
Maintainer: Marco d'Itri <md@linux.it>
Architecture: powerpc
Version: 2.4.3-20050321+2sarge1
Replaces: ppp-pam, ppp-udeb
Depends: libc6 (>= 2.3.2.ds1-21), libpam0g (>= 0.76), libpcap0.7, zlib1g (>= 1:1.2.1), libpam-modules, libpam-runtime (>= 0.76-13.1), netbase, procps, makedev (>= 2.3.1-56)
Suggests: libatm1
Conflicts: ppp-pam, ppp-udeb, pppdcapiplugin (<= 1:3.2pre3-4)
Conffiles:
 /etc/bash_completion.d/pon f97bd66de7ec9317f738071d1f778e89
 /etc/apm/event.d/ppp c894b205a1638f6fbb7bb477c8d253b6
 /etc/ppp/ip-up.d/0000usepeerdns 47b1eee2bd4e9e492ad5a9f5870ca272
 /etc/ppp/ip-down.d/0000usepeerdns 71822da78b9163dfbcb6f1bbd662b9b6
 /etc/ppp/options 05bc845e4e5e6b3645666418237ad489
 /etc/ppp/ip-up 716e44060af21bc4e154dd9e7a66b4d7
 /etc/ppp/ip-down ac5b64705ae2ab12679df536a734019c
 /etc/ppp/ipv6-up f1e1926742a97d971ecb258a7f4c29da
 /etc/ppp/ipv6-down dc175d5a53eac99192f2190fe96d2db3
 /etc/chatscripts/pap 17dbbede1dc894aa6c6c4e8be5727c1d
 /etc/logrotate.d/ppp 8434ebaff1b3b33bb0ea0bce523adfd3
 /etc/init.d/pppd-dns 66f683faf51d4956ddd7b3f0a8dbe259
 /etc/init.d/ppp f38e78b2d741c796650d4d4e99a30797
 /etc/pam.d/ppp cc163be3dbe4258e639238ccd5bcdea0
Description: Point-to-Point Protocol (PPP) daemon
 The Point-to-Point Protocol (PPP) provides a standard way to transmit
 datagrams over a serial link, as well as a standard way for the machines
 at either end of the link (the "peers") to negotiate various optional
 characteristics of the link.  Using PPP, a serial link can be used to
 transmit Internet Protocol (IP) datagrams, allowing TCP/IP connections
 between the peers.

Package: dia-gnome
Status: purge ok not-installed
Priority: optional
Section: gnome

Package: unicon-imc2
Status: purge ok not-installed
Priority: optional
Section: utils

Package: libapache-mod-jk-doc
Status: purge ok not-installed
Priority: optional
Section: doc

Package: evolution-dev
Status: purge ok not-installed
Priority: optional
Section: devel

Package: libclamav2
Status: purge ok not-installed
Priority: optional
Section: libs

Package: parted
Status: purge ok not-installed
Priority: optional
Section: admin

Package: logrotate
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 156
Maintainer: Paul Martin <pm@debian.org>
Version: 3.7-5
Depends: libc6 (>= 2.3.2.ds1-21), libpopt0 (>= 1.7), cron (>= 3.0pl1-53) | anacron | fcron, base-passwd (>= 2.0.3.4)
Recommends: mailx
Conffiles:
 /etc/logrotate.conf 52a69079dac7bbc0ee80876d14dbf6a8
 /etc/cron.daily/logrotate d2281ecb6f898b446ac8a5984ab5a243
Description: Log rotation utility
 The logrotate utility is designed to simplify the administration of
 log files on a system which generates a lot of log files.  Logrotate
 allows for the automatic rotation compression, removal and mailing of
 log files.  Logrotate can be set to handle a log file daily, weekly,
 monthly or when the log file gets to a certain size.  Normally, logrotate
 runs as a daily cron job.

Package: php5-recode
Status: purge ok not-installed
Priority: optional
Section: web

Package: samba-dbg
Status: purge ok not-installed
Priority: extra
Section: devel

Package: centericq-fribidi
Status: purge ok not-installed
Priority: optional
Section: net

Package: isdnutils-base
Status: purge ok not-installed
Priority: optional
Section: utils

Package: smbfs
Status: install ok not-installed
Priority: optional
Section: otherosfs

Package: php5-curl
Status: purge ok not-installed
Priority: optional
Section: web

Package: hyperestraier
Status: purge ok not-installed
Priority: optional
Section: text

Package: iproute
Status: purge ok not-installed
Priority: extra
Section: net

Package: lpr
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 408
Maintainer: Adam Majer <adamm@galacticasoftware.com>
Version: 1:2003.09.23-7
Depends: libc6 (>= 2.3.2.ds1-4), netbase
Suggests: magicfilter | apsfilter, gs
Conflicts: suidmanager (<< 0.50)
Conffiles:
 /etc/default/lpd 9b883786cf372c34999ff8e9ac0efd70
 /etc/init.d/lpd c5b227d3fd760d1201fcd265a01c4237
 /etc/cron.weekly/lpr ae77424ec8f490516e3e7d8f3aaaae25
Description: BSD lpr/lpd line printer spooling system
 This is the BSD printer spooler and associated utilities.
 You can use this for local and remote printers.
 .
 If you install magicfilter or apsfilter (along with ghostscript),
 lpr will be able to automatically handle special file types
 (such as Postscript and PDF files).

Package: libgadu-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: clamav-testfiles
Status: purge ok not-installed
Priority: optional
Section: utils

Package: openoffice.org-l10n-be-by
Status: purge ok not-installed
Priority: optional
Section: editors

Package: python-samba
Status: purge ok not-installed
Priority: optional
Section: python

Package: patch
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 192
Maintainer: Michael Fedrowitz <michaelf@debian.org>
Version: 2.5.9-2
Depends: libc6 (>= 2.3.2.ds1-4)
Suggests: ed
Description: Apply a diff file to an original
 Patch will take a patch file containing any of the four forms
 of difference listing produced by the diff program and apply
 those differences to an original file, producing a patched
 version.

Package: fireflier-client-gtk
Status: purge ok not-installed
Priority: optional
Section: net

Package: icedove-inspector
Status: purge ok not-installed
Priority: optional
Section: mail

Package: openoffice.org-core
Status: purge ok not-installed
Priority: optional
Section: editors

Package: libapache-mod-php4
Status: purge ok not-installed
Priority: optional
Section: net

Package: libapache-mod-php5
Status: purge ok not-installed
Priority: optional
Section: net

Package: ethereal
Status: purge ok not-installed
Priority: optional
Section: net

Package: openoffice.org-draw
Status: purge ok not-installed
Priority: optional
Section: editors

Package: clamav-docs
Status: purge ok not-installed
Priority: optional
Section: utils

Package: iceape-calendar
Status: purge ok not-installed
Priority: optional
Section: misc

Package: mozilla-js-debugger
Status: purge ok not-installed
Priority: optional
Section: devel

Package: xulrunner-gnome-support
Status: purge ok not-installed
Priority: optional
Section: devel

Package: php4-cgi
Status: purge ok not-installed
Priority: optional
Section: web

Package: libattr1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 76
Maintainer: Nathan Scott <nathans@debian.org>
Source: attr
Version: 2.4.16-1
Depends: libc6 (>= 2.3.2.ds1-4)
Conflicts: attr (<< 2.0.0)
Description: Extended attribute shared library
 Contains the runtime environment required by programs that make use
 of extended attributes.

Package: textutils
Status: install ok installed
Priority: required
Section: base
Installed-Size: 16
Maintainer: Michael Stone <mstone@debian.org>
Architecture: all
Source: coreutils
Version: 5.2.1-2
Pre-Depends: coreutils
Description: The GNU text file processing utilities (transitional package)
 Empty package to facilitate upgrades, can be safely removed.

Package: php4-dev
Status: purge ok not-installed
Priority: optional
Section: devel

Package: lighttpd
Status: purge ok not-installed
Priority: optional
Section: web

Package: bcfg2
Status: purge ok not-installed
Priority: optional
Section: admin

Package: libnss3-0d-dbg
Status: purge ok not-installed
Priority: extra
Section: libdevel

Package: libparted1.4
Status: purge ok not-installed
Priority: optional
Section: libs

Package: libpcap0.7
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 200
Maintainer: Romain Francoise <rfrancoise@debian.org>
Architecture: powerpc
Source: libpcap
Version: 0.7.2-7
Depends: libc6 (>= 2.3.2.ds1-4)
Description: System interface for user-level packet capture
 libpcap (Packet CAPture) provides a portable framework for low-level
 network monitoring.  Applications include network statistics collection,
 security monitoring, network debugging, etc.
 .
 Since almost every system vendor provides a different interface for
 packet capture, and since there are several tools that require this
 functionality, we've created this system-independent API to ease in
 porting and to alleviate the need for several system-dependent packet
 capture modules in each application.
 .
 Further information is available at <URL: http://www.tcpdump.org/>

Package: libecpg-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: openoffice.org-help-ru
Status: purge ok not-installed
Priority: optional
Section: doc

Package: sed
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 836
Maintainer: Clint Adams <schizo@debian.org>
Version: 4.1.2-8
Replaces: ssed (<< 3.59)
Pre-Depends: libc6 (>= 2.3.2.ds1-4)
Description: The GNU sed stream editor
 sed reads the specified files or the standard input if no
 files are specified, makes editing changes according to a
 list of commands, and writes the results to the standard
 output.

Package: openoffice.org-l10n-ja
Status: purge ok not-installed
Priority: optional
Section: editors

Package: libperl5.6
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 1056
Maintainer: Brendan O'Dea <bod@debian.org>
Source: perl
Version: 5.6.1-7
Depends: libc6 (>= 2.2.4-4)
Suggests: perl-base (= 5.6.1-7)
Description: Shared Perl library.
 Provides a shared library for programs which embed a Perl
 interpreter.  This includes the /usr/bin/perl binary on architectures other
 than i386 (where there is a measured performance hit when perl is
 dynamically linked).

Package: fireflier-client-qt
Status: purge ok not-installed
Priority: optional
Section: net

Package: clamav-freshclam
Status: purge ok not-installed
Priority: optional
Section: utils

Package: openoffice.org-help-fr
Status: purge ok not-installed
Priority: optional
Section: doc

Package: liblzo1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 172
Maintainer: Paolo Molaro <lupus@debian.org>
Architecture: powerpc
Source: lzo
Version: 1.08-1.2
Depends: libc6 (>= 2.3.2.ds1-4)
Conflicts: lzop (<= 1.00)
Description: A real-time data compression library
 LZO is a portable lossless data compression library written in
 ANSI C. It offers pretty fast compression and *very* fast
 decompression. Decompression requires no memory.
 In addition there are slower compression levels achieving a
 quite competitive compression ratio while still decompressing
 at this very high speed.

Package: setserial
Status: install ok installed
Priority: important
Section: base
Installed-Size: 180
Maintainer: Ola Lundqvist <opal@debian.org>
Version: 2.17-40
Depends: libc6 (>= 2.3.2.ds1-4), debconf (>= 0.2.17)
Conffiles:
 /etc/init.d/setserial 7156df096e7822b22c7e0b48db4da662
 /etc/init.d/etc-setserial 2c9d7243ff80929e0884f8ea4b433073
 /etc/modutils/setserial cb23d25565eae64f12ef267efd3f42c3
Description: Controls configuration of serial ports
 Set and/or report the configuration information associated with
 a serial port. This information includes what I/O port and which IRQ
 a particular serial port is using.
 .
 This version has a completely new approach to configuration, so if you
 have a setup other than the standard ttyS0 and 1, you will have to get
 your hands dirty.
 .
 By default, only COM1-4 are configured by the kernel, using IRQ 3 and 4.
 If you have other serial ports (such as an AST Fourport card), or
 if you have mapped the IRQs differently (perhaps COM3 and 4 to other
 IRQs to allow concurrent access with COM1 and 2) then you must have this
 package.

Package: openoffice.org-help-hu
Status: purge ok not-installed
Priority: optional
Section: doc

Package: lynx
Status: install ok installed
Priority: standard
Section: web
Installed-Size: 4596
Maintainer: James Troup <james@nocrew.org>
Architecture: powerpc
Version: 2.8.5-2sarge2
Replaces: lynx-ssl
Provides: www-browser, news-reader, lynx-ssl
Depends: libbz2-1.0, libc6 (>= 2.3.2.ds1-21), libgnutls11 (>= 1.0.16), libncursesw5 (>= 5.4-1), zlib1g (>= 1:1.2.1)
Recommends: mime-support
Conflicts: lynx-ssl
Conffiles:
 /etc/lynx.cfg b15e2a083dd7b2103e7c54f5924575fb
Description: Text-mode WWW Browser
 Lynx is a fully-featured World Wide Web (WWW) client for users
 running cursor-addressable, character-cell display devices (e.g.,
 vt100 terminals, vt100 emulators running on PCs or Macs, or any other
 "curses-oriented" display). It will display hypertext markup language
 (HTML) documents containing links to files residing on the local
 system, as well as files residing on remote systems running Gopher,
 HTTP, FTP, WAIS, and NNTP servers.

Package: openoffice.org-gtk
Status: purge ok not-installed
Priority: optional
Section: gnome

Package: bpalogin
Status: purge ok not-installed
Priority: extra
Section: net

Package: krb5-rsh-server
Status: purge ok not-installed
Priority: optional
Section: net

Package: g++
Status: install ok installed
Priority: standard
Section: devel
Installed-Size: 40
Maintainer: Debian GCC maintainers <debian-gcc@lists.debian.org>
Architecture: powerpc
Source: gcc-defaults (1.21)
Version: 4:3.3.5-3
Provides: c++-compiler
Depends: cpp (>= 4:3.3.5-3), gcc (>= 4:3.3.5-3), g++-3.3 (>= 1:3.3.5-1), gcc-3.3 (>= 1:3.3.5-1)
Description: The GNU C++ compiler
 This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.
 .
 This is a dependency package providing the default GNU C++ compiler.

Package: e2fslibs
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 212
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: powerpc
Source: e2fsprogs
Version: 1.37-2sarge1
Replaces: e2fsprogs (<< 1.34-1)
Provides: libext2fs2, libe2p2
Depends: libc6 (>= 2.3.2.ds1-21)
Description: ext2 filesystem libraries
 The ext2fs and e2p libraries are used by programs that directly access
 EXT2 filesystems from usermode programs.   The EXT2 filesystem is very often
 used as the default filesystem on Linux systems.   Various system programs
 that use libext2fs include e2fsck, mke2fs, tune2fs, etc.  Programs that use
 libe2p include dumpe2fs, chattr, and lsattr.

Package: thunderbird
Status: purge ok not-installed
Priority: optional
Section: mail

Package: xulrunner
Status: purge ok not-installed
Priority: optional
Section: devel

Package: dictionaries-common
Status: install ok installed
Priority: standard
Section: text
Installed-Size: 563
Maintainer: Agustin Martin Domingo <agmartin@debian.org>
Architecture: all
Version: 0.25.12
Replaces: openoffice.org-updatedicts
Provides: openoffice.org-updatedicts
Depends: perl (>= 5.6.0-16), debconf (>= 0.5)
Suggests: ispell, emacsen-common, jed-extra
Conflicts: ispell (<= 3.1.20.0-1), miscfiles (<< 1.3-2.1), iamerican (<= 3.1.20.0-1), ibrazilian (<< 2.4-5.1), ibritish (<= 3.1.20.0-1), ibulgarian (<= 2.0-2), icatalan (<= 0.1-4), iczech (<= 20020628-1), idanish (<< 1.4.22-2.1), idutch (<= 1:0.1e-20), iesperanto (<< 2.1.2000.02.25-6), ifaroese (<= 0.1.16-2), ifinnish (<< 0.7-3.4), ifinnish-large (<< 0.7-3.4), ifinnish-small (<< 0.7-3.4), ifrench (<= 1.4-13), ifrench-gut (<= 1:1.0-9), igerman, ihungarian (<= 0.84-1), iitalian (<< 2.20-1.2), ingerman (<< 20010414-2), inorwegian (<< 2.0-6.1), ipolish (<< 20011004-2.1), iportuguese (<< 19980611-8), irussian (<= 0.99f0-1), ispanish (<< 1.7-5), ispell-ga, iswedish (<= 1.4.2), wbritish (<= 3.1.20.0-1), wbulgarian (<= 2.0-2), wcatalan (<= 0.1-4), wdanish (<< 1.4.22-2.1), wdutch (<= 1:0.1e-20), wenglish (<= 2.0-2), wfaroese (<= 0.1.16-2), wfinnish (<< 0.7-3.4), wfrench (<= 1.0-11), wgerman, witalian (<= 1.6), wnorwegian (<< 2.0-6.1), wngerman (<< 20010414-2), wpolish (<< 20011004-2.1), wspanish (<= 1.0.11.1), wswedish (<= 1.4.2), openoffice.org-updatedicts
Conffiles:
 /etc/emacs/site-start.d/50dictionaries-common.el ee3b585c40541f9f95008b7d412754d1
Description: Common utilities for spelling dictionary tools
 These are utilities shared by all ispell, myspell and wordlist
 dictionaries,  including support for some tools that use ispell
 (like emacsen, jed and mutt). More info about naming conventions and
 availability of those dictionaries in the README file.
 .
 Maintainers should install dictionaries-common-dev as well, and read its
 documentation.

Package: gimp-dbg
Status: purge ok not-installed
Priority: extra
Section: graphics

Package: evolution-dbg
Status: purge ok not-installed
Priority: extra
Section: gnome

Package: host
Status: purge ok not-installed
Priority: extra
Section: net

Package: samba-common
Status: install ok not-installed
Priority: optional
Section: net

Package: openoffice.org-dev-doc
Status: purge ok not-installed
Priority: optional
Section: doc

Package: lighttpd-mod-magnet
Status: purge ok not-installed
Priority: optional
Section: web

Package: base-passwd
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 136
Maintainer: Colin Watson <cjwatson@debian.org>
Version: 3.5.9
Replaces: base
Depends: libc6 (>= 2.3.2.ds1-4)
Description: Debian base system master password and group files
 These are the canonical master copies of the user database files
 (/etc/passwd and /etc/group), containing the Debian-allocated user and
 group IDs. The update-passwd tool is provided to keep the system databases
 synchronized with these master files.

Package: linux-headers-2.6.18-4-vserver-powerpc64
Status: purge ok not-installed
Priority: optional
Section: devel

Package: at
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 204
Maintainer: Ryan Murray <rmurray@debian.org>
Version: 3.1.8-11
Depends: libc6 (>= 2.2.4-4), mail-transport-agent
Conffiles:
 /etc/at.deny 8cb7e7632119dc26115436938efd2522
 /etc/init.d/atd 02b656c0a615d92f438ed69a08787122
Description: Delayed job execution and batch processing
 At and batch read shell commands from standard input
 storing them as a job to be scheduled for execution in the
 future.
 .
 Use
  at    to run the job at a specified time
  batch to run the job when system load levels permit

Package: ipchains
Status: install ok installed
Priority: important
Section: base
Installed-Size: 216
Maintainer: Lenart Janos <ocsi@debian.org>
Version: 1.3.10-15
Replaces: netbase (<< 4.00)
Depends: libc6 (>= 2.2.4-4), debconf
Suggests: doc-linux-html | doc-linux-text
Description: Network firewalling for Linux 2.2.x
 This package allows you to control how programs on your system may access
 the network, and how programs on other systems may access yours via the
 network.
 .
 This package fully replaces ipfwadm by wrapping it for old fashioned
 users and for old scripts.
 .
 Firewalling HOWTO can be found in doc-linux-* package.
 .
 Linux ipchains is a rewrite of the Linux IPv4 firewalling code (which
 was mainly stolen from BSD) and a rewrite of ipfwadm, which was a
 rewrite of BSD's ipfw, I believe.  It is required to administer the IP
 packet filters in Linux kernel versions 2.1.102 and above.

Package: qt4-doc
Status: purge ok not-installed
Priority: optional
Section: doc

Package: openoffice.org-filter-mobiledev
Status: purge ok not-installed
Priority: optional
Section: misc

Package: iceweasel
Status: purge ok not-installed
Priority: optional
Section: web

Package: libxul0d
Status: purge ok not-installed
Priority: optional
Section: libs

Package: nfs-kernel-server
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 280
Maintainer: Chip Salzenberg <chip@debian.org>
Source: nfs-utils
Version: 1:1.0.6-3.1
Replaces: knfs, nfs-server
Provides: knfs, nfs-server
Depends: nfs-common (>= 1:0.3.3-3), debconf (>= 1.0), sysvinit (>= 2.80-1), libc6 (>= 2.3.2.ds1-4), libwrap0
Conflicts: knfs, nfs-server
Conffiles:
 /etc/exports fa071681b8e7f4eff1d6f5c4f43bf1d8
 /etc/default/nfs-kernel-server 226f8fdd37b11c59d73e2f378e22b0d0
 /etc/init.d/nfs-kernel-server b7740fdb44dc4f563ff56a3f7bddce0c
Description: Kernel NFS server support
 Use this package if you have a fairly recent kernel (2.2.13 or better)
 and you want to use the kernel-mode NFS server.  The user-mode NFS
 server in the "nfs-user-server" package is slower but more featureful
 and easier to debug than the kernel-mode server.
 .
 Upstream: SourceForge project "nfs", CVS module nfs-utils.

Package: libcomerr2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 80
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: powerpc
Source: e2fsprogs
Version: 1.37-2sarge1
Replaces: e2fsprogs (<< 1.34-1)
Provides: libcomerr-kth-compat
Depends: libc6 (>= 2.3.2.ds1-21)
Description: common error description library
 libcomerr is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.

Package: mawk
Status: install ok installed
Priority: required
Section: base
Installed-Size: 236
Maintainer: James Troup <james@nocrew.org>
Version: 1.3.3-11
Provides: awk
Pre-Depends: libc6 (>= 2.3.1-1)
Description: a pattern scanning and text processing language
 Mawk is an interpreter for the AWK Programming Language. The AWK
 language is useful for manipulation of data files, text retrieval and
 processing, and for prototyping and experimenting with algorithms. Mawk
 is a new awk meaning it implements the AWK language as defined in Aho,
 Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley
 Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms
 to the POSIX 1003.2 (draft 11.3) definition of the AWK language
 which contains a few features not described in the AWK book, and mawk
 provides a small number of extensions.
 .
 Mawk is smaller and much faster than gawk. It has some compile-time
 limits such as NF = 32767 and sprintf buffer = 1020.

Package: libedataserverui1.2-6
Status: purge ok not-installed
Priority: optional
Section: libs

Package: php4-domxml
Status: purge ok not-installed
Priority: optional
Section: web

Package: libdns5
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 1176
Maintainer: Bdale Garbee <bdale@gag.com>
Source: bind9
Version: 1:9.2.1-2.woody.1
Replaces: libbind0
Depends: libc6 (>= 2.2.4-4)
Conflicts: libbind0
Description: DNS Shared Library used by BIND
 Delivers the libdns shared library used by BIND's daemons and clients.

Package: fireflier-client-kde
Status: purge ok not-installed
Priority: optional
Section: net

Package: clamav-base
Status: purge ok not-installed
Priority: optional
Section: utils

Package: mozilla-psm
Status: purge ok not-installed
Priority: optional
Section: web

Package: php4-common
Status: purge ok not-installed
Priority: optional
Section: web

Package: linux-image-2.6.18-4-vserver-powerpc64
Status: purge ok not-installed
Priority: optional
Section: admin

Package: groff-base
Status: install ok installed
Priority: important
Section: text
Installed-Size: 2568
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: powerpc
Source: groff
Version: 1.18.1.1-7
Replaces: groff (<< 1.17.2-17), jgroff (<< 1.17-1)
Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.4.1-3), libstdc++5 (>= 1:3.3.4-1)
Suggests: groff
Conflicts: groff (<< 1.17-1), jgroff (<< 1.17-1), pmake (<< 1.45-7), troffcvt (<< 1.04-14)
Conffiles:
 /etc/groff/man.local f2c6e1f0ab35c26505d35e3abbda7606
 /etc/groff/mdoc.local ff5789529422421c5e5128f22c248e0c
Description: GNU troff text-formatting system (base system components)
 This package contains the traditional UN*X text formatting tools
 troff, nroff, tbl, eqn, and pic. These utilities, together with the
 man-db package, are essential for displaying the on-line manual pages.
 .
 groff-base is a stripped-down package containing the necessary components
 to read manual pages in ASCII, Latin-1, and UTF-8, plus the PostScript
 device (groff's default). Users who want a full groff installation, with
 the standard set of devices, fonts, macros, and documentation, should
 install the groff package.

Package: ntp
Status: purge ok not-installed
Priority: optional
Section: net

Package: thunderbird-gnome-support
Status: purge ok not-installed
Priority: optional
Section: mail

Package: gnupg
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 4784
Maintainer: James Troup <james@nocrew.org>
Architecture: powerpc
Version: 1.4.1-1.sarge7
Replaces: gpg-rsa, gpg-rsaref
Provides: gpg-rsa, gpg-rsaref
Depends: libbz2-1.0, libc6 (>= 2.3.2.ds1-21), libldap2 (>= 2.1.17-1), libreadline5, libusb-0.1-4 (>= 2:0.1.10a), zlib1g (>= 1:1.2.1), makedev (>= 2.3.1-13) | devfsd | hurd
Suggests: gnupg-doc, xloadimage
Conflicts: gpg-rsa, gpg-rsaref, suidmanager (<< 0.50), gpg-idea (<= 2.2)
Description: GNU privacy guard - a free PGP replacement
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC2440.
 .
 GnuPG does not use any patented algorithms so it cannot be compatible
 with PGP2 because it uses IDEA (which is patented worldwide).

Package: libnewt0.51
Status: install ok installed
Priority: standard
Section: base
Installed-Size: 652
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Source: newt
Version: 0.51.6-20
Replaces: libnewt-utf8, libnewt0
Depends: libc6 (>= 2.3.2.ds1-4), slang1a-utf8 (>> 1.4.9dbs-4)
Description: Not Erik's Windowing Toolkit - text mode windowing with slang
 Newt is a windowing toolkit for text mode built from the slang library.
 It allows color text mode applications to easily use stackable windows,
 push buttons, check boxes, radio buttons, lists, entry fields, labels,
 and displayable text. Scrollbars are supported, and forms may be nested
 to provide extra functionality. This package contains the shared library
 for programs that have been built with newt.

Package: libdb4.2
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 940
Maintainer: Debian Berkeley DB Maintainers <pkg-db-devel@lists.alioth.debian.org>
Source: db4.2
Version: 4.2.52-18
Depends: libc6 (>= 2.3.2.ds1-4)
Conflicts: libdb2 (<< 2:2.7.7-3)
Description: Berkeley v4.2 Database Libraries [runtime]
 This is the runtime package for programs that use the v4.2 Berkeley
 database library.

Package: libdb4.1
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 860
Maintainer: Debian Berkeley DB Maintainers <pkg-db-devel@lists.alioth.debian.org>
Architecture: powerpc
Source: db4.1
Version: 4.1.25-18
Depends: libc6 (>= 2.3.2.ds1-4)
Conflicts: libdb2 (<< 2:2.7.7-3)
Description: Berkeley v4.1 Database Libraries [runtime]
 This is the runtime package for programs that use the v4.1 Berkeley
 database library.

Package: emacs21-el
Status: purge ok not-installed
Priority: optional
Section: editors

Package: libisccfg0
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 188
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: powerpc
Source: bind9
Version: 1:9.2.4-1sarge2
Replaces: libbind0
Depends: libc6 (>= 2.3.2.ds1-21), libdns16, libisc7, libisccc0
Conflicts: libbind0
Description: Config File Handling Library used by BIND
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers the libisccfg shared library used by BIND's daemons
 and clients to read and write ISC-style configuration files like named.conf
 and rndc.conf.

Package: php5-snmp
Status: purge ok not-installed
Priority: optional
Section: web

Package: libestraier-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: net-tools
Status: install ok installed
Priority: important
Section: net
Installed-Size: 780
Maintainer: Bernd Eckenfels <ecki@debian.org>
Version: 1.60-10
Replaces: netbase (<< 4.00)
Depends: libc6 (>= 2.3.2.ds1-4)
Description: The NET-3 networking toolkit
 This package includes the important tools for controlling the network
 subsystem of the Linux kernel.  This includes arp, ifconfig, netstat,
 rarp, nameif and route.  Additionally, this package contains utilities
 relating to particular network hardware types (plipconfig, slattach,
 mii-tool) and advanced aspects of IP configuration (iptunnel, ipmaddr).
 .
 In the upstream package 'hostname' and friends are included. Those are
 not installed by this package, since there is a special "hostname*.deb".

Package: libegroupwise1.2-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: libstdc++2.10-glibc2.2
Status: install ok installed
Priority: required
Section: base
Installed-Size: 396
Maintainer: Debian GCC maintainers <debian-gcc@lists.debian.org>
Source: gcc-2.95 (2.95.4.ds15-22)
Version: 1:2.95.4-22
Depends: libc6 (>= 2.3.2.ds1-4)
Description: The GNU stdc++ library
 NOTE: This is not a final release, but taken from the CVS gcc-2_95-branch
 (dated 2001-10-02).
 .
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.

Package: libsmjs1
Status: purge ok not-installed
Priority: optional
Section: libs

Package: wireshark-dev
Status: purge ok not-installed
Priority: optional
Section: devel

Package: pppoe
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 204
Maintainer: Christian Hudon <chrish@debian.org>
Source: rp-pppoe
Version: 3.5-4
Depends: libc6 (>= 2.3.2.ds1-4), ppp (>= 2.3.10-1)
Conffiles:
 /etc/ppp/peers/dsl-provider 0bcef4498f82a97ed848067ab05b5238
 /etc/ppp/ppp_on_boot.dsl e9a32a4080414799e238df522207f78b
Description: PPP over Ethernet driver
 PPP over Ethernet (PPPoE) is a protocol used by
 many ADSL Internet service providers. This package allows
 you to connect to those PPPoE service providers.

Package: debconf-i18n
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 688
Maintainer: Joey Hess <joeyh@debian.org>
Architecture: all
Source: debconf
Version: 1.4.30.13
Replaces: debconf (<< 1.3.0), debconf-utils (<< 1.3.22)
Depends: debconf, liblocale-gettext-perl, libtext-iconv-perl, libtext-wrapi18n-perl, libtext-charwidth-perl
Conflicts: debconf-english, debconf-utils (<< 1.3.22)
Description: full internationalization support for debconf
 This package provides full internationalization for debconf, including
 translations into all available languages, support for using translated
 debconf templates, and support for proper display of multibyte character
 sets.

Package: grep
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 668
Maintainer: Ryan M. Golbeck <rmgolbeck@debian.org>
Version: 2.5.1.ds1-4
Provides: rgrep
Pre-Depends: libc6 (>= 2.3.2.ds1-4)
Conflicts: rgrep
Description: GNU grep, egrep and fgrep
 'grep' is a utility to search for text in files; it can be used from the
 command line or in scripts.  Even if you don't want to use it, other packages
 on your system probably will.
 .
 The GNU family of grep utilities may be the "fastest grep in the west".
 GNU grep is based on a fast lazy-state deterministic matcher (about
 twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
 search for a fixed string that eliminates impossible text from being
 considered by the full regexp matcher without necessarily having to
 look at every character. The result is typically many times faster
 than Unix grep or egrep. (Regular expressions containing backreferencing
 will run more slowly, however.)

Package: linux-kernel-headers
Status: install ok installed
Priority: standard
Section: devel
Installed-Size: 7132
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Version: 2.5.999-test7-bk-17
Replaces: libc6-dev (<< 2.3.2.ds1-6), libc6.1-dev (<< 2.3.2.ds1-6), dvb-dev (<< 1.0.1-6)
Conflicts: libc6-dev (<< 2.3.2.ds1-6), libc6.1-dev (<< 2.3.2.ds1-6), dvb-dev (<< 1.0.1-6)
Description: Linux Kernel Headers for development
 This package provides headers from the Linux kernel.  These headers
 are used by the installed headers for GNU glibc and other system libraries.

Package: openoffice.org-l10n-mk
Status: purge ok not-installed
Priority: optional
Section: editors

Package: libedataserver1.2-7
Status: purge ok not-installed
Priority: optional
Section: libs

Package: emacs21
Status: purge ok not-installed
Priority: optional
Section: editors

Package: php5-sybase
Status: purge ok not-installed
Priority: optional
Section: web

Package: racoon
Status: purge ok not-installed
Priority: extra
Section: net

Package: smbclient
Status: install ok not-installed
Priority: optional
Section: net

Package: libqt4-debug
Status: purge ok not-installed
Priority: optional
Section: libs

Package: linux-headers-2.6.18-4
Status: purge ok not-installed
Priority: optional
Section: devel

Package: libcurl3
Status: purge ok not-installed
Priority: optional
Section: libs

Package: krb5-clients
Status: purge ok not-installed
Priority: optional
Section: net

Package: php5-common
Status: install ok not-installed
Priority: optional
Section: web

Package: linux-headers-2.6.18-4-powerpc-smp
Status: purge ok not-installed
Priority: optional
Section: devel

Package: libgadu3
Status: purge ok not-installed
Priority: optional
Section: libs

Package: blender
Status: purge ok not-installed
Priority: optional
Section: graphics

Package: ftp
Status: install ok installed
Priority: standard
Section: base
Installed-Size: 168
Maintainer: Robert Millan <rmh@debian.org>
Source: netkit-ftp
Version: 0.17-12
Replaces: netstd
Depends: libc6 (>= 2.3.2.ds1-4), libncurses5 (>= 5.4-1), libreadline4 (>= 4.3-1)
Description: The FTP client.
 ftp is the user interface to the ARPANET standard File Transfer Protocol.
 The program allows a user to transfer files to and from a remote network
 site.

Package: ethereal-common
Status: purge ok not-installed
Priority: optional
Section: net

Package: passwd
Status: install ok installed
Priority: required
Section: base
Installed-Size: 1828
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Source: shadow
Version: 1:4.0.3-31sarge9
Replaces: manpages (<= 1.15-2), manpages-de (<= 0.4-4), manpages-fr, manpages-hu, manpages-it, manpages-ja, manpages-ko, manpages-pl (<= 20020406-1)
Depends: libc6 (>= 2.3.2.ds1-21), libpam0g (>= 0.76), login (>= 970502-1), libpam-modules (>= 0.72-5)
Conflicts: shadow-passwd, pam-apps, suidregister (<< 0.50), debconf (<< 0.5)
Conffiles:
 /etc/pam.d/chfn 264d111e77be5d90f0fe55addfcc29a9
 /etc/pam.d/chsh a5a92a6bace997a3ca6c34eaafa0dabd
 /etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63
Description: change and administer password and group data
 This package includes passwd, chsh, chfn, and many other programs to
 maintain password and group data.
 .
 Shadow passwords are supported.  See /usr/share/doc/passwd/README.Debian

Package: bsdmainutils
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 624
Maintainer: Graham Wilson <graham@debian.org>
Version: 6.0.17
Replaces: bsdutils (<< 3.0-0)
Depends: libc6 (>= 2.3.2.ds1-4), libncurses5 (>= 5.4-1), debconf (>= 0.5) | debconf-2.0, bsdutils (>= 3.0-0), debianutils (>= 1.8)
Suggests: cpp, wenglish | wordlist, whois, vacation
Conflicts: textutils (<< 2.0-1), suidmanager (<< 0.50)
Conffiles:
 /etc/calendar/default f499e79b0d2d685aa5ae7e1013940b96
 /etc/cron.daily/bsdmainutils f58739ed756eb2efa7b73f377976a5e4
Description: collection of more utilities from FreeBSD
 This package contains lots of small programs many people expect to find
 when they use a BSD-style Unix system.
 .
 Included are: banner, ncal, cal, calendar, col, colcrt, colrm, column, from,
 hexdump, look, lorder, ul, write.
 .
 This package used to contain whois and vacation, which are now distributed
 in their own packages. Also here was tsort, which is now in the "coreutils"
 package.

Package: util-linux-locales
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 3032
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: all
Source: util-linux
Version: 2.12p-4sarge1
Replaces: util-linux (<< 2.11b)
Depends: util-linux (>= 2.12p-0), util-linux (<< 2.12p.0-0)
Description: Locales files for util-linux
 This package contains the internationalization files of for the util-linux
 package.
 .
 They are needed when you want the programs in util-linux to print their
 messages in other languages than English.

Package: hostname
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 76
Maintainer: Graham Wilson <graham@debian.org>
Version: 2.13
Pre-Depends: libc6 (>= 2.3.2.ds1-4)
Description: A utility to set/show the host name or domain name
 The hostname command can be used to either set or display
 the current host or domain name of the system. This name is
 used by many of the networking programs to identify the machine.
 The domain name is also used by NIS/YP.

Package: openoffice.org-l10n-en-gb
Status: purge ok not-installed
Priority: optional
Section: editors

Package: g++-2.95
Status: purge ok not-installed
Priority: standard
Section: devel

Package: thttpd
Status: purge ok not-installed
Priority: optional
Section: web

Package: postgresql-doc-7.4
Status: purge ok not-installed
Priority: optional
Section: doc

Package: vlc-nox
Status: purge ok not-installed
Priority: optional
Section: net

Package: libacl1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 88
Maintainer: Nathan Scott <nathans@debian.org>
Source: acl
Version: 2.2.23-1
Depends: libattr1 (>= 2.4.4-1), libc6 (>= 2.3.2.ds1-4)
Conflicts: acl (<< 2.0.0), libacl1-kerberos4kth
Description: Access control list shared library
 This package contains the libacl.so dynamic library containing
 the POSIX 1003.1e draft standard 17 functions for manipulating
 access control lists.

Package: libebook1.2-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: libpam-runtime
Status: install ok installed
Priority: required
Section: base
Installed-Size: 180
Maintainer: Sam Hartman <hartmans@debian.org>
Source: pam
Version: 0.76-22
Replaces: libpam0g-util, libpam0g-dev
Conflicts: libpam0g-util, libpam0g (<< 0.66-0)
Conffiles:
 /etc/pam.conf c29f5bbea9887ff059b5973185c82212
 /etc/pam.d/other 31aa7f2181889ffb00b87df4126d1701
Description: Runtime support for the PAM library
 Contains configuration files and  directories required for
 authentication  to work on Debian systems.  This package is required
 on almost all installations.

Package: libsmjs-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: exim
Status: install ok installed
Priority: important
Section: mail
Installed-Size: 1464
Maintainer: Mark Baker <mark@mnb.org.uk>
Architecture: powerpc
Version: 3.36-16sarge1
Replaces: mail-transport-agent
Provides: mail-transport-agent
Depends: libc6 (>= 2.3.2.ds1-21), libdb3 (>= 3.2.9-22), libident (>= 0.22-3), libldap2 (>= 2.1.17-1), libpam0g (>= 0.76), libpcre3 (>= 4.5), cron (>= 3.0pl1-42)
Recommends: netbase
Suggests: mail-reader, eximon
Conflicts: mail-transport-agent, exim-doc-html (<= 3.00-2), suidregister (<< 0.50)
Conffiles:
 /etc/init.d/exim be22d6e2a142ba91a1f8b641033b4fe6
 /etc/cron.daily/exim ae17394b16b990b007fa059454887911
 /etc/cron.d/exim 5bc1e41f02f362e4fadfdc72588a0a2c
 /etc/ppp/ip-up.d/exim b3875ed036bd9e2a22bb6e1c6f0b4acc
 /etc/email-addresses 6bea09fbb18e4676012105fa5fc726c6
Description: An obsolete MTA (Mail Transport Agent), replaced by exim4
 This package contains exim 3, an outdated version of the exim Mail
 Transport Agent. This package is not going to be updated any more,
 and its users are encouraged to update to exim4, the current version
 of exim, or to migrate towards an entirely different MTA.
 .
 There is no automated update path from exim 3 to exim4 since the
 configuration formats are rather different. Debian's exim4 packages
 will try to pre-seed their debconf questions from an exim 3
 configuration that is found on the system. This will work fine for an
 exim 3 configuration created by eximconfig, the configuration tool
 used by Debian's exim 3 packages. If you have manually tweaked your
 exim 3 configuration, you'll most probably need to tweak your new exim
 4 configuration as well.
 .
 The exim 4 README.Debian file installed to
 /usr/share/doc/exim4-base/README.Debian.* has more information about
 updating from exim 3.

Package: openoffice.org-help-hi-in
Status: purge ok not-installed
Priority: optional
Section: doc

Package: sysvinit
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 324
Maintainer: Miquel van Smoorenburg <miquels@cistron.nl>
Architecture: powerpc
Version: 2.86.ds1-1
Replaces: last, bsdutils (<= 2.0-2)
Depends: coreutils
Pre-Depends: libc6 (>= 2.3.2.ds1-4), initscripts, sysv-rc (>= 2.85-2) | file-rc (>> 0.7.0)
Conflicts: last
Description: System-V like init
 Init is the first program to run after your system is booted, and
 continues to run as process number 1 until your system halts. Init's
 job is to start other programs that are essential to the operation of
 your system. All processes are descended from init. For more information,
 see the manual page init(8).

Package: libmythes-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: swat
Status: install ok not-installed
Priority: optional
Section: net

Package: postgresql-client-8.1
Status: purge ok not-installed
Priority: optional
Section: misc

Package: lighttpd-mod-webdav
Status: purge ok not-installed
Priority: optional
Section: web

Package: initscripts
Status: install ok installed
Priority: required
Section: base
Installed-Size: 244
Maintainer: Miquel van Smoorenburg <miquels@cistron.nl>
Architecture: powerpc
Source: sysvinit
Version: 2.86.ds1-1
Replaces: sysvinit (<< 2.85-12), libc6, libc6.1, libc0.1, libc0.3
Depends: libc6 (>= 2.3.2.ds1-4), libc6 (>= 2.3.2.ds1-12), dpkg (>= 1.9.0), mount (>= 2.11l-1), util-linux (>= 2.9t-2), e2fsprogs (>= 1.19-1), coreutils (>= 5.0.91-2)
Conflicts: kbd (<< 0.95-2), mdutils (<< 0.35-9)
Conffiles:
 /etc/init.d/bootclean.sh 0d1d6f95cf963039ae8432b84b86ec7d
 /etc/init.d/bootlogd c0f2d42ebccf2557f06bf66604b18d99
 /etc/init.d/bootmisc.sh 455df9cd285c5d6326a436efdc74c40b
 /etc/init.d/checkfs.sh 967e9fe550b2c542afb33e68fc55642c
 /etc/init.d/checkroot.sh daf91cd7620b2e1d27211e8c18cf1401
 /etc/init.d/halt 4808f1aede4c2a7b0fac8ccb0fb8c453
 /etc/init.d/hostname.sh d8d00942182f145fa79ee6e3f21701d9
 /etc/init.d/mountall.sh fd7357a4265988882f726583140e6945
 /etc/init.d/mountnfs.sh b7dc66770a0e871b2c6385439b96fb97
 /etc/init.d/mountvirtfs bb68b339a394ddabd0c46963f461000c
 /etc/init.d/reboot aff6c76c29e8daa1f7c47479024d51b2
 /etc/init.d/rmnologin 347e049a5dffc54d5cb35ec1db993d2a
 /etc/init.d/sendsigs fe47e89705d4e8cbeef67d5d58ffbdbc
 /etc/init.d/single e52066862f174d4645ff1940791fc9f0
 /etc/init.d/umountfs 16da012fa60187f152dd8f22723437fc
 /etc/init.d/umountnfs.sh 79ce331d23ab5c11d5092107defd83aa
 /etc/init.d/urandom adf134b3b5186310f0746bc75e067016
 /etc/default/bootlogd 70a108da715299a6e33470eb450669fb
 /etc/default/devpts fc857c5ac5fb84d80720ed4d1c624f6e
 /etc/default/halt 18d9844cf8ca8608e2a559a4555e593a
 /etc/default/tmpfs 6adb7e5e79d0a59d4e95905f6bef2512
Description: Standard scripts needed for booting and shutting down
 These scripts are meant for standard Debian/GNU/Linux installations.

Package: libblkid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 132
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: powerpc
Source: e2fsprogs
Version: 1.37-2sarge1
Depends: libc6 (>= 2.3.2.ds1-21)
Description: block device id library
 The blkid library which allows system programs like fsck and
 mount to quickly and easily find block devices by filesystem UUID and
 LABEL.  This allows system administrators to avoid specifiying
 filesystems by hard-coded device names, but via a logical naming
 system instead.

Package: dc
Status: install ok installed
Priority: standard
Section: math
Installed-Size: 200
Maintainer: Dirk Eddelbuettel <edd@debian.org>
Source: bc
Version: 1.06-15
Depends: libc6 (>= 2.3.2.ds1-4)
Description: The GNU dc arbitrary precision reverse-polish calculator
 GNU dc is a reverse-polish desk calculator which supports unlimited
 precision arithmetic.  It also allows you to define and call macros.
 .
 A reverse-polish calculator stores numbers on a stack. Entering a number
 pushes it on the stack.  Arithmetic operations pop arguments off the
 stack and push the results.

Package: qt4-qtconfig
Status: purge ok not-installed
Priority: optional
Section: x11

Package: iamerican
Status: install ok installed
Priority: standard
Section: text
Installed-Size: 1232
Maintainer: David Coe <davidc@debian.org>
Architecture: powerpc
Source: ispell
Version: 3.1.20.0-4
Provides: ispell-dictionary
Depends: ispell, debconf, dictionaries-common (>= 0.20), debconf (>= 0.5) | debconf-2.0
Recommends: wamerican
Conflicts: ispell (<< 3.1.18-2)
Description: An American English dictionary for ispell
 This is the americanmed+ dictionary, as supplied with
 the source for ispell, with additional words added from
 the more comprehensive wamerican wordlist package.
 .
 This package also recommends wamerican because ispell's
 (L)ookup command needs a wordlist.

Package: libss2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 96
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: powerpc
Source: e2fsprogs
Version: 1.37-2sarge1
Replaces: e2fsprogs (<< 1.34-1)
Depends: libcomerr2
Description: command-line interface parsing library
 This package includes a tool that parses a command table to generate
 a simple command-line interface parser, the include files needed to
 compile and use it, and the static libs.
 .
 It was originally inspired by the Multics SubSystem library.

Package: php4-imap
Status: purge ok not-installed
Priority: optional
Section: web

Package: libsigc++-1.2-5c102
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 96
Maintainer: Daniel Burrows <dburrows@debian.org>
Architecture: powerpc
Source: libsigc++-1.2
Version: 1.2.5-4
Depends: libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.4.1-3)
Conflicts: libsigc++-1.2-5
Description: type-safe Signal Framework for C++ - runtime
 This library implements a full callback system for use in widget
 libraries, abstract interfaces, and general programming. It provides
 the ability to connect an abstract callback to a class method,
 function, or function object, and contains adaptor classes for
 connection of dissimilar callbacks.
 .
 These are the runtime files for libsigc++, needed only if you wish to
 run software which depends on it.

Package: findutils
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 620
Maintainer: Andreas Metzler <ametzler@debian.org>
Version: 4.1.20-6
Pre-Depends: libc6 (>= 2.3.2.ds1-4)
Conffiles:
 /etc/cron.daily/find 7eb265877a0e861849027c1f6ec8e8ec
 /etc/updatedb.conf e54a691b0d63f55b30fac98bada6068c
Description: utilities for finding files--find, xargs, and locate
 These utilities find files meeting specified criteria and perform
 various actions on the files which are found.

Package: tinymux
Status: purge ok not-installed
Priority: optional
Section: games

Package: linux-support-2.6.18-4
Status: purge ok not-installed
Priority: optional
Section: devel

Package: openoffice.org-l10n-nr
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-l10n-ns
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-l10n-nl
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-l10n-nn
Status: purge ok not-installed
Priority: optional
Section: editors

Package: libecpg-compat2
Status: purge ok not-installed
Priority: optional
Section: libs

Package: libwpd8-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: openoffice.org-l10n-ne
Status: purge ok not-installed
Priority: optional
Section: editors

Package: mozilla
Status: purge ok not-installed
Priority: optional
Section: web

Package: openoffice.org-l10n-nb
Status: purge ok not-installed
Priority: optional
Section: editors

Package: netkit-ping
Status: install ok installed
Priority: important
Section: net
Installed-Size: 72
Maintainer: Anthony Towns <ajt@debian.org>
Source: netkit-base
Version: 0.10-10
Replaces: netbase (<< 4.00)
Provides: ping
Depends: libc6 (>= 2.3.2.ds1-4)
Conflicts: ping, suidmanager (<< 0.50)
Description: The ping utility from netkit
 The ping command sends ICMP ECHO_REQUEST packets to a host in order to
 test if the host is reachable via the network.

Package: ipsec-tools
Status: purge ok not-installed
Priority: extra
Section: net

Package: thunderbird-inspector
Status: purge ok not-installed
Priority: optional
Section: mail

Package: quagga
Status: purge ok not-installed
Priority: optional
Section: net

Package: openoffice.org-l10n-dz
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-l10n-za
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-l10n-da
Status: purge ok not-installed
Priority: optional
Section: editors

Package: php5-pspell
Status: purge ok not-installed
Priority: optional
Section: web

Package: openoffice.org-l10n-de
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-l10n-zu
Status: purge ok not-installed
Priority: optional
Section: editors

Package: iceape-browser
Status: purge ok not-installed
Priority: optional
Section: web

Package: ncurses-term
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 6084
Maintainer: Daniel Jacobowitz <ncurses-maint@debian.org>
Source: ncurses
Version: 5.4-4
Description: Additional terminal type definitions
 This package contains all of the terminal definitions not found in
 the ncurses-base package.  There are far too many to list here.

Package: ispell
Status: install ok installed
Priority: standard
Section: text
Installed-Size: 428
Maintainer: David Coe <davidc@debian.org>
Architecture: powerpc
Version: 3.1.20.0-4
Depends: dictionaries-common (>= 0.20), iamerican | ispell-dictionary, libc6 (>= 2.3.2.ds1-4), libncurses5 (>= 5.3.20030510-1)
Recommends: wordlist
Suggests: spell
Description: International Ispell (an interactive spelling corrector)
 Ispell corrects spelling in plain text, LaTeX, sgml/html/xml,
 and nroff files.  [x]Emacs and jed have nice interfaces to
 ispell, and ispell works from many other tools and from the
 command line as well.
 .
 No ispell dictionaries are included in this package; you must install
 at least one of them ("iamerican" is the default dependency for no
 good reason); install the "ispell-dictionary" package(s) for the
 lanuguage(s) you and your users will want to spell-check.
 .
 It's a good idea to install "wordlist" package(s) for the same
 language(s), because they'll be used by ispell's (L)ookup command.

Package: e2fsprogs
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 1432
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: powerpc
Version: 1.37-2sarge1
Replaces: hurd (<= 20040301-1)
Pre-Depends: e2fslibs (= 1.37-2sarge1), libblkid1 (>= 1.34-1), libc6 (>= 2.3.2.ds1-21), libcomerr2 (>= 1.34-1), libss2 (>= 1.34-1), libuuid1 (>= 1.34-1)
Suggests: gpart, parted, e2fsck-static
Conflicts: dump (<< 0.4b4-4), quota (<< 1.55-8.1), initscripts (<< 2.85-4), sysvinit (<< 2.85-4)
Description: ext2 file system utilities and libraries
 EXT2 stands for "Extended Filesystem", version 2. It's the main
 filesystem type used for hard disks on Debian and other Linux systems.
 .
 This package contains programs for creating, checking, and maintaining EXT2
 filesystems, and the generic `fsck' wrapper.

Package: openoffice.org-help-zh-cn
Status: purge ok not-installed
Priority: optional
Section: doc

Package: libnss3-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: php4-ldap
Status: purge ok not-installed
Priority: optional
Section: web

Package: openoffice.org-l10n-pt
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-l10n-pl
Status: purge ok not-installed
Priority: optional
Section: editors

Package: php4-mhash
Status: purge ok not-installed
Priority: optional
Section: web

Package: linux-doc-2.6.18
Status: purge ok not-installed
Priority: optional
Section: doc

Package: centericq
Status: purge ok not-installed
Priority: optional
Section: net

Package: vlc-plugin-arts
Status: purge ok not-installed
Priority: optional
Section: graphics

Package: php4-mysql
Status: purge ok not-installed
Priority: optional
Section: web

Package: evolution-plugins-experimental
Status: purge ok not-installed
Priority: optional
Section: gnome

Package: cpp
Status: install ok installed
Priority: standard
Section: interpreters
Installed-Size: 84
Maintainer: Debian GCC maintainers <debian-gcc@lists.debian.org>
Architecture: powerpc
Source: gcc-defaults (1.21)
Version: 4:3.3.5-3
Depends: cpp-3.3 (>= 1:3.3.5-1)
Suggests: cpp-doc
Conflicts: cpp-doc (<< 1:2.95.3)
Description: The GNU C preprocessor (cpp)
 The GNU C preprocessor is a macro processor that is used automatically
 by the GNU C compiler to transform programs before actual compilation.
 .
 This package has been separated from gcc for the benefit of those who
 require the preprocessor but not the compiler.
 .
 This is a dependency package providing the default GNU C preprocessor.

Package: evolution-plugins
Status: purge ok not-installed
Priority: optional
Section: gnome

Package: tethereal
Status: purge ok not-installed
Priority: optional
Section: net

Package: libnss-db
Status: install ok installed
Priority: standard
Section: admin
Installed-Size: 160
Maintainer: Ben Collins <bcollins@debian.org>
Version: 2.2-6.3
Depends: libc6 (>= 2.3.2.ds1-21), libdb3 (>= 3.2.9-22), make
Conffiles:
 /etc/default/libnss-db 1e1d08cb78eace64ec32a1fde00b2cc9
Description: DB Name Service Module
 This package supports using the "db" mechanism for Name Service Switch.
 Glibc 2.1.92 and before included this module, but it has since been
 split and is now a separate package. If you use .db files for your
 passwd, shadow, group or other naming databases, then you need this module.

Package: linux-headers-2.6.18-4-all
Status: purge ok not-installed
Priority: optional
Section: devel

Package: libclamav-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: gzip
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 240
Maintainer: Bdale Garbee <bdale@gag.com>
Version: 1.3.5-10sarge2
Depends: debianutils (>= 1.6)
Pre-Depends: libc6 (>= 2.3.2.ds1-21)
Suggests: less
Description: The GNU compression utility
 This is the standard GNU file compression utility, which is also the default
 compression tool for Debian.  It typically operates on files with names
 ending in '.gz'.
 .
 This package can also decompress '.Z' files created with 'compress'.

Package: dpkg
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 5652
Maintainer: Dpkg Development <debian-dpkg@lists.debian.org>
Version: 1.10.28
Replaces: dpkg-doc-ja, dpkg-static, manpages-de (<= 0.4-3)
Pre-Depends: dselect, libc6 (>= 2.3.2.ds1-21)
Conflicts: sysvinit (<< 2.82-1), dpkg-iasearch (<< 0.11), dpkg-static, dpkg-dev (<< 1.10)
Conffiles:
 /etc/dpkg/origins/debian 24926c0576edec3e316fd9f6072b8118
 /etc/alternatives/README 69c4ba7f08363e998e0f2e244a04f881
Description: Package maintenance system for Debian
 This package contains the programs which handle the installation and
 removal of packages on your system.
 .
 The primary interface for the dpkg suite is the `dselect' program;
 a more low-level and less user-friendly interface is available in
 the form of the `dpkg' command.
 .
 In order to unpack and build Debian source packages you will need to
 install the developers' package `dpkg-dev' as well as this one.

Package: libgpmg1
Status: purge ok not-installed
Priority: optional
Section: libs

Package: spidermonkey-bin
Status: purge ok not-installed
Priority: optional
Section: interpreters

Package: libpcre3
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 252
Maintainer: Mark Baker <mbaker@iee.org>
Source: pcre3
Version: 4.5-1.2sarge1
Replaces: remembrance-agent (<< 2.11-5)
Depends: libc6 (>= 2.3.2.ds1-21)
Conflicts: libpcre3-dev (<= 4.3-3)
Description: Perl 5 Compatible Regular Expression Library - runtime files
 This is a library of functions to support regular expressions whose syntax
 and semantics are as close as possible to those of the Perl 5 language.
 .
 This package contains the runtime libraries.

Package: aptitude
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 5724
Maintainer: Daniel Burrows <dburrows@debian.org>
Architecture: powerpc
Version: 0.2.15.9-2
Depends: libapt-pkg-libc6.3-5-3.3, libc6 (>= 2.3.2.ds1-4), libgcc1 (>= 1:3.4.1-3), libncurses5 (>= 5.4-1), libsigc++-1.2-5c102, libstdc++5 (>= 1:3.3.4-1)
Recommends: aptitude-doc-en | aptitude-doc
Conffiles:
 /etc/logrotate.d/aptitude fb66bc5dc8c13edbcb83cea15ff86959
Description: terminal-based apt frontend
 aptitude is a terminal-based apt frontend with a number of useful
 features, including: a mutt-like syntax for matching packages in a
 flexible manner, dselect-like persistence of user actions, the
 ability to retrieve and display the Debian changelog of most
 packages, and extreme flexibility and customization.
 .
 aptitude is also Y2K-compliant, non-fattening, naturally cleansing,
 and housebroken.

Package: wxvlc
Status: purge ok not-installed
Priority: optional
Section: graphics

Package: mozilla-thunderbird-typeaheadfind
Status: purge ok not-installed
Priority: optional
Section: mail

Package: postgresql-8.1
Status: purge ok not-installed
Priority: optional
Section: misc

Package: openoffice.org-l10n-hi-in
Status: purge ok not-installed
Priority: optional
Section: editors

Package: libncursesw5
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 600
Maintainer: Daniel Jacobowitz <ncurses-maint@debian.org>
Architecture: powerpc
Source: ncurses
Version: 5.4-4
Depends: libc6 (>= 2.3.2.ds1-4)
Description: Shared libraries for terminal handling (wide character support)
 This package contains the shared libraries necessary to run programs
 compiled with ncursesw, which includes support for wide characters.

Package: firefox-gnome-support
Status: purge ok not-installed
Priority: optional
Section: web

Package: liblocale-gettext-perl
Status: install ok installed
Priority: standard
Section: perl
Installed-Size: 108
Maintainer: Raphael Hertzog <hertzog@debian.org>
Architecture: powerpc
Version: 1.01-17
Depends: libc6 (>= 2.3.1-1), perlapi-5.8.0, perl-base (>= 5.8.0-17)
Pre-Depends: perl-base (>= 5.8)
Description: Using libc functions for internationalization in Perl
 The gettext module permits access from perl to the gettext() family of
 functions for retrieving message strings from databases constructed
 to internationalize software.
 .
 It provides gettext(), dgettext(), dcgettext(), textdomain(),
 bindtextdomain(), bind_textdomain_codeset(), ngettext(), dcngettext()
 and dngettext().

Package: php4-odbc
Status: purge ok not-installed
Priority: optional
Section: web

Package: kernel-patch-openvz
Status: purge ok not-installed
Priority: extra
Section: devel

Package: libcurl3-openssl-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: lighttpd-doc
Status: purge ok not-installed
Priority: optional
Section: doc

Package: php4-curl
Status: purge ok not-installed
Priority: optional
Section: web

Package: reportbug
Status: deinstall ok config-files
Priority: standard
Section: utils
Installed-Size: 352
Maintainer: Chris Lawrence <lawrencc@debian.org>
Version: 3.8
Config-Version: 3.8
Depends: python2.3
Recommends: python2.3-cjkcodecs | python2.3-iconvcodec
Suggests: postfix | exim4 | mail-transport-agent, gnupg | pgp, debconf-utils (>> 1.1.0), debsums, file (>> 1.30)
Conffiles:
 /etc/reportbug.conf 93d71604c280a4711e8cfd33a77db0ce
Description: reports bugs in the Debian distribution
 reportbug is a tool designed to make the reporting of bugs in Debian
 and derived distributions relatively painless.  Its features include:
 .
  * Integration with the mutt, af, and mh/nmh mail readers.
  * Access to outstanding bug reports to make it easier to identify
    whether problems have already been reported.
  * Automatic checking for newer versions of packages.
  * Optional automatic verification of integrity of packages via debsums.
  * Support for following-up on outstanding reports.
  * Optional PGP/GnuPG integration.
 .
 reportbug is designed to be used on systems with an installed mail
 transport agent, like exim or sendmail; however, you can edit the
 configuration file and send reports using any available mail server.
 .
 If your system's users use locales with character sets other than
 UTF-8 and ISO-8859-*, one of either python2.3-cjkcodecs or
 python2.3-iconvcodec is required for proper operation.  For Asian
 locales, the use of python2.3-cjkcodecs is preferred over the more
 limited python2.3-iconvcodec.

Package: tshark
Status: purge ok not-installed
Priority: optional
Section: net

Package: openoffice.org-calc
Status: purge ok not-installed
Priority: optional
Section: editors

Package: info
Status: install ok installed
Priority: important
Section: doc
Installed-Size: 368
Maintainer: Josip Rodin <joy-packages@debian.org>
Source: texinfo
Version: 4.7-2.2sarge2
Replaces: texinfo (<< 4.7-2)
Provides: info-browser
Depends: libc6 (>= 2.3.2.ds1-21), libncurses5 (>= 5.4-1)
Conflicts: xemacs-support
Description: Standalone GNU Info documentation browser
 The Info file format is an easily-parsable representation for online
 documents. This program allows you to view Info documents, like the
 ones stored in /usr/share/info.
 .
 Much of the software in Debian comes with its online documentation in
 the form of Info files, so it is most likely you will want to install it.

Package: lighttpd-mod-mysql-vhost
Status: purge ok not-installed
Priority: optional
Section: web

Package: iceape-gnome-support
Status: purge ok not-installed
Priority: optional
Section: web

Package: python-magic
Status: purge ok not-installed
Priority: extra
Section: python

Package: libopencdk8
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 232
Maintainer: Matthias Urlichs <smurf@debian.org>
Architecture: powerpc
Source: opencdk8
Version: 0.5.5-10
Replaces: libopencdk4 (= 0.4.3-1)
Depends: libc6 (>= 2.3.2.ds1-4), libgcrypt11, libgpg-error0 (>= 1.0), zlib1g (>= 1:1.2.1)
Conflicts: libopencdk4 (= 0.4.3-1)
Description: Open Crypto Development Kit (OpenCDK) (runtime)
 This library provides functions to handle basic parts of the OpenPGP
 message format.
 .
 The aim of the library is *not* to replace any available PGP version.
 There will be no real support for key management (sign, revoke, alter
 preferences, ...) and some other parts are only rudimentarily
 available. The main purpose is to handle and understand OpenPGP
 packets and to execute basic operations on them. For example to
 encrypt/decrypt or to sign/verify keys and some packet routines.
 .
 Because of the fact that sensitive data is being handled, the
 library doesn't contain any real cryptographic code. The libgcrypt
 package is used for all crypto routines.
 .
 This package contains the runtime library for OpenCDK.

Package: amiga-fdisk
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 92
Maintainer: Christian T. Steigies <cts@debian.org>
Version: 0.04-9
Replaces: amiga-fdisk-bf, amiga-fdisk-cross
Depends: libc6 (>= 2.3.2.ds1-4), libreadline4 (>= 4.3-1)
Conflicts: amiga-fdisk-bf
Description: Partition editor for Amiga
 Amiga-fdisk is, similar to fdisk for PCs, a program to partition
 harddisks. Though it seems to work quite well, it's still got some
 sort of beta status. It's suggested that you still use the AmigaDOS
 native tool "HDToolBox" to partition your harddisks and use
 amiga-fdisk only for querying partition information.

Package: iceape-chatzilla
Status: purge ok not-installed
Priority: optional
Section: net

Package: openoffice.org-l10n-af
Status: purge ok not-installed
Priority: optional
Section: editors

Package: thunderbird-typeaheadfind
Status: purge ok not-installed
Priority: optional
Section: mail

Package: gcc
Status: install ok installed
Priority: standard
Section: devel
Installed-Size: 64
Maintainer: Debian GCC maintainers <debian-gcc@lists.debian.org>
Architecture: powerpc
Source: gcc-defaults (1.21)
Version: 4:3.3.5-3
Provides: c-compiler
Depends: cpp (>= 4:3.3.5-3), gcc-3.3 (>= 1:3.3.5-1), cpp-3.3 (>= 1:3.3.5-1)
Recommends: libc-dev
Suggests: make, manpages-dev, autoconf, automake, libtool, flex, bison, gdb, gcc-doc
Conflicts: gcc-doc (<< 1:2.95.3)
Description: The GNU C compiler
 This is the GNU C compiler, a fairly portable optimizing compiler for C.
 .
 This is a dependency package providing the default GNU C compiler.

Package: icedove-dev
Status: purge ok not-installed
Priority: optional
Section: mail

Package: freetype2-demos
Status: purge ok not-installed
Priority: optional
Section: utils

Package: libapache-mod-jk
Status: purge ok not-installed
Priority: optional
Section: net

Package: php4-cli
Status: purge ok not-installed
Priority: optional
Section: web

Package: linux-patch-debian-2.6.18
Status: purge ok not-installed
Priority: optional
Section: devel

Package: diff
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 756
Maintainer: Santiago Vila <sanvila@debian.org>
Source: diffutils
Version: 2.8.1-11
Pre-Depends: libc6 (>= 2.3.2.ds1-4)
Suggests: diff-doc
Description: File comparison utilities
 The diff package provides the diff, diff3, sdiff, and cmp programs.
 .
 `diff' shows differences between two files, or each corresponding file
 in two directories.  `cmp' shows the offsets and line numbers where
 two files differ.  `cmp' can also show all the characters that
 differ between the two files, side by side.  `diff3' shows differences
 among three files.  `sdiff' merges two files interactively.
 .
 The set of differences produced by `diff' can be used to distribute
 updates to text files (such as program source code) to other people.
 This method is especially useful when the differences are small compared
 to the complete files.  Given `diff' output, the `patch' program can
 update, or "patch", a copy of the file.

Package: openoffice.org-l10n-te-in
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-l10n-ka
Status: purge ok not-installed
Priority: optional
Section: editors

Package: libkrb5-dbg
Status: purge ok not-installed
Priority: extra
Section: libdevel

Package: openoffice.org-l10n-ko
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-l10n-km
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-help-sv
Status: purge ok not-installed
Priority: optional
Section: doc

Package: openoffice.org-l10n-ku
Status: purge ok not-installed
Priority: optional
Section: editors

Package: libbz2-1.0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 120
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Source: bzip2
Version: 1.0.2-7
Depends: libc6 (>= 2.3.2.ds1-21)
Suggests: libbz2-dev, bzip2
Description: high-quality block-sorting file compressor library - runtime
 This package contains libbzip2 which is used by the bzip2 compressor.
 .
 bzip2 is a freely available, patent free, high-quality data compressor.
 It typically compresses files to within 10% to 15% of the best available
 techniques, whilst being around twice as fast at compression and six
 times faster at decompression.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding.  Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
 .
 Homepage http://sources.redhat.com/bzip2/

Package: openoffice.org-help-sl
Status: purge ok not-installed
Priority: optional
Section: doc

Package: mozilla-firefox-dom-inspector
Status: purge ok not-installed
Priority: optional
Section: web

Package: perl
Status: install ok installed
Priority: standard
Section: interpreters
Installed-Size: 11708
Maintainer: Brendan O'Dea <bod@debian.org>
Architecture: powerpc
Version: 5.8.4-8sarge5
Replaces: perl-5.005 (<< 6), perl-5.6 (<< 6), perl-doc (<< 5.8.0-1), perl-modules (<< 5.8.1-1), libdigest-md5-perl, libmime-base64-perl, libtime-hires-perl, libstorable-perl
Provides: perl5, libdigest-md5-perl, libmime-base64-perl, libtime-hires-perl, libstorable-perl
Depends: perl-base (= 5.8.4-8sarge5), perl-modules (>= 5.8.4-8sarge5), libc6 (>= 2.3.2.ds1-21), libdb4.2, libgdbm3
Recommends: perl-doc
Suggests: libterm-readline-gnu-perl | libterm-readline-perl-perl
Conflicts: perl-5.004 (<< 6), perl-5.005 (<< 6), perl-5.6 (<< 6), perl-doc (<< 5.8.4-1), libdigest-md5-perl (<< 2.33-1), libmime-base64-perl (<< 3.04-1), libtime-hires-perl (<< 1.59-1), libstorable-perl (<< 2.12-1)
Description: Larry Wall's Practical Extraction and Report Language
 An interpreted scripting language, known among some as "Unix's Swiss
 Army Chainsaw".
 .
 Perl is optimised for scanning arbitrary text files and system
 administration.  It has built-in extended regular expression matching
 and replacement, a data-flow mechanism to improve security with
 setuid scripts and is extensible via modules that can interface to C
 libraries.

Package: libcurl3-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: libedata-book1.2-2
Status: purge ok not-installed
Priority: optional
Section: libs

Package: clamav-milter
Status: purge ok not-installed
Priority: extra
Section: utils

Package: postgresql-plperl-7.4
Status: purge ok not-installed
Priority: optional
Section: misc

Package: krb5-kdc
Status: purge ok not-installed
Priority: optional
Section: net

Package: linux-headers-2.6.18-4-powerpc64
Status: purge ok not-installed
Priority: optional
Section: devel

Package: openoffice.org-l10n-ml-in
Status: purge ok not-installed
Priority: optional
Section: editors

Package: libdb2
Status: install ok installed
Priority: required
Section: base
Installed-Size: 676
Maintainer: Debian Berkeley DB Maintainers <pkg-db-devel@lists.alioth.debian.org>
Source: db2
Version: 2:2.7.7.0-9
Replaces: libdb2.6, lib-bdb2, libc6 (<< 2.2.2-4), libc6.1 (<< 2.2.2-4), libc0.2 (<< 2.2.2-4)
Pre-Depends: libc6 (>= 2.3.2.ds1-4)
Conflicts: lib-bdb2
Description: The Berkeley database routines (run-time files)
 libdb2 is a library for manipulating database files, developed at
 Berkeley and extended by Sleepycat Software Inc.
 This is an ancient, obsolete version.
 .
 It supports three kinds of file formats:
  * btree. A representation of a sorted, balanced tree structure.
  * hashed. An extensible, dynamic hashing scheme.
  * UNIX file oriented. A byte stream file with fixed or variable
    length records.
 Other core database services:
  * page cache management for fast access, clean page allocation.
  * lock with multiple reader/writer granularity.
  * nested transaction support with logging and rollback recovery
    (two phase commit).
  * Large set of utilities, to dump/load/restore data and examine log.

Package: libdb3
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 912
Maintainer: Debian Berkeley DB Maintainers <pkg-db-devel@lists.alioth.debian.org>
Source: db3
Version: 3.2.9-22
Depends: libc6 (>= 2.3.2.ds1-4)
Conflicts: libdb2 (<< 2:2.7.7-3)
Description: Berkeley v3 Database Libraries [runtime]
 This is the runtime package for programs that use the Berkeley v3
 database library.
 .
 Many programs use the Berkeley Database to store their data. Other
 versions of the database can be found in the db2, db4.0, db4.1 and
 db4.2 packages.

Package: postgresql-contrib-8.1
Status: purge ok not-installed
Priority: optional
Section: misc

Package: linux-image-2.6.18-4-powerpc-miboot
Status: purge ok not-installed
Priority: optional
Section: admin

Package: evolution
Status: purge ok not-installed
Priority: optional
Section: gnome

Package: gimp-python
Status: purge ok not-installed
Priority: optional
Section: graphics

Package: openoffice.org-help-it
Status: purge ok not-installed
Priority: optional
Section: doc

Package: sysklogd
Status: install ok installed
Priority: important
Section: base
Installed-Size: 208
Maintainer: Martin Schulze <joey@debian.org>
Version: 1.4.1-17
Replaces: syslogd
Provides: syslogd, system-log-daemon
Depends: libc6 (>= 2.3.2.ds1-21), klogd | linux-kernel-log-daemon
Conflicts: syslogd
Conffiles:
 /etc/syslog.conf 3882195aa34cd97b8a57120bc8b47f3b
 /etc/init.d/sysklogd 7337ea73b78e2db57730612688df6665
 /etc/cron.daily/sysklogd deeb1ff55fe8ca49054901a0e80f10e6
 /etc/cron.weekly/sysklogd 766afd8b048c440c4a0c4013e1f439fb
Description: System Logging Daemon
 This package implements the system log daemon, which is an enhanced
 version of the standard Berkeley utility program. It is responsible
 for providing logging of messages received from programs and facilities
 on the local host as well as from remote hosts.

Package: libkadm55
Status: purge ok not-installed
Priority: optional
Section: libs

Package: wireless-tools
Status: purge ok not-installed
Priority: extra
Section: net

Package: libxul0d-dbg
Status: purge ok not-installed
Priority: extra
Section: libdevel

Package: openoffice.org-l10n-zh-cn
Status: purge ok not-installed
Priority: optional
Section: editors

Package: procmail
Status: install ok installed
Priority: standard
Section: mail
Installed-Size: 348
Maintainer: Santiago Vila <sanvila@debian.org>
Version: 3.22-11
Depends: libc6 (>= 2.3.2.ds1-4)
Recommends: exim4 | mail-transport-agent | fetchmail
Conflicts: suidmanager (<< 0.50)
Description: Versatile e-mail processor
 Can be used to create mail-servers, mailing lists, sort your incoming
 mail into separate folders/files (real convenient when subscribing to one
 or more mailing lists or for prioritising your mail), preprocess your
 mail, start any programs upon mail arrival (e.g. to generate different
 chimes on your workstation for different types of mail) or selectively
 forward certain incoming mail automatically to someone.

Package: libqt4-core
Status: purge ok not-installed
Priority: optional
Section: libs

Package: iceape-dev
Status: purge ok not-installed
Priority: optional
Section: devel

Package: hiki
Status: purge ok not-installed
Priority: optional
Section: web

Package: linux-image-2.6.18-4-vserver-powerpc
Status: purge ok not-installed
Priority: optional
Section: admin

Package: php5-mcrypt
Status: purge ok not-installed
Priority: optional
Section: web

Package: libqt4-qt3support
Status: purge ok not-installed
Priority: optional
Section: libs

Package: php5-cli
Status: purge ok not-installed
Priority: optional
Section: web

Package: pptpd
Status: purge ok not-installed
Priority: optional
Section: net

Package: dselect
Status: install ok installed
Priority: required
Section: base
Installed-Size: 468
Maintainer: Dpkg Development <debian-dpkg@lists.debian.org>
Source: dpkg
Version: 1.10.28
Replaces: dpkg (<< 1.10.3)
Depends: libc6 (>= 2.3.2.ds1-21), libgcc1 (>= 1:3.4.1-3), libncurses5 (>= 5.4-1), libstdc++5 (>= 1:3.3.4-1)
Conffiles:
 /etc/dpkg/dselect.cfg 190f7cf843556324495ef12759b752e3
Description: a user tool to manage Debian packages
 dselect is the primary user interface for installing, removing and
 managing Debian packages. It is a front-end to dpkg.

Package: yaboot
Status: install ok installed
Priority: standard
Section: base
Installed-Size: 588
Maintainer: Warren A. Layton <zeevon@debian.org>
Version: 1.3.13-3
Replaces: quik
Depends: libc6 (>= 2.3.2.ds1-4)
Recommends: hfsutils, powerpc-utils (>= 1.1.3-2)
Conflicts: quik (<< 2.0e-0.6)
Description: Yet Another Bootloader
 This package contains 'yaboot', the bootloader of choice on the
 NewWorld line of Power Macintosh computers and on IBM CHRP computers.
 It supports loading a kernel from several different filesystems,
 including ext2, ext3, xfs, and reiserfs, as well as separate
 ramdisks and dual-booting.
 .
 This package includes the installer tools ybin and mkofboot, and a
 yabootconfig program for generating a simple /etc/yaboot.conf file.

Package: ntp-simple
Status: purge ok not-installed
Priority: optional
Section: net

Package: mozilla-plugin-vlc
Status: purge ok not-installed
Priority: optional
Section: graphics

Package: mime-support
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 168
Maintainer: Brian White <bcwhite@pobox.com>
Version: 3.28-1
Recommends: file (>= 3.27-3)
Conflicts: a2ps (<< 4.10.4), metamail (<< 2.7-44)
Conffiles:
 /etc/mime.types b676ecbfc05d97dfce407ded62e5cbe8
 /etc/mailcap.order ba07e08a7fe3741d0b8339127963190e
Description: MIME files 'mime.types' & 'mailcap', and support programs
 As these files can be used by all MIME compliant programs, they
 have been moved into their own package that others can depend upon.
 .
 Other packages add themselves as viewers/editors/composers/etc by
 using the provided "update-mime" program.
 .
 In addition, the commands "see", "edit", "compose", and "print"
 will display, alter, create, and print (respectively) any file using
 a program determined from the entries in the mime.types and mailcap
 files.

Package: php4-sybase
Status: purge ok not-installed
Priority: optional
Section: web

Package: libapache2-mod-php4
Status: purge ok not-installed
Priority: optional
Section: net

Package: libapache2-mod-php5
Status: install ok not-installed
Priority: optional
Section: net

Package: libedata-cal1.2-5
Status: purge ok not-installed
Priority: optional
Section: libs

Package: postgresql-doc-8.1
Status: purge ok not-installed
Priority: optional
Section: doc

Package: python-xpcom
Status: purge ok not-installed
Priority: extra
Section: python

Package: libexchange-storage1.2-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: php5-xsl
Status: purge ok not-installed
Priority: optional
Section: web

Package: cron
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 280
Maintainer: Steve Greenland <stevegr@debian.org>
Version: 3.0pl1-86
Depends: libc6 (>= 2.3.2.ds1-4), libpam0g (>= 0.76), debianutils (>= 1.7), adduser
Recommends: exim4 | postfix | mail-transport-agent
Suggests: anacron (>= 2.0-1), logrotate, lockfile-progs, checksecurity
Conflicts: suidmanager (<< 0.50), lockfile-progs (<< 0.1.7)
Conffiles:
 /etc/crontab b16c871ad13d4d7c44d610ef1546c194
 /etc/init.d/cron c323a0f1879c386ef44747110e3b5b06
 /etc/cron.daily/standard c3df5f1fe5cc4d5f5bc836c0d80f81df
 /etc/cron.monthly/standard 597fcd12507f76fb847cc0174ad98b63
 /etc/pam.d/cron b0578d348356cd0d046e37782419ea1d
 /etc/cron.hourly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.daily/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.weekly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.monthly/.placeholder e5e12910bf011222160404d7bdb824f2
 /etc/cron.d/.placeholder e5e12910bf011222160404d7bdb824f2
Description: management of regular background processing
 cron is a background process (`daemon') that runs programs at regular
 intervals (for example, every minute, day, week or month); which
 processes are run and at what times are specified in the `crontab'.
 .
 Users may also install crontabs so that processes are run on
 their behalf, though this feature can be disabled or restricted to
 particular users.
 .
 Output from the commands is usually mailed to the system administrator
 (or to the user in question); you should probably install a mail system
 as well so that you can receive these messages.
 .
 This cron package is configured by default to do various standard
 system maintenance tasks, such as ensuring that logfiles do not
 grow endlessly and overflow the disk.
 .
 The lockfile-progs package is only a "Suggests" because of the poor
 way that dselect handles "Recommends", but I do strongly suggest that
 you install it; it prevents /etc/cron.daily/standard from running multiple
 times if something gets jammed.

Package: iceweasel-dbg
Status: purge ok not-installed
Priority: extra
Section: devel

Package: lighttpd-mod-cml
Status: purge ok not-installed
Priority: optional
Section: web

Package: libcamel1.2-8
Status: purge ok not-installed
Priority: optional
Section: libs

Package: dovecot-imapd
Status: purge ok not-installed
Priority: optional
Section: mail

Package: libsasl7
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 328
Maintainer: Dima Barsky <dima@debian.org>
Source: cyrus-sasl
Version: 1.5.27-3
Depends: libc6 (>= 2.2.4-4), libdb2 (>= 2:2.7.7-4), libpam0g (>= 0.72-1)
Suggests: libsasl-digestmd5-plain, libsasl-modules-plain
Description: Authentication abstraction library.
 This is the Cyrus SASL API implementation. It can be used on the client
 or server side to provide authentication. See RFC 2222 for more
 information.
 .
 Any of: ANONYMOUS, CRAM-MD5, DIGEST-MD5, GSSAPI (MIT Kerberos 5 or Heimdal
 Kerberos 5), KERBEROS_V4, PLAIN, or LOGIN can be used.

Package: evolution-data-server-dev
Status: purge ok not-installed
Priority: optional
Section: devel

Package: libsasl2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 580
Maintainer: Dima Barsky <dima@debian.org>
Architecture: powerpc
Source: cyrus-sasl2
Version: 2.1.19.dfsg1-0sarge2
Depends: libc6 (>= 2.3.2.ds1-21), libdb4.2
Recommends: libsasl2-modules (= 2.1.19.dfsg1-0sarge2)
Conflicts: libsasl2-gssapi-mit (<< 2.1.18), libsasl2-krb4-mit (<< 2.1.18)
Description: Authentication abstraction library
 SASL is the Simple Authentication and Security Layer, a method for
 adding authentication support to connection-based protocols. To use
 SASL, a protocol includes a command for identifying and
 authenticating a user to a server and for optionally negotiating
 protection of subsequent protocol interactions. If its use is
 negotiated, a security layer is inserted between the protocol and the
 connection. See RFC 2222 for more information.
 .
 This is the Cyrus SASL API implementation, version 2.
 .
 Any of: ANONYMOUS, CRAM-MD5, DIGEST-MD5, GSSAPI (MIT Kerberos 5 or Heimdal
 Kerberos 5), KERBEROS_V4, OTP, PLAIN, or LOGIN can be used. This package
 is unusable without the SASL plugins. Most likely you will need to install
 the libsasl2-modules package.

Package: nano
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 1304
Maintainer: Jordi Mallach <jordi@debian.org>
Version: 1.2.4-5
Replaces: pico
Provides: editor
Depends: libc6 (>= 2.3.2.ds1-4), libncurses5 (>= 5.4-1)
Suggests: spell
Conflicts: nano-tiny (<= 1.0.0-1), pico
Conffiles:
 /etc/nanorc ffc097996eb5c45823848662a41b9db6
Description: free Pico clone with some new features
 GNU nano is a free replacement for Pico, the default Pine editor. Pine is
 copyrighted under a restrictive licence, that makes it unsuitable for
 Debian's main section. GNU nano is an effort to provide a Pico-like
 editor, but also includes some features that were missing in the original,
 such as 'search and replace', 'goto line' or internationalization support.

Package: libnspr4-0d
Status: purge ok not-installed
Priority: optional
Section: libs

Package: mozilla-firefox
Status: purge ok not-installed
Priority: optional
Section: web

Package: postgresql-client-7.4
Status: purge ok not-installed
Priority: optional
Section: misc

Package: pppoeconf
Status: install ok installed
Priority: optional
Section: net
Installed-Size: 176
Maintainer: Eduard Bloch <blade@debian.org>
Architecture: all
Version: 1.7
Depends: whiptail-provider | whiptail, ppp (>= 2.4.2+20040428-2) | pppoe (>= 3.0), ppp (>= 2.4.1.uus2-4), gettext-base (>= 0.13), sed (>= 3.95)
Recommends: locales
Suggests: xdialog
Description: configures PPPoE/ADSL connections
 Userfriendly tool for initial configuration of a DSL (PPPoE) connection.

Package: wireshark-common
Status: purge ok not-installed
Priority: optional
Section: net

Package: openoffice.org-l10n-th
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-l10n-tn
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-l10n-tg
Status: purge ok not-installed
Priority: optional
Section: editors

Package: linux-headers-2.6.18-4-powerpc-miboot
Status: purge ok not-installed
Priority: optional
Section: devel

Package: libwpd8-doc
Status: purge ok not-installed
Priority: optional
Section: doc

Package: openoffice.org-l10n-tr
Status: purge ok not-installed
Priority: optional
Section: editors

Package: mplayer-doc
Status: purge ok not-installed
Priority: optional
Section: graphics

Package: openoffice.org-l10n-ts
Status: purge ok not-installed
Priority: optional
Section: editors

Package: firefox
Status: purge ok not-installed
Priority: optional
Section: web

Package: libkrb5-dev
Status: purge ok not-installed
Priority: extra
Section: libdevel

Package: emacs
Status: purge ok not-installed
Priority: optional
Section: editors

Package: dpkg-awk
Status: purge ok not-installed
Priority: optional
Section: devel

Package: thunderbird-dev
Status: purge ok not-installed
Priority: optional
Section: mail

Package: time
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 144
Maintainer: Tollef Fog Heen <tfheen@debian.org>
Version: 1.7-21
Depends: libc6 (>= 2.3.2.ds1-4)
Description: The GNU time program for measuring cpu resource usage
 The `time' command runs another program, then displays information
 about the resources used by that program, collected by the system while
 the program was running.  You can select which information is reported
 and the format in which it is shown, or have `time' save the information
 in a file instead of display it on the screen.
 .
 The resources that `time' can report on fall into the general
 categories of time, memory, I/O, and IPC calls.
 .
 The GNU version can format the output in arbitrary ways by using a
 printf-style format string to include various resource measurements.

Package: iceape-mailnews
Status: purge ok not-installed
Priority: optional
Section: mail

Package: libedata-book1.2-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: openoffice.org-l10n-bn
Status: purge ok not-installed
Priority: optional
Section: editors

Package: libcurl3-dbg
Status: purge ok not-installed
Priority: extra
Section: libdevel

Package: centericq-utf8
Status: purge ok not-installed
Priority: optional
Section: net

Package: gsambad
Status: purge ok not-installed
Priority: optional
Section: admin

Package: openoffice.org-l10n-bg
Status: purge ok not-installed
Priority: optional
Section: editors

Package: mpack
Status: install ok installed
Priority: standard
Section: mail
Installed-Size: 112
Maintainer: Richard Braakman <dark@xs4all.nl>
Version: 1.6-1
Depends: libc6 (>= 2.3.1-1)
Suggests: mail-transport-agent, inewsinn | inews
Description: tools for encoding/decoding MIME messages
 Mpack and munpack are utilities for encoding and decoding
 (respectively) binary files in MIME (Multipurpose Internet
 Mail Extensions) format mail messages. For compatibility
 with older forms of transferring binary files, the munpack
 program can also decode messages in split-uuencoded format.
 .
 Instead of munpack, the package maintainer recommends the
 more versatile package uudeview.

Package: openoffice.org-l10n-br
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-filter-so52
Status: purge ok not-installed
Priority: optional
Section: misc

Package: openoffice.org-l10n-bs
Status: purge ok not-installed
Priority: optional
Section: editors

Package: ntpdate
Status: purge ok not-installed
Priority: optional
Section: net

Package: libc6
Status: install ok installed
Priority: required
Section: base
Installed-Size: 14572
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Source: glibc
Version: 2.3.2.ds1-22sarge6
Replaces: ldso (<= 1.9.11-9), timezone, timezones, gconv-modules, libtricks, netkit-rpc, netbase (<< 4.0), libc6-dev (<< 2.3.2.ds1-14)
Provides: glibc-2.3.2.ds1-22sarge6
Depends: libdb1-compat
Suggests: locales, glibc-doc
Conflicts: strace (<< 4.0-0), libnss-db (<= 2.2-6.1.1), timezone, timezones, gconv-modules, libtricks, libc6-doc, netkit-rpc, wine (<< 0.0.20031118-1), cyrus-imapd (<< 1.5.19-15)
Description: GNU C Library: Shared libraries and Timezone data
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
 Timezone data is also included.

Package: krb5-doc
Status: purge ok not-installed
Priority: optional
Section: doc

Package: libsmbclient-dev
Status: purge ok not-installed
Priority: extra
Section: libdevel

Package: quik
Status: install ok installed
Priority: important
Section: base
Installed-Size: 184
Maintainer: Peter De Schrijver (p2) <p2@debian.org>
Version: 2.1-6
Depends: libc6 (>= 2.3.2.ds1-4)
Description: Bootloader for PowerMac or CHRP systems
 The quik package provides the functionality necessary for booting a
 Linux Debian/PowerPC PowerMac or CHRP system from disk.  It includes
 first and second stage disk bootstrap and a program for installing the
 first stage bootstrap on the root disk.
 .
 Note that if you are running on a NewWorld machine, quik will be of
 limited use to you.  You should install yaboot instead.  It may even
 come handy on an OldWorld machine, since it provides the ofpath
 program and some documentation.

Package: icedove
Status: purge ok not-installed
Priority: optional
Section: mail

Package: gcc-3.3-base
Status: install ok installed
Priority: required
Section: devel
Installed-Size: 204
Maintainer: Debian GCC maintainers <debian-gcc@lists.debian.org>
Source: gcc-3.3
Version: 1:3.3.5-13
Description: The GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).

Package: klogd
Status: install ok installed
Priority: important
Section: base
Installed-Size: 132
Maintainer: Martin Schulze <joey@debian.org>
Source: sysklogd
Version: 1.4.1-17
Replaces: sysklogd
Provides: linux-kernel-log-daemon
Depends: libc6 (>= 2.3.2.ds1-21), sysklogd | system-log-daemon
Conflicts: sysklogd (<= 1.3-33)
Conffiles:
 /etc/init.d/klogd 4c2595d4db7fd73ca6f211055ce21c6d
Description: Kernel Logging Daemon
 The klogd daemon listens to kernel message sources and is responsible
 for prioritizing and processing operating system messages.  The klogd
 daemon can run as a client of syslogd or optionally as a standalone
 program.  Klogd can now be used to decode EIP addresses if it can
 determine a System.map file.

Package: icedove-typeaheadfind
Status: purge ok not-installed
Priority: optional
Section: mail

Package: vlc
Status: purge ok not-installed
Priority: optional
Section: graphics

Package: openoffice.org-help-nl
Status: purge ok not-installed
Priority: optional
Section: doc

Package: openoffice.org-kde
Status: purge ok not-installed
Priority: optional
Section: kde

Package: mplayer
Status: purge ok not-installed
Priority: optional
Section: graphics

Package: php4-mcal
Status: purge ok not-installed
Priority: optional
Section: web

Package: netkit-inetd
Status: install ok installed
Priority: important
Section: net
Installed-Size: 136
Maintainer: Anthony Towns <ajt@debian.org>
Source: netkit-base
Version: 0.10-10
Replaces: netbase (<< 4.00)
Depends: libc6 (>= 2.3.2.ds1-4)
Suggests: debconf
Conffiles:
 /etc/init.d/inetd 85fffe0f5486475d8a92d456e905c0be
 /etc/cron.daily/netkit-inetd d68e035869ede8add7dedcc90fe3116a
Description: The Internet Superserver
 The inetd server is a network daemon program that specializes in managing
 incoming network connections. It's configuration file tells it what
 program needs to be run when an incoming connection is received. Any
 service port may be configured for either of the tcp or udp protcols.

Package: wvdial
Status: purge ok not-installed
Priority: optional
Section: comm

Package: php5
Status: purge ok not-installed
Priority: optional
Section: web

Package: php4
Status: purge ok not-installed
Priority: optional
Section: web

Package: emacs21-common
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-common
Status: purge ok not-installed
Priority: optional
Section: editors

Package: libpcap0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 188
Maintainer: Torsten Landschoff <torsten@debian.org>
Source: libpcap
Version: 0.6.2-2
Depends: libc6 (>= 2.2.3-7)
Conflicts: tcpdump (<< 3.5)
Description: System interface for user-level packet capture.
 libpcap (Packet CAPture) provides a portable framework for low-level
 network monitoring.  Applications include network statistics collection,
 security monitoring, network debugging, etc.
 .
 Since almost every system vendor provides a different interface for
 packet capture, and since there are several tools that require this
 functionality, we've created this system-independent API to ease in
 porting and to alleviate the need for several system-dependent packet
 capture modules in each application.
 .
 Further information is available at <URL: http://www.tcpdump.org/>

Package: openoffice.org-help-pl
Status: purge ok not-installed
Priority: optional
Section: doc

Package: libnss3-tools
Status: purge ok not-installed
Priority: optional
Section: admin

Package: mozilla-mailnews
Status: purge ok not-installed
Priority: optional
Section: mail

Package: libconsole
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 480
Maintainer: Alastair McKinstry <mckinstry@debian.org>
Source: console-tools
Version: 1:0.2.3dbs-56
Depends: libc6 (>= 2.3.2.ds1-4)
Conflicts: console-tools-libs
Description: Shared libraries for Linux console and font manipulation
 This package includes the libconsole and libcfont libraries, which
 are intended to provide a high-level programming interface to the
 Linux console, and console-font files.

Package: php5-ldap
Status: purge ok not-installed
Priority: optional
Section: web

Package: openoffice.org-l10n-sr-cs
Status: purge ok not-installed
Priority: optional
Section: editors

Package: libedataserver1.2-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: apt-utils
Status: install ok installed
Priority: optional
Section: admin
Installed-Size: 500
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: powerpc
Source: apt
Version: 0.5.28.6
Replaces: apt (<< 0.5.9)
Provides: libapt-inst-libc6.3-5-1.0
Depends: libapt-pkg-libc6.3-5-3.3, libc6 (>= 2.3.2.ds1-4), libdb4.2, libgcc1 (>= 1:3.4.1-3), libstdc++5 (>= 1:3.3.4-1)
Description: APT utility programs
 This package contains some APT utility programs such as apt-ftparchive,
 apt-sortpkgs and apt-extracttemplates.
 .
 apt-extracttemplates is used by debconf to prompt for configuration
 questions before installation. apt-ftparchive is used to create Package
 and other index files. apt-sortpkgs is a Package/Source file normalizer.

Package: openoffice.org-help-da
Status: purge ok not-installed
Priority: optional
Section: doc

Package: evolution-common
Status: purge ok not-installed
Priority: optional
Section: gnome

Package: openoffice.org-help-de
Status: purge ok not-installed
Priority: optional
Section: doc

Package: postgresql-pltcl-8.1
Status: purge ok not-installed
Priority: optional
Section: misc

Package: g++-3.3
Status: install ok installed
Priority: standard
Section: devel
Installed-Size: 4224
Maintainer: Debian GCC maintainers <debian-gcc@lists.debian.org>
Architecture: powerpc
Source: gcc-3.3
Version: 1:3.3.5-13
Replaces: gcc (<= 2.7.2.3-3)
Provides: c++-compiler
Depends: gcc-3.3-base (>= 1:3.3.5-13), libc6 (>= 2.3.2.ds1-21), gcc-3.3 (>= 1:3.3.5-13), gcc-3.3 (<< 1:3.3.6), libstdc++5-3.3-dev (>= 1:3.3.5-13)
Suggests: gcc-3.3-doc (>= 1:3.3.5-13)
Description: The GNU C++ compiler
 This is the GNU C++ compiler, a fairly portable optimizing compiler for C++.

Package: openoffice.org-help-dz
Status: purge ok not-installed
Priority: optional
Section: doc

Package: iceweasel-gnome-support
Status: purge ok not-installed
Priority: optional
Section: gnome

Package: php5-imap
Status: purge ok not-installed
Priority: optional
Section: web

Package: php5-mhash
Status: purge ok not-installed
Priority: optional
Section: web

Package: php4-pear
Status: purge ok not-installed
Priority: optional
Section: web

Package: openoffice.org-writer
Status: purge ok not-installed
Priority: optional
Section: editors

Package: bison
Status: install ok installed
Priority: standard
Section: devel
Installed-Size: 1372
Maintainer: Chuan-kai Lin <cklin@debian.org>
Version: 1:1.875d-1
Depends: m4, libc6 (>= 2.3.2.ds1-4)
Description: A parser generator that is compatible with YACC
 Bison is a general-purpose parser generator that converts a
 grammar description for an LALR(1) context-free grammar into a C
 program to parse that grammar.  Once you are proficient with Bison, you
 may use it to develop a wide range of language parsers, from those used
 in simple desk calculators to complex programming languages.
 .
 Bison is upward compatible with Yacc: all properly-written Yacc
 grammars ought to work with Bison with no change.  Anyone familiar with
 Yacc should be able to use Bison with little trouble.

Package: firefox-dom-inspector
Status: purge ok not-installed
Priority: optional
Section: web

Package: iptables
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 1444
Maintainer: Laurence J. Lane <ljlane@debian.org>
Version: 1.2.11-10
Depends: libc6 (>= 2.3.2.ds1-4)
Suggests: ipmasq, iproute
Description: Linux kernel 2.4+ iptables administration tools
 netfilter and iptables provide a Linux kernel framework for
 stateful and stateless packet filtering, network and port addresss
 translation, and other IP packet manipulation. The framework is the
 successor to ipchains.
 .
 netfilter and iptables are used in applications such as Internet
 connection sharing, firewalls, IP accounting, transparent proxying,
 advanced routing and traffic control.
 .
 iptables web site: http://www.iptables.org/

Package: clamav-daemon
Status: purge ok not-installed
Priority: optional
Section: utils

Package: bcfg2-server
Status: purge ok not-installed
Priority: optional
Section: admin

Package: bash
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 1376
Maintainer: Matthias Klose <doko@debian.org>
Source: bash (2.05b-2-26)
Version: 2.05b-26
Replaces: bash-doc (<= 2.05-1), bash-completion
Depends: base-files (>= 2.1.12), passwd (>= 1:4.0.3-10)
Pre-Depends: libc6 (>= 2.3.2.ds1-4), libncurses5 (>= 5.4-1)
Suggests: bash-doc
Conflicts: bash-completion
Conffiles:
 /etc/skel/.bashrc 006050225ddcf746105440fe2e239455
 /etc/skel/.bash_profile 7455657be214e67f36009154d3653e1b
 /etc/bash.bashrc 9f16decbed26218edf84cb649b0120bc
 /etc/bash_completion 9f68cca301c0dba4f2f48298bac3188a
Description: The GNU Bourne Again SHell
 Bash is an sh-compatible command language interpreter that executes
 commands read from the standard input or from a file.  Bash also
 incorporates useful features from the Korn and C shells (ksh and csh).
 .
 Bash is ultimately intended to be a conformant implementation of the
 IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2).
 .
 Included in the bash package is the Programmable Completion Code, by
 Ian Macdonald.

Package: make
Status: install ok installed
Priority: standard
Section: devel
Installed-Size: 1084
Maintainer: Manoj Srivastava <srivasta@debian.org>
Version: 3.80-9
Depends: libc6 (>= 2.3.2.ds1-4)
Description: The GNU version of the "make" utility.
 GNU Make is a program that determines which pieces of a large
 program need to be recompiled and issues the commands to recompile
 them, when necessary. More information about GNU Make can be
 found in the `make' Info page. The upstream sources for this package
 are available at the location ftp://ftp.gnu.org/gnu/make/

Package: util-linux
Essential: yes
Status: install ok installed
Priority: required
Section: base
Installed-Size: 1056
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: powerpc
Version: 2.12p-4sarge1
Replaces: miscutils, setterm, fdisk
Pre-Depends: libc6 (>= 2.3.2.ds1-21), libncurses5 (>= 5.4-1), libuuid1, slang1a-utf8 (>> 1.4.9dbs-4), zlib1g (>= 1:1.2.1)
Suggests: util-linux-locales, kbd | console-tools, dosfstools
Conflicts: setterm, fdisk, kbd (<< 1.05-3), console-tools (<< 1:0.2.3-21)
Conffiles:
 /etc/init.d/hwclock.sh 170893d12cf4dc00e913a914f75334fd
 /etc/init.d/hwclockfirst.sh 6c2b799b871045cd9e5101fa8fcf4ed8
Description: Miscellaneous system utilities
 This package contains a number of important utilities, most of which
 are oriented towards maintenance of your system.  Some of the more
 important utilities included in this package allow you to partition
 your hard disk, view kernel messages, and create new filesystems.

Package: libkrb53
Status: install ok not-installed
Priority: standard
Section: libs

Package: libwpd-stream8c2a
Status: purge ok not-installed
Priority: optional
Section: libs

Package: postgresql-plpython-7.4
Status: purge ok not-installed
Priority: optional
Section: misc

Package: reiserfsprogs
Status: purge ok not-installed
Priority: optional
Section: admin

Package: python-uno
Status: purge ok not-installed
Priority: optional
Section: python

Package: popularity-contest
Status: purge ok not-installed
Priority: optional
Section: misc

Package: ethereal-dev
Status: purge ok not-installed
Priority: optional
Section: devel

Package: m4
Status: install ok installed
Priority: standard
Section: interpreters
Installed-Size: 344
Maintainer: Santiago Vila <sanvila@debian.org>
Version: 1.4.2-1
Depends: libc6 (>= 2.3.2.ds1-4)
Description: a macro processing language
 GNU `m4' is an implementation of the traditional UNIX macro
 processor.  It is mostly SVR4 compatible, although it has some
 extensions (for example, handling more than 9 positional parameters to
 macros).  `m4' also has builtin functions for including files, running
 shell commands, doing arithmetic, etc.  Autoconf needs GNU `m4' for
 generating `configure' scripts, but not for running them.

Package: libedataserverui1.2-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: cpio
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 184
Maintainer: Brian Mays <brian@debian.org>
Version: 2.5-1.3
Replaces: cpio-mt
Depends: libc6 (>= 2.3.2.ds1-21)
Conflicts: mt-st (<< 0.6), cpio-mt
Description: GNU cpio -- a program to manage archives of files.
 GNU cpio is a tool for creating and extracting archives, or copying
 files from one place to another.  It handles a number of cpio formats
 as well as reading and writing tar files.

Package: aircrack-ng
Status: purge ok not-installed
Priority: optional
Section: net

Package: libstdc++3
Status: deinstall ok config-files
Priority: standard
Section: base
Installed-Size: 716
Maintainer: Debian GCC maintainers <debian-gcc@lists.debian.org>
Source: gcc-3.0 (1:3.0.4ds3-7)
Version: 1:3.0.4-7
Config-Version: 1:3.0.4-7
Depends: gcc-3.0-base, libc6 (>= 2.2.4-4), libgcc1 (>= 1:3.0.3-1)
Description: The GNU stdc++ library version 3
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.

Package: libstdc++5
Status: install ok installed
Priority: required
Section: base
Installed-Size: 904
Maintainer: Debian GCC maintainers <debian-gcc@lists.debian.org>
Source: gcc-3.3
Version: 1:3.3.5-13
Depends: gcc-3.3-base (>= 1:3.3.5-13), libc6 (>= 2.3.2.ds1-21), libgcc1 (>= 1:3.3.4-3)
Description: The GNU Standard C++ Library v3
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.

Package: openoffice.org-dev
Status: purge ok not-installed
Priority: optional
Section: devel

Package: maradns
Status: purge ok not-installed
Priority: extra
Section: net

Package: strace
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 240
Maintainer: Roland McGrath <frob@debian.org>
Version: 4.5.8-1.2
Depends: libc6 (>= 2.3.2.ds1-4)
Description: A system call tracer
 strace is a system call tracer, i.e. a debugging tool which prints out
 a trace of all the system calls made by a another process/program.
 The program to be traced need not be recompiled for this, so you can
 use it on binaries for which you don't have source.
 .
 System calls and signals are events that happen at the user/kernel
 interface. A close examination of this boundary is very useful for bug
 isolation, sanity checking and attempting to capture race conditions.

Package: inkscape
Status: purge ok not-installed
Priority: optional
Section: graphics

Package: thunderbird-dbg
Status: purge ok not-installed
Priority: optional
Section: mail

Package: binutils
Status: install ok installed
Priority: standard
Section: devel
Installed-Size: 6556
Maintainer: James Troup <james@nocrew.org>
Version: 2.15-6
Provides: elf-binutils
Depends: libc6 (>= 2.3.2.ds1-21)
Suggests: binutils-doc (= 2.15-6)
Conflicts: gas, elf-binutils, modutils (<< 2.4.19-1)
Description: The GNU assembler, linker and binary utilities
 The programs in this package are used to assemble, link and manipulate
 binary and object files.  They may be used in conjunction with a compiler
 and various libraries to build programs.

Package: openoffice.org-l10n-el
Status: purge ok not-installed
Priority: optional
Section: editors

Package: openoffice.org-l10n-eo
Status: purge ok not-installed
Priority: optional
Section: editors

Package: php5-mysql
Status: purge ok not-installed
Priority: optional
Section: web

Package: nvi
Status: install ok installed
Priority: important
Section: editors
Installed-Size: 648
Maintainer: Steve Greenland <stevegr@debian.org>
Version: 1.79-22
Depends: libc6 (>= 2.3.2.ds1-4), libncurses5 (>= 5.4-1)
Conffiles:
 /etc/init.d/nviboot 8768bfa8cb7737fafff82135c4207661
Description: 4.4BSD re-implementation of vi
 Vi is the original screen based text editor for Unix systems.
 It is considered the standard text editor, and is available on
 almost all Unix systems.
 .
 Nvi is intended as a "bug-for-bug compatible" clone of the original
 BSD vi editor. As such, it doesn't have a lot of snazzy features as do
 some of the other vi clones such as elvis and vim. However, if all
 you want is vi, this is the one to get.

Package: libmozillainterfaces-java
Status: purge ok not-installed
Priority: extra
Section: libdevel

Package: openoffice.org-l10n-et
Status: purge ok not-installed
Priority: optional
Section: editors

Package: libisc7
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 352
Maintainer: LaMont Jones <lamont@debian.org>
Architecture: powerpc
Source: bind9
Version: 1:9.2.4-1sarge2
Replaces: libbind0
Depends: libc6 (>= 2.3.2.ds1-21)
Conflicts: libbind0
Description: ISC Shared Library used by BIND
 The Berkeley Internet Name Domain (BIND) implements an Internet domain
 name server.  BIND is the most widely-used name server software on the
 Internet, and is supported by the Internet Software Consortium, www.isc.org.
 .
 This package delivers the libisc shared library used by BIND's daemons and
 clients.

Package: openoffice.org-l10n-es
Status: purge ok not-installed
Priority: optional
Section: editors

Package: libisc4
Status: install ok installed
Priority: standard
Section: net
Installed-Size: 348
Maintainer: Bdale Garbee <bdale@gag.com>
Source: bind9
Version: 1:9.2.1-2.woody.1
Replaces: libbind0
Depends: libc6 (>= 2.2.4-4)
Conflicts: libbind0
Description: ISC Shared Library used by BIND
 Delivers the libisc shared library used by BIND's daemons and clients.

Package: gcc-3.0-base
Status: purge ok not-installed
Priority: standard
Section: devel

Package: cpp-2.95
Status: purge ok not-installed
Priority: standard
Section: interpreters

Package: less
Status: install ok installed
Priority: standard
Section: text
Installed-Size: 276
Maintainer: Thomas Schoepf <schoepf@debian.org>
Version: 382-1
Depends: libc6 (>= 2.3.2.ds1-4), libncurses5 (>= 5.4-1), debianutils (>= 1.8)
Description: Pager program similar to more
 Less is a program similar to more(1), but which allows backward
 movement in the file as well as forward movement.  Also, less does not
 have to read the entire input file before starting, so with large input
 files it starts up faster than text editors like vi(1).  Less uses
 termcap (or terminfo on some systems), so it can run on a variety of
 terminals.  There is even limited support for hardcopy terminals.
 .
 Homepage: http://www.greenwoodsoftware.com/less/

Package: libfreetype6-dev
Status: purge ok not-installed
Priority: optional
Section: libdevel

Package: ipmasq
Status: purge ok not-installed
Priority: extra
Section: net

Package: libtext-charwidth-perl
Status: install ok installed
Priority: important
Section: perl
Installed-Size: 100
Maintainer: Tomohiro KUBOTA <kubota@debian.org>
Architecture: powerpc
Version: 0.04-1
Depends: libc6 (>= 2.3.1-1), perlapi-5.8.0, perl-base (>= 5.8.0-18)
Description: get display widths of characters on the terminal
 This module permits perl software to get the display widths of characters
 and strings on the terminal, using wcwidth() and wcswidth() from libc.
 .
 It provides mbwidth(), mbswidth(), and mblen().

Package: krb5-telnetd
Status: purge ok not-installed
Priority: extra
Section: net

Package: qt4-designer
Status: purge ok not-installed
Priority: optional
Section: kde

Package: ttf-opensymbol
Status: purge ok not-installed
Priority: optional
Section: x11

Package: libcap1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 68
Maintainer: Michael Vogt <mvo@debian.org>
Source: libcap
Version: 1:1.10-14
Depends: libc6 (>= 2.3.2.ds1-4)
Description: support for getting/setting POSIX.1e capabilities
 This library implements the user-space interfaces to the POSIX
 1003.1e capabilities available in Linux kernels.  These capabilities are
 a partitioning of the all powerful root privilege into a set of distinct
 privileges.  Note that it will not provide any functionality with kernels
 below 2.2

Package: libwpd8c2a
Status: purge ok not-installed
Priority: optional
Section: libs

Package: pptp-linux
Status: purge ok not-installed
Priority: optional
Section: net

Package: gimp-helpbrowser
Status: purge ok not-installed
Priority: optional
Section: graphics

Package: libgnutls11
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 696
Maintainer: Matthias Urlichs <smurf@debian.org>
Architecture: powerpc
Source: gnutls11
Version: 1.0.16-13.2sarge2
Replaces: gnutls0, gnutls3, gnutls0.4
Depends: libc6 (>= 2.3.2.ds1-21), libgcrypt11, libgpg-error0 (>= 1.0), liblzo1, libopencdk8 (>= 0.5.5), libtasn1-2 (>= 0.2.7), zlib1g (>= 1:1.2.1), libtasn1-2 (>= 0.2.10)
Suggests: gnutls-bin
Conflicts: gnutls0, gnutls0.4
Description: GNU TLS library - runtime library
 gnutls is a portable library which implements the Transport Layer
 Security (TLS) 1.0 and Secure Sockets Layer (SSL) 3.0 protocols.
 .
 Currently gnutls implements:
  - the TLS 1.0 and SSL 3.0 protocols, without any US-export
    controlled algorithms
  - X509 Public Key Infrastructure (with several limitations).
  - SRP for TLS authentication.
  - TLS Extension mechanism
 .
 This package contains the runtime libraries.

Package: mozilla-firefox-gnome-support
Status: purge ok not-installed
Priority: optional
Section: web

Package: libwrap0
Status: install ok installed
Priority: important
Section: base
Installed-Size: 92
Maintainer: Anthony Towns <ajt@debian.org>
Source: tcp-wrappers
Version: 7.6.dbs-8
Depends: libc6 (>= 2.3.2.ds1-4)
Recommends: tcpd
Conflicts: netbase (<< 3.16-1)
Description: Wietse Venema's TCP wrappers library
 Wietse Venema's network logger, also known as TCPD or LOG_TCP.
 .
 These programs log the client host name of incoming telnet,
 ftp, rsh, rlogin, finger etc. requests. Security options are:
 access control per host, domain and/or service; detection of
 host name spoofing or host address spoofing; booby traps to
 implement an early-warning system.

Package: linux-headers-2.6.18-4-all-powerpc
Status: purge ok not-installed
Priority: optional
Section: devel

Package: openoffice.org-l10n-gu-in
Status: purge ok not-installed
Priority: optional
Section: editors

Package: wordpress
Status: purge ok not-installed
Priority: optional
Section: web

Package: libstdc++5-3.3-dev
Status: install ok installed
Priority: standard
Section: libdevel
Installed-Size: 4716
Maintainer: Debian GCC maintainers <debian-gcc@lists.debian.org>
Architecture: powerpc
Source: gcc-3.3
Version: 1:3.3.5-13
Provides: libstdc++-dev
Depends: gcc-3.3-base (>= 1:3.3.5-13), libstdc++5 (>= 1:3.3.5-13), libc6-dev (>= 2.3.2.ds1-16), g++-3.3 (>= 1:3.3.5-13)
Suggests: libstdc++5-3.3-doc, stl-manual
Conflicts: libg++27-dev, libg++272-dev (<< 2.7.2.8-1), libstdc++2.8-dev, libg++2.8-dev, libstdc++2.9-dev, libstdc++2.9-glibc2.1-dev, libstdc++2.10-dev (<< 1:2.95.3-2), libstdc++3.0-dev, libstdc++5-dev (<= 1:3.2.3-0pre3)
Description: The GNU Standard C++ Library v3 (development files)
 This package contains the headers and static library files necessary for
 building C++ programs which use libstdc++. Be advised that this only works
 with the GNU C++ compiler (version 3.0), and no earlier library will work it.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.

Package: lsof
Status: install ok installed
Priority: standard
Section: utils
Installed-Size: 556
Maintainer: Jim Mintha <jmintha@debian.org>
Version: 4.74.dfsg.3-2
Replaces: lsof-2.2 (<< 4.73), lsof-2.0.35, lsof-2.0.36, lsof-2.0.38
Depends: libc6 (>= 2.3.2.ds1-4)
Conflicts: suidmanager (<< 0.50)
Description: List open files.
 Lsof is a Unix-specific diagnostic tool.  Its name stands
 for LiSt Open Files, and it does just that.  It lists
 information about any files that are open, by processes
 currently running on the system.

Package: liblockfile1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 96
Maintainer: Miquel van Smoorenburg <miquels@cistron.nl>
Source: liblockfile
Version: 1.06
Depends: libc6 (>= 2.3.2.ds1-4)
Description: NFS-safe locking library, includes dotlockfile program
 Liblockfile is a shared library with NFS-safe locking functions. It
 includes the command-line utility ``dotlockfile''.

Package: openoffice.org-help-cs
Status: purge ok not-installed
Priority: optional
Section: doc

